Javascript must be enabled to continue!
Analysis of bimorph piezoelectric beam energy harvesters using superconvergent element
View through CrossRef
Cantilever-based piezoelectric energy harvesters have been utilized as structures to extract mechanical energy from the ambient mechanical vibrations and transfer it into the electrical output. In this article, the performance of bimorph piezoelectric beam energy harvesters is investigated. The cantilever beam is modeled by using both Timoshenko and Euler–Bernoulli beam theories. The equations are discretized using the conventional finite element method and superconvergent element. Besides the high rate of convergence, easy switching between the above beam theories is enabled by such type of element. The current model is presented for a Timoshenko beam model, but it could as well be used for a Euler–Bernoulli beam model. In addition, voltage, current, and power frequency response functions for different ranges of load resistance varying from the short-circuit to open-circuit conditions are determined to reach the maximum values. Effects of the slenderness ratio and the required beam model based on the geometric properties of the piezoelectric energy harvesters are discussed in the final part of this study. The results show that only for smaller values of the slenderness ratio (below 5), it is necessary to model the beam using the Timoshenko assumptions; otherwise both beam theories provide approximately the same responses.
Title: Analysis of bimorph piezoelectric beam energy harvesters using superconvergent element
Description:
Cantilever-based piezoelectric energy harvesters have been utilized as structures to extract mechanical energy from the ambient mechanical vibrations and transfer it into the electrical output.
In this article, the performance of bimorph piezoelectric beam energy harvesters is investigated.
The cantilever beam is modeled by using both Timoshenko and Euler–Bernoulli beam theories.
The equations are discretized using the conventional finite element method and superconvergent element.
Besides the high rate of convergence, easy switching between the above beam theories is enabled by such type of element.
The current model is presented for a Timoshenko beam model, but it could as well be used for a Euler–Bernoulli beam model.
In addition, voltage, current, and power frequency response functions for different ranges of load resistance varying from the short-circuit to open-circuit conditions are determined to reach the maximum values.
Effects of the slenderness ratio and the required beam model based on the geometric properties of the piezoelectric energy harvesters are discussed in the final part of this study.
The results show that only for smaller values of the slenderness ratio (below 5), it is necessary to model the beam using the Timoshenko assumptions; otherwise both beam theories provide approximately the same responses.
Related Results
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
A Comprehensive Study to Select a Cost-Effective Beam Design for Maximizing Power Density in a Cantilever Beam-Based Energy Harvester
Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power ou...
An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
An Analysis of Concave and Convex Shaped Cantilever Beams On Vibration-Based Piezoelectric Energy Harvesting
Abstract
The most conventional configuration for vibration-based piezoelectric energy harvesting is cantilever beams. Researchers are continuously striving to enhanc...
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy
Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting. Almost all prior research on cantilever beam shapes aimed at enhancing...
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
Piezoelectric elements are commonly installed in shoe sole to make use of the piezoelectric effect due to the vibration generated by the human motion. Piezoelectric shoe is a great...
Design and test of liquid sloshing piezoelectric energy harvester
Design and test of liquid sloshing piezoelectric energy harvester
The energy harvester based on the piezoelectric effect can convert the vibration energy in the environment into electricity to power the network nodes. In order to broaden the effe...
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
This article presents a constitutive model for piezoelectric paint that addresses its special characteristics such as mixed connectivity and air void content. Piezoelectric paint i...
Applications of Sustainable Hybrid Energy Harvesting: A Review
Applications of Sustainable Hybrid Energy Harvesting: A Review
This paper provides a short review of sustainable hybrid energy harvesting and its applications. The potential usage of self-powered wireless sensor (WSN) systems has recently draw...
Modelling of the Coupled Beam-Piezoelectric Material With Hysteresis Non-Linerity Effect
Modelling of the Coupled Beam-Piezoelectric Material With Hysteresis Non-Linerity Effect
Hysteresis is one of the non-linearity characteristics of the piezoelectric material. This characteristic is important to be characterized since it can affect the performance of th...

