Javascript must be enabled to continue!
Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
View through CrossRef
Abstract
A testing protocol was developed to measure accumulation of vertical plastic deformation in fouled railway ballast under cyclic traffic loading. Large-scale cyclic triaxial (LSCT) test equipment was constructed to test fouled ballast under various stress conditions. A method of introducing fouling material and moisture to ballast specimens was critical to the resulting deformational behavior. Specimens for LSCT testing should be prepared by mixing ballast with relatively dry fouling material (moisture <5 % for granular fouling and <15 % for clay-based fouling) prior to compaction to prevent a heterogeneous distribution of fouling within the specimen. A full-scale track model experiment (FSTME) was built to determine a representative state of stress (RSS) for railway ballast for use in the LSCT testing. The RSS allows for testing of ballast under consistent stresses to compare the effect of material characteristics of fouling such as fouling content and moisture content. A RSS of 90 kPa (confining) and 300 kPa (deviator) for a train axle load of 264 kN was suggested based on the FSTME results. Measured deformation of fouled ballast using the proposed testing protocol was compared with a published vertical deformation of railway track in a track test section. Results of this study indicate that the proposed testing protocol can simulate the vertical plastic deformation of railway ballast at a specified stress level.
Title: Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
Description:
Abstract
A testing protocol was developed to measure accumulation of vertical plastic deformation in fouled railway ballast under cyclic traffic loading.
Large-scale cyclic triaxial (LSCT) test equipment was constructed to test fouled ballast under various stress conditions.
A method of introducing fouling material and moisture to ballast specimens was critical to the resulting deformational behavior.
Specimens for LSCT testing should be prepared by mixing ballast with relatively dry fouling material (moisture <5 % for granular fouling and <15 % for clay-based fouling) prior to compaction to prevent a heterogeneous distribution of fouling within the specimen.
A full-scale track model experiment (FSTME) was built to determine a representative state of stress (RSS) for railway ballast for use in the LSCT testing.
The RSS allows for testing of ballast under consistent stresses to compare the effect of material characteristics of fouling such as fouling content and moisture content.
A RSS of 90 kPa (confining) and 300 kPa (deviator) for a train axle load of 264 kN was suggested based on the FSTME results.
Measured deformation of fouled ballast using the proposed testing protocol was compared with a published vertical deformation of railway track in a track test section.
Results of this study indicate that the proposed testing protocol can simulate the vertical plastic deformation of railway ballast at a specified stress level.
Related Results
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
This study evaluates the mechanical behavior of railway ballast under severe transient loading, using a laboratory drop weight impact test to simulate the effects of high-magnitude...
Deformational behavior of fouled railway ballast
Deformational behavior of fouled railway ballast
Plastic strain of railway ballast subjected to various fouling conditions was determined under simulated traffic loading through testing with large-scale cyclic triaxial equipment....
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
The railway industry is seeking high-performance and sustainable solutions for sub-ballast materials, particularly in light of increasing cargo transport demands and climate events...
ANALISIS PERTIMBANGAN MAHKAMAH AGUNG DALAM MENGABULKAN KASASI TERDAKWA (STUDI PUTUSAN NOMOR 2959/K/PID.SUS/2022)
ANALISIS PERTIMBANGAN MAHKAMAH AGUNG DALAM MENGABULKAN KASASI TERDAKWA (STUDI PUTUSAN NOMOR 2959/K/PID.SUS/2022)
<p><em><span class="markedContent"><span style="left: calc(var(--scale-factor)*195.53px); top: calc(var(--scale-factor)*496.87px); font-size: calc(var(--scale-...
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
Ballast is a commonly used solution to ensure the stability and balance of ships during voyages. The volume of ballast water that is circulated by ships between different seas is e...
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Bio-invasion caused due to ballast water discharge is one of many problems in marine pollution. Countries such as Canada, Brazil, USA and Australia recognized the problems associat...
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Global coastal aquatic ecosystems are negatively impacted by the introduction of harmful aquatic species through the discharge of ships’ ballast water. To reduce discharges of harm...
KEDUDUKAN AHLI BAHASA DALAM PEMBUKTIAN PERKARA PENCEMARAN NAMA BAIK (STUDI PUTUSAN NOMOR: 47/PID.SUS/2019/PN. MGT)
KEDUDUKAN AHLI BAHASA DALAM PEMBUKTIAN PERKARA PENCEMARAN NAMA BAIK (STUDI PUTUSAN NOMOR: 47/PID.SUS/2019/PN. MGT)
<em><span id="page3R_mcid52" class="markedContent"><span style="left: calc(var(--scale-factor)*125.30px); top: calc(var(--scale-factor)*539.11px); font-size: calc(va...

