Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
An Experimental Investigation of Shrouded and Cantilevered Compressor Stators at Varying Clearance Sizes
View through CrossRef
This paper presents measurements conducted at a 4-stage low speed axial research compressor with cantilevered and shrouded stator vanes. The aim of the work is to compare these two design philosophies under rear stage conditions. To achieve blockage levels typical for rear compressor stages, the hub clearance of the first and second vane row were kept constant at 4% of channel height. The investigation were done within the third and fourth stage of the compressor. Tests were conducted at 4 different hub clearances over the third and fourth stator and subsequently with 3 different mass flow rates through the cavity of the shrouded third stator. Overall performance data and flow field traverses upstream and downstream of stator 3 and rotor 4 will be discussed.
Title: An Experimental Investigation of Shrouded and Cantilevered Compressor Stators at Varying Clearance Sizes
Description:
This paper presents measurements conducted at a 4-stage low speed axial research compressor with cantilevered and shrouded stator vanes.
The aim of the work is to compare these two design philosophies under rear stage conditions.
To achieve blockage levels typical for rear compressor stages, the hub clearance of the first and second vane row were kept constant at 4% of channel height.
The investigation were done within the third and fourth stage of the compressor.
Tests were conducted at 4 different hub clearances over the third and fourth stator and subsequently with 3 different mass flow rates through the cavity of the shrouded third stator.
Overall performance data and flow field traverses upstream and downstream of stator 3 and rotor 4 will be discussed.
Related Results
Different Effects of Cantilevered and Shrouded Stators on Axial Compressor Performance
Different Effects of Cantilevered and Shrouded Stators on Axial Compressor Performance
Numerical simulations with the steady 3D RANS were performed on the rear stage of a modern high pressure compressor. The labyrinth seal cavity model of the shrouded stator was simp...
Efficiency Variation on a 4-Stage Low Speed Research Compressor With a Redesigned Cantilevered Stator
Efficiency Variation on a 4-Stage Low Speed Research Compressor With a Redesigned Cantilevered Stator
Numerical simulations with the steady 3D RANS were performed on a 4-stage low speed research compressor (LSRC) with two typical configurations (a shrouded and a redesigned cantilev...
PERANAN AGEN DALAM PENGURUSAN CLEARANCE IN DAN CLEARANCE OUT DI KSOP KELAS 3 SAMPIT
PERANAN AGEN DALAM PENGURUSAN CLEARANCE IN DAN CLEARANCE OUT DI KSOP KELAS 3 SAMPIT
Abstrak
Clearance sebagai pengurusan berbagai macam dokumen yang diperlukan bagi kapal, Sangatlah penting bagi keselamatan kapal, barang yang diangkut, punumpang dan awaknya, dala...
Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors
Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors
Rotating stall is a primary limit to compressor performance, and the reasonable estimation of stall-onset point is very useful in compressor design. Extensive investigations have b...
Current-pumping performance of axial-symmetric superconducting dynamo designs
Current-pumping performance of axial-symmetric superconducting dynamo designs
<p>In this project, the current pumping performances of three high temperature superconducting (HTS) dynamos (mechanically-rotating flux pumps) were investigated. These flux ...
Root Cause Analysis of the Catastrophic Failure of a Propylene Recycle Compressor
Root Cause Analysis of the Catastrophic Failure of a Propylene Recycle Compressor
Abstract
A 2-section, 6-stage propylene recycle compressor experienced a catastrophic failure that resulted in extensive damage to its internals. The compressor was ...
Compressor Piping Design Effect on Vibration Data
Compressor Piping Design Effect on Vibration Data
One of the systems for oil and gas production supports is the nitrogen compression system. Problem found that condition of the compressor has high vibration with the maximum overal...
Effect of Axial Clearance on the Efficiency of a Shrouded Centrifugal Pump
Effect of Axial Clearance on the Efficiency of a Shrouded Centrifugal Pump
Clearance always exists between the rotating impeller shrouds and the stationary casing covers in shrouded centrifugal pumps, which affects the pump internal flow and performance. ...