Javascript must be enabled to continue!
FREE-HAND PLACEMENT OF C7 PEDICLE SCREWS: A CADAVERIC STUDY
View through CrossRef
Objective : To evaluate the accuracy of free-hand pedicle screws placement at the seventh cervical vertebra. Methods : The authors have exposed the cervicothoracic junction of 9 adult cadavers (7 male and 2 female) preserved in formalin from the Faculty of Medicine of the Universidad Andina Néstor Cáceres Velásquez, city of Juliaca, Puno - Peru, locating the C7 vertebra based on anatomical parameters. According to previous publications, the entry point for the C7 pedicle was determined as 3-4mm lateral and 5-6mm superior to the center of the lateral mass, and the pedicle was drilled manually and instrumented with 3.5mm screws. After the screws placement, the C7 vertebrae were removed for radiographic analysis. Results : The authors were able to adequately locate the C7 entry point in 12 pedicles (66.6% accuracy), finding a great variability both laterally (2-5mm) and cranially (3-10mm). The angulation in the coronal plane was correct in 13 pedicles (72.3%), despite the incorrect location of the entry point. Angle values in the coronal plane ranged from 38 to 62 degrees. In the sagittal plane angulation, 2 screws were placed in the C6-C7 disc. The midtransversal diameter of the 18 pedicles ranged from 4 to 7mm. Conclusions : The location of the entry point for placement of C7 pedicle screws with pure free-hand technique is very variable due to anatomical differences and the authors recommend some type of guidance for increased safety and accuracy.
Title: FREE-HAND PLACEMENT OF C7 PEDICLE SCREWS: A CADAVERIC STUDY
Description:
Objective : To evaluate the accuracy of free-hand pedicle screws placement at the seventh cervical vertebra.
Methods : The authors have exposed the cervicothoracic junction of 9 adult cadavers (7 male and 2 female) preserved in formalin from the Faculty of Medicine of the Universidad Andina Néstor Cáceres Velásquez, city of Juliaca, Puno - Peru, locating the C7 vertebra based on anatomical parameters.
According to previous publications, the entry point for the C7 pedicle was determined as 3-4mm lateral and 5-6mm superior to the center of the lateral mass, and the pedicle was drilled manually and instrumented with 3.
5mm screws.
After the screws placement, the C7 vertebrae were removed for radiographic analysis.
Results : The authors were able to adequately locate the C7 entry point in 12 pedicles (66.
6% accuracy), finding a great variability both laterally (2-5mm) and cranially (3-10mm).
The angulation in the coronal plane was correct in 13 pedicles (72.
3%), despite the incorrect location of the entry point.
Angle values in the coronal plane ranged from 38 to 62 degrees.
In the sagittal plane angulation, 2 screws were placed in the C6-C7 disc.
The midtransversal diameter of the 18 pedicles ranged from 4 to 7mm.
Conclusions : The location of the entry point for placement of C7 pedicle screws with pure free-hand technique is very variable due to anatomical differences and the authors recommend some type of guidance for increased safety and accuracy.
Related Results
Stiffness Comparisons of SOP Interlocking Plate Configurations in 3D Printed Canine Lumbosacral Vertebrae
Stiffness Comparisons of SOP Interlocking Plate Configurations in 3D Printed Canine Lumbosacral Vertebrae
There are no published biomechanical studies evaluating the effect of stabilization techniques on the stability of the 3D printed models of the canine lumbosacral junction. The p...
Pull-out strength of cemented solidversusfenestrated pedicle screws in osteoporotic vertebrae
Pull-out strength of cemented solidversusfenestrated pedicle screws in osteoporotic vertebrae
ObjectivesCement augmentation of pedicle screws could be used to improve screw stability, especially in osteoporotic vertebrae. However, little is known concerning the influence of...
The Evaluation of a Novel Three-Dimensional Printed Expandable Pedicle Screw Sleeve Insert
The Evaluation of a Novel Three-Dimensional Printed Expandable Pedicle Screw Sleeve Insert
When used in combination with decompression, spinal fusion is a successful procedure for treating patients with spinal stenosis and degenerative spondylolisthesis. While a number o...
Variables Associated With Loss of Fixation of Retrograde Rami Screws in Minimally Displaced Lateral Compression Type 1 Pelvic Ring Injuries
Variables Associated With Loss of Fixation of Retrograde Rami Screws in Minimally Displaced Lateral Compression Type 1 Pelvic Ring Injuries
OBJECTIVES:
To evaluate variables associated with loss of fixation of retrograde rami screws in the treatment of stress-positive minimally displaced lateral compression...
Pullout strength of monocortical and bicortical screws in meta -physeal and diaphyseal regions of the canine humerus
Pullout strength of monocortical and bicortical screws in meta -physeal and diaphyseal regions of the canine humerus
Summary
Objective: Monocortical screws are commonly employed in locking plate fixation, but specific recommendations for their placement are lacking and use of short mono...
Reoperation for Misplaced Pedicle Screws: A Multicenter Retrospective Study
Reoperation for Misplaced Pedicle Screws: A Multicenter Retrospective Study
Study Design.
A multicenter retrospective analysis.
Objective.
This study aims to investigate reoperation of misplaced ped...
Smart Device Based Application for Rod Determination in Minimal Invasive Spine Surgery
Smart Device Based Application for Rod Determination in Minimal Invasive Spine Surgery
In orthopaedic spine surgery pedicle screw systems are used for stabilisation of the spine after injuries or disorders. With an percutaneous operation method surgeons are faced wit...
Minimizing Pedicle Screw Pullout Risks
Minimizing Pedicle Screw Pullout Risks
Study Design:
Detailed biomechanical analysis of the anchorage performance provided by different pedicle screw designs and placement strategies under pullout loading.
...

