RESULTS OF TESTING OF MODERN INDIVIDUAL MILKING INSTALLATION

The purpose of the research: comprehensive assessment of the individual milking unit of the company "Kurtsan" (Turkey) during operation. Methods of research: Analysis of the structural features of the individual milking unit performed by the observation method given to test sample, the quality of the machine was evaluated by standardized methods: the quality of the technological process and operational-technological indicators in accordance with the SOU 74.3-37-273, energy indices according to DSTU 2331, economic Indicators according to DSTU 4397, safety indicators and ergonomics according to DSTU IEES 60335-1, DSTU EN 60335-2-70. Research Results: The conducted research confirms a sufficiently high quality of the technological process of selection of milk in cows in the conditions of use of milking installation in a personal economy, which provides favorable conditions for the milking of the cow, taking into account its physiological features. Performance per hour of basic time is 10 heads. Milking installation works on the principle of a closed milking system, thanks to which milk does not contact the environment and immediately from the basin enters a sealed can. Such system protects milk from the possibility of bacterial and physical contamination. Milk obtained during milking by milking installation according to quality indicators (acidity, density, content of somatic cells, mass fraction of dry matter, mass fraction of fat) meets the requirements for the first grade according to DSTU 3662. Milking installation is equipped with a dry vacuum pump. Power consumption during installation does not exceed 0.54 kW. Specific electricity consumption for milking of one cow is 0.05 kWh / head. Annual operating expenses for milking of two cows in the farm are 1591.90 UAH / head. Conclusions. According to the testing of the individual milking plant manufacturing company "KURTSAN", it has been established that this installation reliably performs the technological process of machine milking of cows in milking can for their tethered maintenance and allows you to get milk of the first grade. The total duration of visiting one cow is 5.75 minutes. The average intensity of milk is 1.0 kg / min. Milking machine provides complete bodies of cows. The magnitude of the control manual feed is 50 ml. The milking machine is equipped with an adjustable pulsator of pairwise milking, which creates a manual milking process and works for a working vacuum of 40 ± 1 kPa, which prevents injury to dies and diseases of mastitis. In the cover the "Stop-Milk" system is installed, which prevents milk from entering a vacuum pump during the overflow of the poor, or water while washing All items are compactly assembled on a single cart. However, a small diameter of wheels on an unequal surface creates some inconvenience to the operator during the transportation of the machine with a filled milk capacity. The application of the installation increases the amount of milk received. Its gentle work does not harm the emotional and physical health of the cow: the dysfunctions during operation are not pushed, and light vibration creates a massage effect. Milking installation allows you to significantly reduce the labor of service personnel in an economy with a maintenance of 1 to 10 cows.