Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy

View through CrossRef
Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting. Almost all prior research on cantilever beam shapes aimed at enhancing energy output accounts for beams fully coated with piezoelectric materials. While a larger coating area, up to a certain limit, can enhance energy output, it also escalates the cost of the structure, as piezoelectric materials are very expensive. Output power density over the length of the beam/piezoelectric material varies significantly. Hence, a partially coated beam with an optimized positioning of piezoelectric material can not only cut the cost of the system but also warrant a higher output power density. On the other hand, optimizing the base beam shape always remains one of the top approaches to increasing the power output. As such, this work aims to select a cantilever beam design by investigating a wide variety of cantilever beam shapes while the beam is partially coated with the piezoelectric material to maximize the power output capacity of the harvester. In the first part of the study, an efficient size of the piezoelectric material and its placement in the host beam are selected based on the power capacity of the system. Next, the selected effective size and placement of the piezoelectric material is implemented in a wide range of cantilever beam shapes (e.g., trapezoidal, triangular, V-cut, concave, and convex) to select a host beam design for maximizing the output power density. To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester. The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density. Additionally, an analysis is conducted to validate that the findings/selection of this study are independent of the thickness of the host beam or piezoelectric material.
Title: Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Description:
Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting.
Almost all prior research on cantilever beam shapes aimed at enhancing energy output accounts for beams fully coated with piezoelectric materials.
While a larger coating area, up to a certain limit, can enhance energy output, it also escalates the cost of the structure, as piezoelectric materials are very expensive.
Output power density over the length of the beam/piezoelectric material varies significantly.
Hence, a partially coated beam with an optimized positioning of piezoelectric material can not only cut the cost of the system but also warrant a higher output power density.
On the other hand, optimizing the base beam shape always remains one of the top approaches to increasing the power output.
As such, this work aims to select a cantilever beam design by investigating a wide variety of cantilever beam shapes while the beam is partially coated with the piezoelectric material to maximize the power output capacity of the harvester.
In the first part of the study, an efficient size of the piezoelectric material and its placement in the host beam are selected based on the power capacity of the system.
Next, the selected effective size and placement of the piezoelectric material is implemented in a wide range of cantilever beam shapes (e.
g.
, trapezoidal, triangular, V-cut, concave, and convex) to select a host beam design for maximizing the output power density.
To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester.
The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density.
Additionally, an analysis is conducted to validate that the findings/selection of this study are independent of the thickness of the host beam or piezoelectric material.

Related Results

An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
Abstract The most conventional configuration for vibration-based piezoelectric energy harvesting is cantilever beams. Researchers are continuously striving to enhanc...
Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Abstract The cantilever beam structure is the most conventional setup for strain-driven energy harvesting. While energy harvesting has found tremendous focus in many...
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power ou...
Bifurcation, chaos, and scan instability in dynamic atomic force microscopy
Bifurcation, chaos, and scan instability in dynamic atomic force microscopy
The dynamical motion at any point on the cantilever of an atomic force microscope can be expressed quite generally as a superposition of simple harmonic oscillators corresponding t...
Analysis of bimorph piezoelectric beam energy harvesters using superconvergent element
Analysis of bimorph piezoelectric beam energy harvesters using superconvergent element
Cantilever-based piezoelectric energy harvesters have been utilized as structures to extract mechanical energy from the ambient mechanical vibrations and transfer it into the elect...
POWER-EFFICIENT VLSI DESIGN: STRATEGIES FOR LOW-POWER APPLICATIONS
POWER-EFFICIENT VLSI DESIGN: STRATEGIES FOR LOW-POWER APPLICATIONS
“Power-Efficient VLSI Design: Strategies for Low-Power Applications” is a comprehensive guide that explores the intricacies of designing energy-efficient integrated circuits, addre...
Applications of Sustainable Hybrid Energy Harvesting: A Review
Applications of Sustainable Hybrid Energy Harvesting: A Review
This paper provides a short review of sustainable hybrid energy harvesting and its applications. The potential usage of self-powered wireless sensor (WSN) systems has recently draw...

Back to Top