Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting

View through CrossRef
Abstract The most conventional configuration for vibration-based piezoelectric energy harvesting is cantilever beams. Researchers are continuously striving to enhance both the power capacity and bandwidth. While conventionally rectangular cantilever beams are used for cantilever energy harvesting, research has shown that rectangular shapes are not the ideal one for maximum power density. A lot of investigation has previously been carried out to optimize beam shapes. However, most of those previous studies cover trapezoidal and triangular beam shapes. This warrants the study of other beam shapes including concave and convex-shaped beams. In this work, concave and convex-shaped cantilever beam energy harvesters were investigated with varying geometric configurations. The output power from each shape was examined by altering the ratio of the beam’s middle width to the base width while keeping the thickness, surface areas, volume, and mass of the beam. The piezoelectric material attached to the beam followed a similar approach to mitigate the impact of PZT on the beam’s power capacity as it serves as the energy conversion medium. Such an approach was required to understand the true influence of concave and convex cantilever shapes on energy harvesting. One-third of the beam surface area was coated with piezoelectric material following the uni-morph setting. The coating of piezoelectric material on the beam was provided at its fixed end to obtain the maximum power out of piezoelectric material. Due to the significant influence of the geometric configuration of the beam on output power, it has been expressed in terms of power density. Furthermore, the resonant frequency of each shape was explored, as the output from the cantilever energy harvester attains its maximum at the resonant frequency of each specific shape. Results of the study revealed that a convex cantilever beam can achieve a superior output power density compared to concave and standard rectangular beams while utilizing an identical volume of beam and piezoelectric material. This holds particularly when the piezoelectric coating is applied near the fixed end. It is worth highlighting that in cases where the piezoelectric layer is near the fixed end, the power output is predominantly influenced by the base width of the beam, with a lower base width corresponding to higher output power density.
Title: An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
Description:
Abstract The most conventional configuration for vibration-based piezoelectric energy harvesting is cantilever beams.
Researchers are continuously striving to enhance both the power capacity and bandwidth.
While conventionally rectangular cantilever beams are used for cantilever energy harvesting, research has shown that rectangular shapes are not the ideal one for maximum power density.
A lot of investigation has previously been carried out to optimize beam shapes.
However, most of those previous studies cover trapezoidal and triangular beam shapes.
This warrants the study of other beam shapes including concave and convex-shaped beams.
In this work, concave and convex-shaped cantilever beam energy harvesters were investigated with varying geometric configurations.
The output power from each shape was examined by altering the ratio of the beam’s middle width to the base width while keeping the thickness, surface areas, volume, and mass of the beam.
The piezoelectric material attached to the beam followed a similar approach to mitigate the impact of PZT on the beam’s power capacity as it serves as the energy conversion medium.
Such an approach was required to understand the true influence of concave and convex cantilever shapes on energy harvesting.
One-third of the beam surface area was coated with piezoelectric material following the uni-morph setting.
The coating of piezoelectric material on the beam was provided at its fixed end to obtain the maximum power out of piezoelectric material.
Due to the significant influence of the geometric configuration of the beam on output power, it has been expressed in terms of power density.
Furthermore, the resonant frequency of each shape was explored, as the output from the cantilever energy harvester attains its maximum at the resonant frequency of each specific shape.
Results of the study revealed that a convex cantilever beam can achieve a superior output power density compared to concave and standard rectangular beams while utilizing an identical volume of beam and piezoelectric material.
This holds particularly when the piezoelectric coating is applied near the fixed end.
It is worth highlighting that in cases where the piezoelectric layer is near the fixed end, the power output is predominantly influenced by the base width of the beam, with a lower base width corresponding to higher output power density.

Related Results

Analysis of Vibration and Buckling in Composite Cantilever Beams, Taking Consideration of both Pristine and Cracked Configurations
Analysis of Vibration and Buckling in Composite Cantilever Beams, Taking Consideration of both Pristine and Cracked Configurations
Introduction:Through the excellent strength-to-weight ratio and design flexibility, composite cantilever beams have found ever-widening applications in diverse areas of engineering...
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting. Almost all prior research on cantilever beam shapes aimed at enhancing...
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
Piezoelectric elements are commonly installed in shoe sole to make use of the piezoelectric effect due to the vibration generated by the human motion. Piezoelectric shoe is a great...
Design and test of liquid sloshing piezoelectric energy harvester
Design and test of liquid sloshing piezoelectric energy harvester
The energy harvester based on the piezoelectric effect can convert the vibration energy in the environment into electricity to power the network nodes. In order to broaden the effe...
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power ou...
Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Abstract The cantilever beam structure is the most conventional setup for strain-driven energy harvesting. While energy harvesting has found tremendous focus in many...
Hybrid-Bistable Vibration Energy Harvester With Adaptive Potential Well
Hybrid-Bistable Vibration Energy Harvester With Adaptive Potential Well
Many common environmental vibration sources exhibit low and broad frequency spectra. In order to exploit such excitations, energy harvesting architectures utilizing nonlinearity, e...
Piezoelectric ceramic materials on transducer technology for energy harvesting: A review
Piezoelectric ceramic materials on transducer technology for energy harvesting: A review
Recently, energy harvesting through the means of piezoelectric transducer technology has increasingly attracted the attention of engineers and scientists in producing/generating el...

Back to Top