Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
High-Alloy Graphitic Irons
View through CrossRef
Abstract
This article discusses the melting and poring practices, heat treatment, and applications of different types of high-alloy graphitic iron, namely, high-silicon gray irons, high-silicon ductile irons, nickel-alloyed austenitic irons, austenitic gray irons, austenitic ductile irons, and aluminum-alloyed irons.
Title: High-Alloy Graphitic Irons
Description:
Abstract
This article discusses the melting and poring practices, heat treatment, and applications of different types of high-alloy graphitic iron, namely, high-silicon gray irons, high-silicon ductile irons, nickel-alloyed austenitic irons, austenitic gray irons, austenitic ductile irons, and aluminum-alloyed irons.
Related Results
Characterization of Matrices and Graphite Forms of Cast Irons by Electromagnetic Nondestructive Evaluation
Characterization of Matrices and Graphite Forms of Cast Irons by Electromagnetic Nondestructive Evaluation
Mechanical properties of cast irons are mainly determined by two factors of microstructures, graphite morphology and type of matrices. Both graphite morphology and matrices affect ...
Characterization of Matrices and Graphite Forms of Cast Irons by Electromagnetic Nondestructive Evaluation
Characterization of Matrices and Graphite Forms of Cast Irons by Electromagnetic Nondestructive Evaluation
Mechanical properties of cast irons are mainly determined by two factors of microstructures, graphite forms and matrices. Both graphite forms and matrices affect electromagnetic pr...
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
Co alloy modular necks have been introduced in orthopaedics to address mechanical failure of the neck-stem junction (NSJ) observed in Ti alloy dual-modular hip stem. However, follo...
Effect of Niobium on the Microstructure and Mechanical Properties of Alloyed Ductile Irons and Austempered Ductile Irons
Effect of Niobium on the Microstructure and Mechanical Properties of Alloyed Ductile Irons and Austempered Ductile Irons
In this research, different ductile irons and austempered ductile irons were successfully developed using several alloying contents of nickel, copper and microalloying with niobium...
Scalable Synthesis of Stable Electrocatalyst for Oxygen Reduction Reaction
Scalable Synthesis of Stable Electrocatalyst for Oxygen Reduction Reaction
Carbon-based materials have been widely recognized as support material of choice for the oxygen reduction reaction due to their intriguing properties, such as high electrical condu...
Recent Advances in Synthesis of Graphite from Agricultural Bio-Waste Material: A Review
Recent Advances in Synthesis of Graphite from Agricultural Bio-Waste Material: A Review
Graphitic carbon is a valuable material that can be utilized in many fields, such as electronics, energy storage and wastewater filtration. Due to the high demand for commercial gr...
Ceramometal Bond Strength Analysis using New and Recast Nonprecious Alloys with Three Different Ceramics
Ceramometal Bond Strength Analysis using New and Recast Nonprecious Alloys with Three Different Ceramics
ABSTRACT
Objectives
This study is undertaken to evaluate the dependence of bond strength of 100% fresh nonprecious alloy and the combination of 50% recast (used) alloy and 50% fre...
Alloy Selection for Reheater Tubes in Flue Gas Desulfurization Systems
Alloy Selection for Reheater Tubes in Flue Gas Desulfurization Systems
Abstract
Service performance of reheater systems has been less than desirable in several flue gas desulfurization (FGD) units. The selection of proper alloys for opt...