Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Three-dimensional numerical simulation of crystal growth using TSM under g-jitter conditions

View through CrossRef
The goal of this thesis is to study the effect of residual gravity on crystal growth of Silicon Germanium GE0.98 Si0.02 using the Traveling Heater Method (THM). This method has proven to be one of the most efficient techniques to grow high-quality crystals because it can be grown at relatively low temperatures compared to existing crystal growth techniques. Yet, because of natural convection due to earth's gravity, imperfection in terms of silicon distribution along the growth interface occurs. By growing crystals in a space environment, residual gravity represented by a static microgravity component and a sinusoidal component would decrease the intensity of the convective flow, which in return would lead to a more uniform silicon distribution. However, g-jitter fluctuation has proven to have a noticeable effect on the silicon distribution. Therefore, as an initial step to understand the behavior of crystal growth in space, each component of the g-jitter force will be studied thoroughly. The momentum, mass and energy equations, representing the 3D TSM model, were solved using finite element means. The preliminary results indicate that the complexity and the intensity of the silicon distribution along the growth interface are proportional to the convective flow, that partially controls the migration of silicon. Therefore, the quality of the crystal growth is assessed based on the behavior of the flow along the solvent regime. Based on the imposed static gravity in the range of 10-6 go to 10-3 go, the flow was determined to be in a diffusion mode with a velocity ranging from 10-6 cm/sec to 10-3 cm/sec. As a matter of fact, the flow intensity was noted to be positively proportional to the dominant component of both the static and the amplitude of the imposed g-jitter and negatively proportional to the frequency of the sinusoidal g-jitter. Consequently, realistic space growth conditions have proven to be an effective way of producing a homogeneous crystal since a flawless crystal silicon distribution is obtained at the growth interface.
Ryerson University Library and Archives
Title: Three-dimensional numerical simulation of crystal growth using TSM under g-jitter conditions
Description:
The goal of this thesis is to study the effect of residual gravity on crystal growth of Silicon Germanium GE0.
98 Si0.
02 using the Traveling Heater Method (THM).
This method has proven to be one of the most efficient techniques to grow high-quality crystals because it can be grown at relatively low temperatures compared to existing crystal growth techniques.
Yet, because of natural convection due to earth's gravity, imperfection in terms of silicon distribution along the growth interface occurs.
By growing crystals in a space environment, residual gravity represented by a static microgravity component and a sinusoidal component would decrease the intensity of the convective flow, which in return would lead to a more uniform silicon distribution.
However, g-jitter fluctuation has proven to have a noticeable effect on the silicon distribution.
Therefore, as an initial step to understand the behavior of crystal growth in space, each component of the g-jitter force will be studied thoroughly.
The momentum, mass and energy equations, representing the 3D TSM model, were solved using finite element means.
The preliminary results indicate that the complexity and the intensity of the silicon distribution along the growth interface are proportional to the convective flow, that partially controls the migration of silicon.
Therefore, the quality of the crystal growth is assessed based on the behavior of the flow along the solvent regime.
Based on the imposed static gravity in the range of 10-6 go to 10-3 go, the flow was determined to be in a diffusion mode with a velocity ranging from 10-6 cm/sec to 10-3 cm/sec.
As a matter of fact, the flow intensity was noted to be positively proportional to the dominant component of both the static and the amplitude of the imposed g-jitter and negatively proportional to the frequency of the sinusoidal g-jitter.
Consequently, realistic space growth conditions have proven to be an effective way of producing a homogeneous crystal since a flawless crystal silicon distribution is obtained at the growth interface.

Related Results

Characteristics of the Total Suspended Matter Concentration in the Hongze Lake during 1984–2019 Based on Landsat Data
Characteristics of the Total Suspended Matter Concentration in the Hongze Lake during 1984–2019 Based on Landsat Data
The Hongze Lake is the fourth largest freshwater lake in China and an important lake for the East Route of the South-to-North Water Diversion Project. The water quality of the lake...
Three-dimensional numerical simulation of crystal growth using TSM under g-jitter conditions
Three-dimensional numerical simulation of crystal growth using TSM under g-jitter conditions
The goal of this thesis is to study the effect of residual gravity on crystal growth of Silicon Germanium GE0.98 Si0.02 using the Traveling Heater Method (THM). This method has pro...
Two-dimensional function photonic crystal
Two-dimensional function photonic crystal
Photonic crystal is a kind of periodic optical nanostructure consisting of two or more materials with different dielectric constants, which has attracted great deal of attention be...
Jitter Error Correction for the HaiYang-3A Satellite Based on Multi-Source Attitude Fusion
Jitter Error Correction for the HaiYang-3A Satellite Based on Multi-Source Attitude Fusion
The periodic rotation of the Ocean Color and Temperature Scanner (OCTS) introduces jitter errors in the HaiYang-3A (HY-3A) satellite, leading to internal geometric distortion in op...
Jitter-Robust Phase Retrieval Wavefront Sensing Algorithms
Jitter-Robust Phase Retrieval Wavefront Sensing Algorithms
Phase retrieval wavefront sensing methods are now of importance for imaging quality maintenance of space telescopes. However, their accuracy is susceptible to line-of-sight jitter ...
Research on a low-jitter laser-triggered pseudo-spark switch
Research on a low-jitter laser-triggered pseudo-spark switch
Pseudo-spark switches have been successfully used in a variety of pulsed-power applications, including the European Large Hadron Collider, the Z-hoop fusion device, and the Dense P...
Estimación de datos diarios faltantes en la Temperatura Superficial del Mar, Laboratorios Costeros - IMARPE
Estimación de datos diarios faltantes en la Temperatura Superficial del Mar, Laboratorios Costeros - IMARPE
Los datos de la Temperatura Superficial del Mar (TSM) obtenidas in situ por los Laboratorios Costeros del Imarpe, representan uno de los registros históricos diarios más completos ...
Evidence of Language Contact: Source Prepositional Phrases in Taiwanese Southern Min
Evidence of Language Contact: Source Prepositional Phrases in Taiwanese Southern Min
<p align="center"><strong>Evidence of Language Contact: Data from source Prepositional Phrases in Taiwanese Southern Min </strong></p><p><strong>...

Back to Top