Javascript must be enabled to continue!
Formation of Orthogonal Components of Input Currents in Microprocessor Protections of Electrical Equipment
View through CrossRef
The methods used in the microprocessor protection of electrical equipment for forming orthogonal components of input currents ensure their reliable isolation after changing the mode followed by one or more periods of the fundamental frequency. This is due to the inertia of the functional elements, in particular, digital frequency filters, as well as the saturation of the steel magnetic cores of current transformers. To increase the speed of the selection of orthogonal components of the input currents, it is proposed to form them as equivalent ones in terms of the cosine and sine components obtained using digital Fourier filters by multiplying by the resulting coefficient. The method that has been developed for determining the specified coefficient provides compensation for the delay caused by the inertia of digital filters, as well as the saturation of the steel of magnetic cores of current transformers. The proposed method of forming orthogonal components is highly effective in the modes of strong saturation of the magnetic core with a complex input action in the presence of an aperiodic component with a large damping time constant. The evaluation of the efficiency of the proposed method was performed using a complex digital model implemented in the dynamic modeling environment MatLab-Simulink. As a result of the performed studies, it was found that in the absence of saturation of the magnetic core of current transformers, as well as in the presence of a small and medium degree of saturation, the proposed method for forming equivalent orthogonal components of input currents has dynamic properties close to the ones of those that had been previously proposed. With a strong saturation of the magnetic core of current transformers, the speed of obtaining reliable values of these components is increased by 1.5–2 times.
Belarusian National Technical University
Title: Formation of Orthogonal Components of Input Currents in Microprocessor Protections of Electrical Equipment
Description:
The methods used in the microprocessor protection of electrical equipment for forming orthogonal components of input currents ensure their reliable isolation after changing the mode followed by one or more periods of the fundamental frequency.
This is due to the inertia of the functional elements, in particular, digital frequency filters, as well as the saturation of the steel magnetic cores of current transformers.
To increase the speed of the selection of orthogonal components of the input currents, it is proposed to form them as equivalent ones in terms of the cosine and sine components obtained using digital Fourier filters by multiplying by the resulting coefficient.
The method that has been developed for determining the specified coefficient provides compensation for the delay caused by the inertia of digital filters, as well as the saturation of the steel of magnetic cores of current transformers.
The proposed method of forming orthogonal components is highly effective in the modes of strong saturation of the magnetic core with a complex input action in the presence of an aperiodic component with a large damping time constant.
The evaluation of the efficiency of the proposed method was performed using a complex digital model implemented in the dynamic modeling environment MatLab-Simulink.
As a result of the performed studies, it was found that in the absence of saturation of the magnetic core of current transformers, as well as in the presence of a small and medium degree of saturation, the proposed method for forming equivalent orthogonal components of input currents has dynamic properties close to the ones of those that had been previously proposed.
With a strong saturation of the magnetic core of current transformers, the speed of obtaining reliable values of these components is increased by 1.
5–2 times.
Related Results
Formation of Orthogonal Components of Input Signals in Digital Measuring Protection Elements with Correction of Dynamic Errors
Formation of Orthogonal Components of Input Signals in Digital Measuring Protection Elements with Correction of Dynamic Errors
Digital measuring elements in microprocessor protections of electrical installations are implemented mainly with the use of orthogonal components of input signals. To form orthogon...
EPD Electronic Pathogen Detection v1
EPD Electronic Pathogen Detection v1
Electronic pathogen detection (EPD) is a non - invasive, rapid, affordable, point- of- care test, for Covid 19 resulting from infection with SARS-CoV-2 virus. EPD scanning techno...
Improvement of Algorithm for Formation of Orthogonal Components of Input Quantities in Microprocessor Protection
Improvement of Algorithm for Formation of Orthogonal Components of Input Quantities in Microprocessor Protection
The use of orthogonal components (OC) underlies the construction of measuring elements of modern protection and automation devices. In most microprocessor-based protections, the ...
Dependability factors of microprocessor protection software
Dependability factors of microprocessor protection software
Aim. An analysis of the distinctive features of the functional dependability of software that are common to critical real-time applications in respect to microprocessor protections...
Historia, stan i potrzeby badań nad uzbrojeniem z ziem polskich okresów rzymskiego i wędrówek ludów. Spojrzenie subiektywne (pomimo dobrych chęci)
Historia, stan i potrzeby badań nad uzbrojeniem z ziem polskich okresów rzymskiego i wędrówek ludów. Spojrzenie subiektywne (pomimo dobrych chęci)
History, State of and Necessity for Research on the Roman and Migration Period Military Equipment from Poland. Subjective Approach (Despite Good Intentions)Significant studies on m...
Improving of Functioning Stability of Current Measuring Elements in Microprocessor Protections
Improving of Functioning Stability of Current Measuring Elements in Microprocessor Protections
In the measuring elements of the current of microprocessor protection, the controlled values are usually the effective values of the fundamental harmonic of the currents. They are ...
Resource-saving protections of power transformers against internal faults
Resource-saving protections of power transformers against internal faults
The paper presents the principle of operation of the developed gas protection and oil level control, the purpose of which is to protect power transformers from short circuits. The ...
Analysis of industry based microprocessor learning module design
Analysis of industry based microprocessor learning module design
The Microprocessor course is a mandatory course that must be taken by every PVTE undergraduate student, in understanding the material contained in this course, the researcher assum...

