Research of Turbine Oil Varnish in Generator Unit

Abstract In recent years, due to the fact that thermal power generating units have been deeply involved in the peak shaving work of the power grid, the frequent start and stop operations of the units and rapid load-carrying operations have made the operating conditions of the units very bad. In large-scale thermal power generation units, shutdown accidents caused by varnish failures are becoming more common. Take the serious varnish failure of Unit 3 in a domestic power plant as a case for analysis. The steam turbine oil after the varnish is formed is fully analyzed and tested and the metal ion content test is carried out. The changes in the physical indicators of the steam turbine oil during the formation of the varnish are studied to determine the influence of the steam turbine oil on the physical indicators of the steam turbine oil during the formation of the steam turbine oil. The operation and maintenance personnel can detect the varnish in advance through the daily sampling and analysis of the steam turbine oil, and timely take treatment measures to remove the varnish components in the oil to ensure the safe and stable operation of the unit. This article summarizes the reason for the formation of varnish and the detection method of varnish. It is of great significance to effectively discover and control the production of varnish during the operation of the generator set, to study the formation mechanism of varnish and to find an effective method to remove varnish. This article also introduces the commonly used paint film treatment methods for the convenience of electric power technicians.