Javascript must be enabled to continue!
Noise Annoyance Produced by Commercial Vehicles Transit on Rumble Strips
View through CrossRef
This paper reports on research examining the extent of noise annoyance affecting residents within the vicinity of installation of two types of transverse rumble strips (TRS), namely Middle Overlapped (MO) and Multilayer Overlapping (MLO). In order to assess the noise annoyance in the area, measurements were taken at 7.5m from centre of road with TRS installation using single vehicle test to determine the extent of changes of sound level indices and sound spectrum. Two light and two medium weight commercial vehicles were used. Indicators LAeq, LAFmax, LAImax, LAIeq, and LASmax were used to determine impulsivity that led to noise annoyance. The results showed that, at 30 km/h, all commercial vehicles considered in this study that transited on MO produced impulsive noise, while only light commercial vehicles caused noise annoyance when they transited on MLO. The research also analysed the extent of low-frequency noise and found a significant low-frequency component, which indicated that noise annoyance might arise from the hitting of MO and MLO by the commercial vehicles. For night-time related annoyance, it was suggested that an additional weighting factor could be added to the average A-weighted value during night-time.
Title: Noise Annoyance Produced by Commercial Vehicles Transit on Rumble Strips
Description:
This paper reports on research examining the extent of noise annoyance affecting residents within the vicinity of installation of two types of transverse rumble strips (TRS), namely Middle Overlapped (MO) and Multilayer Overlapping (MLO).
In order to assess the noise annoyance in the area, measurements were taken at 7.
5m from centre of road with TRS installation using single vehicle test to determine the extent of changes of sound level indices and sound spectrum.
Two light and two medium weight commercial vehicles were used.
Indicators LAeq, LAFmax, LAImax, LAIeq, and LASmax were used to determine impulsivity that led to noise annoyance.
The results showed that, at 30 km/h, all commercial vehicles considered in this study that transited on MO produced impulsive noise, while only light commercial vehicles caused noise annoyance when they transited on MLO.
The research also analysed the extent of low-frequency noise and found a significant low-frequency component, which indicated that noise annoyance might arise from the hitting of MO and MLO by the commercial vehicles.
For night-time related annoyance, it was suggested that an additional weighting factor could be added to the average A-weighted value during night-time.
Related Results
The Effectiveness of Longitudinal Rumble Strips on Indiana Roads
The Effectiveness of Longitudinal Rumble Strips on Indiana Roads
Rumble strips are designed and deployed to reduce run-off-road and head-on crashes by alerting drivers about near-lane departures. Although they have been widely used, their operat...
Longitudinal Analysis of the Influence of Personality on Noise Annoyance and Bidirectional Effects between Noise and Health Outcomes
Longitudinal Analysis of the Influence of Personality on Noise Annoyance and Bidirectional Effects between Noise and Health Outcomes
Background:
Long-term noise annoyance can be expected to have worse outcomes than short-term annoyance. This study investigates noise annoyance over time, its a...
Analisis Pengaruh Rumble Strips dalam Mereduksi Kecepatan Kendaraan
Analisis Pengaruh Rumble Strips dalam Mereduksi Kecepatan Kendaraan
The number of traffic accidents has increased every year, especially in Jambi City. One of the government's efforts to reduce the number of traffic accidents is to make regulations...
Impact of Rumble Strips on Longitudinal Joint Pavement Performance
Impact of Rumble Strips on Longitudinal Joint Pavement Performance
Milled centerline rumble strips are commonly used to reduce lane departure crashes. Safety benefits of installing rumble strips are viewed as a higher priority than the potential i...
Evaluation of Football Shaped Rumble Strips Versus Rectangular Rumble Strips
Evaluation of Football Shaped Rumble Strips Versus Rectangular Rumble Strips
Shoulder and centerline rumble strips have become predominantly used safety measures along American highways in almost all states and in Canadian provinces. Milled shoulder rumble ...
Road traffic noise, noise sensitivity, noise annoyance, psychological and physical health and mortality
Road traffic noise, noise sensitivity, noise annoyance, psychological and physical health and mortality
Abstract
Background
Both physical and psychological health outcomes have been associated with exposure to environmental n...
Rumble Strips: A Human Factors Perspective towards a Sustainable Road System
Rumble Strips: A Human Factors Perspective towards a Sustainable Road System
Prior research substantiates the belief that human factors contribute to up to 90% of all traffic accidents. The failure to consider cognitive ergonomics in road safety initiatives...
Effectiveness and External Noise of Transverse Rumble Strip Designs
Effectiveness and External Noise of Transverse Rumble Strip Designs
The report presents a case study motivated by comments and concerns from residents regarding high levels of noise originating from vehicles passing transverse rumble strips at the ...

