Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester

View through CrossRef
Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power output from cantilever-beam-driven piezoelectric energy harvesters, a systematic and fundamental analysis of the effect of beam geometry on the power capacity of energy harvesters warrants further investigation. Most of the previous research accounts for beams that are fully coated with piezoelectric material. While a larger coating area increases energy output, it also escalates costs as piezoelectric materials are very expensive. Considering the high cost of piezoelectric materials when dealing with limited piezoelectric material, enhancing power output can be achieved by employing a larger base beam and coating a portion of it at the fixed end. As such, the aim of this work is to investigate a wide variety of cantilever beam shapes (e.g., trapezoidal, triangular, V-cut, concave, and convex) with partial piezoelectric material coating on the base beam to maximize the power output capacity of the harvester. To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester. The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density. Finally, the power capacities of all types of beams are compared, and a design is proposed to obtain the maximum power output. It was found that when the surface area of both the beam and piezoelectric material is kept constant and piezoelectric material is located at the fixed end, a trapezoidal beam with a smaller base width and larger free end width is the most efficient in generating power as long as the structural integrity is maintained. The finding is completely opposite as was suggested by previous studies, which proposed that a trapezoidal beam with a smaller free end yields higher output. Instead, this study demonstrates that an inverted trapezoidal beam produced higher output, considering partial coating compared to the full beam coating used in previous studies. Additionally, a correlation is presented on how the beam resonance frequency shifts with variation in beam parameters.
Title: A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
Description:
Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials.
Although researchers are constantly seeking improved power output from cantilever-beam-driven piezoelectric energy harvesters, a systematic and fundamental analysis of the effect of beam geometry on the power capacity of energy harvesters warrants further investigation.
Most of the previous research accounts for beams that are fully coated with piezoelectric material.
While a larger coating area increases energy output, it also escalates costs as piezoelectric materials are very expensive.
Considering the high cost of piezoelectric materials when dealing with limited piezoelectric material, enhancing power output can be achieved by employing a larger base beam and coating a portion of it at the fixed end.
As such, the aim of this work is to investigate a wide variety of cantilever beam shapes (e.
g.
, trapezoidal, triangular, V-cut, concave, and convex) with partial piezoelectric material coating on the base beam to maximize the power output capacity of the harvester.
To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester.
The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density.
Finally, the power capacities of all types of beams are compared, and a design is proposed to obtain the maximum power output.
It was found that when the surface area of both the beam and piezoelectric material is kept constant and piezoelectric material is located at the fixed end, a trapezoidal beam with a smaller base width and larger free end width is the most efficient in generating power as long as the structural integrity is maintained.
The finding is completely opposite as was suggested by previous studies, which proposed that a trapezoidal beam with a smaller free end yields higher output.
Instead, this study demonstrates that an inverted trapezoidal beam produced higher output, considering partial coating compared to the full beam coating used in previous studies.
Additionally, a correlation is presented on how the beam resonance frequency shifts with variation in beam parameters.

Related Results

Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Influence of Beam Geometry on the Power Capacity of a Cantilever Beam Based Energy Harvester
Abstract The cantilever beam structure is the most conventional setup for strain-driven energy harvesting. While energy harvesting has found tremendous focus in many...
Faktor-Faktor yang Mempengaruhi Adopsi Petani Terhadap Teknologi Combine Harvester
Faktor-Faktor yang Mempengaruhi Adopsi Petani Terhadap Teknologi Combine Harvester
Abstrak.Pembangunan pertanian memiliki tugas utama yang salah satunya adalah menemukan metode atau cara bagi pertanian untuk dapat dipraktikkan secara efektif oleh petani. Pembangu...
Design and test of liquid sloshing piezoelectric energy harvester
Design and test of liquid sloshing piezoelectric energy harvester
The energy harvester based on the piezoelectric effect can convert the vibration energy in the environment into electricity to power the network nodes. In order to broaden the effe...
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting. Almost all prior research on cantilever beam shapes aimed at enhancing...
Simulation analysis of dynamic response of the energy harvester based on diamagnetic levitation
Simulation analysis of dynamic response of the energy harvester based on diamagnetic levitation
Based on diamagnetic levitation, the micro-vibration energy harvester is proposed, which has advantages such as low friction, low mechanical damping, low-frequency response and fre...
An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
Abstract The most conventional configuration for vibration-based piezoelectric energy harvesting is cantilever beams. Researchers are continuously striving to enhanc...
Theoretical Study on Widening Bandwidth of Piezoelectric Vibration Energy Harvester with Nonlinear Characteristics
Theoretical Study on Widening Bandwidth of Piezoelectric Vibration Energy Harvester with Nonlinear Characteristics
In order to make a piezoelectric vibration energy harvester collect more energy on a broader frequency range, nonlinearity is introduced into the system, allowing the harvester to ...
A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams
A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams
Vibration-energy harvesting is an effective strategy for replacing batteries and provides a long-term power supply to microelectronic devices. Harvesting vibration energy from huma...

Back to Top