Javascript must be enabled to continue!
Improvement of Algorithm for Formation of Orthogonal Components of Input Quantities in Microprocessor Protection
View through CrossRef
The use of orthogonal components (OC) underlies the construction of measuring elements of modern protection and automation devices. In most microprocessor-based protections, the orthogonal component of the input signal is extracted using a discrete Fourier transform (DFT). The DFT disadvantages are its low speed, which is more than one period of the fundamental frequency, as well as the sensitivity to the free aperiodic component, which creates significant conversion errors depending on the time constant of its decay. Such a settling time of the true output signal is often unacceptable for the design of high-speed measuring devices. The paper proposes to form the OC of the equivalent signal according to the values of the cosine and sine OC of the fundamental harmonic, formed using the DFT by multiplying them by the resulting correction factor. The developed algorithm for the formation of orthogonal components of input signals in microprocessor protections is characterized by high speed in transient modes and it has wide functionality. So, the proposed digital device for forming the orthogonal components of an equivalent signal, in comparison with digital filter based on the DFT, has an increased operating speed both in the mode of occurrence of a short circuit and during the decay of the monitored signal, while maintaining the same characteristics as in the DFT in other modes. A block diagram of the proposed digital device for forming the OC of an equivalent signal has been developed, all blocks of which can be implemented on a microelectronic and microprocessor element base. A digital model of the specified device has been developed in the dynamic modeling system MatLab-Simulink in accordance with the structural diagram. As a result of the calculations, a significant (up to two times) increase in the performance of the proposed digital device for forming the OC in transient modes has been established in comparison with the shapers based on the DFT.
Belarusian National Technical University
Title: Improvement of Algorithm for Formation of Orthogonal Components of Input Quantities in Microprocessor Protection
Description:
The use of orthogonal components (OC) underlies the construction of measuring elements of modern protection and automation devices.
In most microprocessor-based protections, the orthogonal component of the input signal is extracted using a discrete Fourier transform (DFT).
The DFT disadvantages are its low speed, which is more than one period of the fundamental frequency, as well as the sensitivity to the free aperiodic component, which creates significant conversion errors depending on the time constant of its decay.
Such a settling time of the true output signal is often unacceptable for the design of high-speed measuring devices.
The paper proposes to form the OC of the equivalent signal according to the values of the cosine and sine OC of the fundamental harmonic, formed using the DFT by multiplying them by the resulting correction factor.
The developed algorithm for the formation of orthogonal components of input signals in microprocessor protections is characterized by high speed in transient modes and it has wide functionality.
So, the proposed digital device for forming the orthogonal components of an equivalent signal, in comparison with digital filter based on the DFT, has an increased operating speed both in the mode of occurrence of a short circuit and during the decay of the monitored signal, while maintaining the same characteristics as in the DFT in other modes.
A block diagram of the proposed digital device for forming the OC of an equivalent signal has been developed, all blocks of which can be implemented on a microelectronic and microprocessor element base.
A digital model of the specified device has been developed in the dynamic modeling system MatLab-Simulink in accordance with the structural diagram.
As a result of the calculations, a significant (up to two times) increase in the performance of the proposed digital device for forming the OC in transient modes has been established in comparison with the shapers based on the DFT.
Related Results
Formation of Orthogonal Components of Input Signals in Digital Measuring Protection Elements with Correction of Dynamic Errors
Formation of Orthogonal Components of Input Signals in Digital Measuring Protection Elements with Correction of Dynamic Errors
Digital measuring elements in microprocessor protections of electrical installations are implemented mainly with the use of orthogonal components of input signals. To form orthogon...
The Operational and Protection Quantities for External Radiation Exposure: A review
The Operational and Protection Quantities for External Radiation Exposure: A review
The concepts of protection and operational quantities are fundamental in radiation protection, essential for assessing and controlling exposure to ionizing radiation. Protection qu...
POSSIBILITY OF BUILDING MICROPROCESSOR RELAY PROTECTION DEVICES ON OPEN ARCHITECTURE
POSSIBILITY OF BUILDING MICROPROCESSOR RELAY PROTECTION DEVICES ON OPEN ARCHITECTURE
"The article analyzes the structure of relay protection devices of various designs. Based on the Unified Electric Power System of the Republic of Kazakhstan prediction on the elect...
Formation of Orthogonal Components of Input Currents in Microprocessor Protections of Electrical Equipment
Formation of Orthogonal Components of Input Currents in Microprocessor Protections of Electrical Equipment
The methods used in the microprocessor protection of electrical equipment for forming orthogonal components of input currents ensure their reliable isolation after changing the mod...
Dependability factors of microprocessor protection software
Dependability factors of microprocessor protection software
Aim. An analysis of the distinctive features of the functional dependability of software that are common to critical real-time applications in respect to microprocessor protections...
Dynamic Properties of Remote Sensing Algorithm in Digital Resistance Elements
Dynamic Properties of Remote Sensing Algorithm in Digital Resistance Elements
In microprocessor-based distance protection of lines, digital resistance elements are used as measuring instruments for determining the components of the input resistance vector an...
Analysis of industry based microprocessor learning module design
Analysis of industry based microprocessor learning module design
The Microprocessor course is a mandatory course that must be taken by every PVTE undergraduate student, in understanding the material contained in this course, the researcher assum...
Separable roles for Microprocessor and its cofactors ERH and SAFB1/2 during microRNA cluster assistance
Separable roles for Microprocessor and its cofactors ERH and SAFB1/2 during microRNA cluster assistance
Abstract
While most conserved microRNA (miRNA) transcripts harbor a suite of features that mediate their efficient biogenesis into small RNAs, some loci bear subopt...

