Numerical analysis of unsteady flow under high‐head operating conditions in Francis turbine

PurposeThe purpose of this paper is to describe how the hydraulic performance and pressure fluctuations in the entire flow passage of a Francis turbine were predicted numerically for the highest head. The calculations are used to partition the turbine operating regions and to clarify the unsteady flow behavior in the entire flow passage including the blade channel vortex in the runner and vortex rope in the draft tube.Design/methodology/approachThree‐dimensional unsteady numerical simulations were performed for a number of operating conditions at the highest head. The unsteady Reynolds‐averaged Navier‐Stokes equations with the k‐ω based SST turbulence model were solved to model the unsteady flow within the entire flow passage of a Francis turbine.FindingsThe predicted pressure fluctuations in the draft tube agree well with the experimental results at low heads. However the peak‐to‐peak amplitudes in the spiral case are not as well predicted so the calculation domain and the inlet boundary conditions need to be improved. The unsteady simulation results are better than the steady‐state results. At the most unstable operating condition of case a0.5h1.26, the pulse in the flow passage is due to the rotor‐stator interference between the runner and the guide vanes, the blade channel vortex in the runner blade passage and the vortex rope in the draft tube.Originality/valueThis study investigates the characteristics of the dominant unsteady flow frequencies in different parts of the turbine for various guide vane openings at the highest head. The unsteady flow patterns in the turbine, including the blade channel vortex in the runner and the helical vortex rope in the draft tube, are classified numerically, and the turbine operating regions are partitioned to identify safe operating regions.