Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Deformational behavior of fouled railway ballast

View through CrossRef
Plastic strain of railway ballast subjected to various fouling conditions was determined under simulated traffic loading through testing with large-scale cyclic triaxial equipment. Mechanisms by which fouling material affects the plastic strain of railway ballast were investigated. Fouling content (% by weight of particles <12 mm) increased the plastic strain of ballast by contaminating the contact points of ballast particles. Increasing moisture (>3%) resulted in larger accumulation of plastic strain in fouled ballast under traffic loading. Soil-suction tests showed that plastic strain of fouled ballast with suction >2000 kPa is similar to that of clean ballast, regardless of fouling and moisture content. For noncohesive fouling material (mineral and coal fouling), plastic strain is affected by fouling and moisture; therefore, a noncohesive fouling index (NFI) is proposed. In cohesive (clay) fouling, plastic strain is controlled by moisture and fouling content, as well as compositional characteristics of the cohesive fouling material, primarily represented by Atterberg limits and % mass <0.075 mm. A cohesive fouling index (CFI) is proposed to characterize the deformation of cohesive fouled ballast.
Title: Deformational behavior of fouled railway ballast
Description:
Plastic strain of railway ballast subjected to various fouling conditions was determined under simulated traffic loading through testing with large-scale cyclic triaxial equipment.
Mechanisms by which fouling material affects the plastic strain of railway ballast were investigated.
Fouling content (% by weight of particles <12 mm) increased the plastic strain of ballast by contaminating the contact points of ballast particles.
Increasing moisture (>3%) resulted in larger accumulation of plastic strain in fouled ballast under traffic loading.
Soil-suction tests showed that plastic strain of fouled ballast with suction >2000 kPa is similar to that of clean ballast, regardless of fouling and moisture content.
For noncohesive fouling material (mineral and coal fouling), plastic strain is affected by fouling and moisture; therefore, a noncohesive fouling index (NFI) is proposed.
In cohesive (clay) fouling, plastic strain is controlled by moisture and fouling content, as well as compositional characteristics of the cohesive fouling material, primarily represented by Atterberg limits and % mass <0.
075 mm.
A cohesive fouling index (CFI) is proposed to characterize the deformation of cohesive fouled ballast.

Related Results

INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
This study evaluates the mechanical behavior of railway ballast under severe transient loading, using a laboratory drop weight impact test to simulate the effects of high-magnitude...
Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
Abstract A testing protocol was developed to measure accumulation of vertical plastic deformation in fouled railway ballast under cyclic traffic loading. Large-scale...
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
The railway industry is seeking high-performance and sustainable solutions for sub-ballast materials, particularly in light of increasing cargo transport demands and climate events...
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
Ballast is a commonly used solution to ensure the stability and balance of ships during voyages. The volume of ballast water that is circulated by ships between different seas is e...
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Bio-invasion caused due to ballast water discharge is one of many problems in marine pollution. Countries such as Canada, Brazil, USA and Australia recognized the problems associat...
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Global coastal aquatic ecosystems are negatively impacted by the introduction of harmful aquatic species through the discharge of ships’ ballast water. To reduce discharges of harm...
Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study
Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study
In ballasted concrete tie track, the tie-ballast interface can deteriorate resulting in concrete tie bottom abrasion, ballast pulverization and/or voids in tie-ballast interfaces. ...
Forecasting Track Geometry Degradation Using GPR Based Ballast Condition
Forecasting Track Geometry Degradation Using GPR Based Ballast Condition
Abstract The ability to predict track geometry degradation is of critical importance in planning of track maintenance operations. This paper presents results of an F...

Back to Top