Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Morphological features of the photoplethysmographic signal: a new approach to characterize the microcirculatory response to photobiomodulation

View through CrossRef
Introduction and Objectives: Advanced analysis of the morphological features of the photoplethysmographic (PPG) waveform may provide greater understanding of mechanisms of action of photobiomodulation (PBM). Photobiomodulation is a non-ionizing, red to near-infrared irradiation shown to induce peripheral vasodilatation, promote wound healing, and reduce pain. Using laser Doppler flowmetry combined with thermal imaging we found previously in a clinical study that PBM stimulates microcirculatory blood flow and that baseline palm skin temperature determines, at least in part, why some individuals respond favorably to PBM while others do not. “Responders” (n = 12) had a skin temperature range of 33°C–37.5°C, while “non-responders” (n = 8) had “cold” or “hot” skin temperature (<33°C or >37.5°C respectively). The continuous PPG signals recorded from the index fingers of both hands in the original clinical study were subjected to advanced post-acquisitional analysis in the current study, aiming to identify morphological features that may improve the accuracy of discrimination between potential responders and non-responders to PBM.Methods: The PPG signals were detrended by subtracting the lower envelope from the raw signal. The Root Mean Square (RMS) and Entropy features were extracted as were two additional morphological features -- Smoothness and number of local extrema per PPG beat (#Extrema). These describe the signal jaggedness and were developed specifically for this study. The Wilcoxon test was used for paired comparisons. Correlations were determined by the Spearman correlation test (rs).Results: The PPG waveforms of responders to PBM had increased amplitude and decreased jaggedness (Baseline vs. 10’ post-irradiation: Entropy, 5.0 ± 1.3 vs. 3.9 ± 1.1, p = 0.012; #Extrema, 4.0 ± 1.1 vs. 3.0 ± 1.6, p = 0.009; RMS, 1.6 ± 0.9 vs. 2.3 ± 1.2, p = 0.004; Smoothness, 0.10 ± 0.05 vs. 0.19 ± 0.16, p = 0.016). In addition, unilateral irradiation resulted in a bilateral response, although the response of the contralateral, non-irradiated hand was shorter in duration and lower in magnitude. Although subjects with ‘cold,’ or ‘hot,’ baseline skin temperature appeared to have morphologically distinct PPG waveforms, representing vasoconstriction and vasodilatation, these were not affected by PBM irradiation.Conclusion: This pilot study indicates that post-acquisitional analysis of morphological features of the PPG waveform provides new measures for the exploration of microcirculation responsiveness to PBM.
Title: Morphological features of the photoplethysmographic signal: a new approach to characterize the microcirculatory response to photobiomodulation
Description:
Introduction and Objectives: Advanced analysis of the morphological features of the photoplethysmographic (PPG) waveform may provide greater understanding of mechanisms of action of photobiomodulation (PBM).
Photobiomodulation is a non-ionizing, red to near-infrared irradiation shown to induce peripheral vasodilatation, promote wound healing, and reduce pain.
Using laser Doppler flowmetry combined with thermal imaging we found previously in a clinical study that PBM stimulates microcirculatory blood flow and that baseline palm skin temperature determines, at least in part, why some individuals respond favorably to PBM while others do not.
“Responders” (n = 12) had a skin temperature range of 33°C–37.
5°C, while “non-responders” (n = 8) had “cold” or “hot” skin temperature (<33°C or >37.
5°C respectively).
The continuous PPG signals recorded from the index fingers of both hands in the original clinical study were subjected to advanced post-acquisitional analysis in the current study, aiming to identify morphological features that may improve the accuracy of discrimination between potential responders and non-responders to PBM.
Methods: The PPG signals were detrended by subtracting the lower envelope from the raw signal.
The Root Mean Square (RMS) and Entropy features were extracted as were two additional morphological features -- Smoothness and number of local extrema per PPG beat (#Extrema).
These describe the signal jaggedness and were developed specifically for this study.
The Wilcoxon test was used for paired comparisons.
Correlations were determined by the Spearman correlation test (rs).
Results: The PPG waveforms of responders to PBM had increased amplitude and decreased jaggedness (Baseline vs.
10’ post-irradiation: Entropy, 5.
0 ± 1.
3 vs.
3.
9 ± 1.
1, p = 0.
012; #Extrema, 4.
0 ± 1.
1 vs.
3.
0 ± 1.
6, p = 0.
009; RMS, 1.
6 ± 0.
9 vs.
2.
3 ± 1.
2, p = 0.
004; Smoothness, 0.
10 ± 0.
05 vs.
0.
19 ± 0.
16, p = 0.
016).
In addition, unilateral irradiation resulted in a bilateral response, although the response of the contralateral, non-irradiated hand was shorter in duration and lower in magnitude.
Although subjects with ‘cold,’ or ‘hot,’ baseline skin temperature appeared to have morphologically distinct PPG waveforms, representing vasoconstriction and vasodilatation, these were not affected by PBM irradiation.
Conclusion: This pilot study indicates that post-acquisitional analysis of morphological features of the PPG waveform provides new measures for the exploration of microcirculation responsiveness to PBM.

Related Results

Common Microcirculatory Framework for Monitoring Integrated Microcirculation
Common Microcirculatory Framework for Monitoring Integrated Microcirculation
Abstract Wide variation in magnitudes, units, and ranges of the microcirculatory variables brings hindrance in describing and evaluating the integrated microcirculatory fun...
Sublingual capillary de-recruitment with preserved recruitability in resuscitated patients with circulatory shock
Sublingual capillary de-recruitment with preserved recruitability in resuscitated patients with circulatory shock
Abstract Background Circulatory shock and multi-organ failure remain major contributors to mortality in critically ill patients, resulting in decoupling of macro- and micr...
Microcirculatory Response to Photobiomodulation—Why Some Respond and Others Do Not: A Randomized Controlled Study
Microcirculatory Response to Photobiomodulation—Why Some Respond and Others Do Not: A Randomized Controlled Study
Background and ObjectivesPhotobiomodulation (PBM), a non‐ionizing, non‐thermal irradiation, used clinically to accelerate wound healing and inhibit pain, was previously shown to in...
Immunomodulatory effects of photobiomodulation: a comprehensive review
Immunomodulatory effects of photobiomodulation: a comprehensive review
Abstract Photobiomodulation, also known as low-level light therapy (LLLT), has emerged as a promising non-invasive treatment modality with significant immunomodul...
Influence of Photobiomodulation Therapy on Regenerative Potential of Necrotic Mature Permanent Teeth in Dogs
Influence of Photobiomodulation Therapy on Regenerative Potential of Necrotic Mature Permanent Teeth in Dogs
Abstract Background: The conventional treatment methods of necrotic mature permanent teeth that remove immune mechanisms, increase the susceptibility of root fracture and p...
Microcirculatory assessment in daily clinical practice - not yet ready but not too far!
Microcirculatory assessment in daily clinical practice - not yet ready but not too far!
ABSTRACT Shock is characterized by an alteration in tissue perfusion that may lead to tissue hypoxia. Recent guidelines recommend aggressive and early resuscitation therapy, but mo...
On-Site Response Tracking for WISDOM System
On-Site Response Tracking for WISDOM System
AbstractThe WISDOM ground penetrating radar aboard the Rosalind Franklin rover is waiting for its intended launch in 2028 within the ExoMars mission. It will search for Water, Ice,...
Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Smart manufacturing has been developed since the introduction of Industry 4.0. It consists of resource sharing and networking, predictive engineering, and material and data analyti...

Back to Top