Javascript must be enabled to continue!
Dimensional Stability and Accuracy of Silicone Impression Materials After Ozone Water Disinfection: An In Vitro Study
View through CrossRef
Objectives: This study evaluated the effect of ozone water disinfection on dimensional stability and accuracy of silicone impression materials.
Materials and Methods: According to ISO-4823, a stainless-steel die was fabricated for this in vitro study. Three horizontal parallel lines, namely x, y, and z (25, 50, and 75µm in width and 25mm in length) running perpendicular to two vertical lines, namely D1 and D2 (0.075±0.008mm wide), were created on the superior surface of the die. Group A served as the control group with no disinfection. Disinfection was performed with 2% glutaraldehyde in group B, 5.25% sodium hypochlorite in group C, and ozone water in group D for 10 minutes. Totally, 60 samples were fabricated. The silicone impression samples were allowed to polymerize in a thermostatically controlled water bath at 35±1ºC for 10 minutes. The dimensional stability and accuracy of the silicone impression samples were evaluated by using a video measuring microscope and an optical microscope. Data were analyzed by two-way ANOVA followed by post-hoc analysis with the Scheffe test (alpha=0.05).
Results: The highest dimensional stability (25.01mm) and accuracy (25.02µm) were seen in addition silicone putty and light body impression with ozone water disinfection, and the lowest parameters were seen in condensation silicon putty and light body disinfected with 2% glutaraldehyde (24.87mm and 24.88 µm, respectively); this difference was statistically significant (P<0.001).
Conclusion: Ozone water disinfection caused minimal changes in dimensional stability and accuracy when compared to 2% glutaraldehyde and 5.25% sodium hypochlorite disinfection.
Title: Dimensional Stability and Accuracy of Silicone Impression Materials After Ozone Water Disinfection: An In Vitro Study
Description:
Objectives: This study evaluated the effect of ozone water disinfection on dimensional stability and accuracy of silicone impression materials.
Materials and Methods: According to ISO-4823, a stainless-steel die was fabricated for this in vitro study.
Three horizontal parallel lines, namely x, y, and z (25, 50, and 75µm in width and 25mm in length) running perpendicular to two vertical lines, namely D1 and D2 (0.
075±0.
008mm wide), were created on the superior surface of the die.
Group A served as the control group with no disinfection.
Disinfection was performed with 2% glutaraldehyde in group B, 5.
25% sodium hypochlorite in group C, and ozone water in group D for 10 minutes.
Totally, 60 samples were fabricated.
The silicone impression samples were allowed to polymerize in a thermostatically controlled water bath at 35±1ºC for 10 minutes.
The dimensional stability and accuracy of the silicone impression samples were evaluated by using a video measuring microscope and an optical microscope.
Data were analyzed by two-way ANOVA followed by post-hoc analysis with the Scheffe test (alpha=0.
05).
Results: The highest dimensional stability (25.
01mm) and accuracy (25.
02µm) were seen in addition silicone putty and light body impression with ozone water disinfection, and the lowest parameters were seen in condensation silicon putty and light body disinfected with 2% glutaraldehyde (24.
87mm and 24.
88 µm, respectively); this difference was statistically significant (P<0.
001).
Conclusion: Ozone water disinfection caused minimal changes in dimensional stability and accuracy when compared to 2% glutaraldehyde and 5.
25% sodium hypochlorite disinfection.
Related Results
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
BACKGROUND
Access to potable drinking water and sufficient sanitation continues to be an urgent global concern, particularly in developing regions where con...
Disinfection Effect on Surface Properties of Prosthodontic Polymer Impression Materials: An In Vitro Study
Disinfection Effect on Surface Properties of Prosthodontic Polymer Impression Materials: An In Vitro Study
This study was conducted to evaluate the surface roughness, shore hardness, and dimensional accuracy of commercially obtainable Prosthodontic polymer impression material in terms o...
Investigating the relationship between ozone and water-ice in the martian atmosphere
Investigating the relationship between ozone and water-ice in the martian atmosphere
<p>This project maps ozone and ice-water clouds detected in the martian atmosphere to assess the atmospheric chemistry between ozone, water-ice and hydroxyl radicals....
Atmospheric ozone at South Pole, Antarctica, in 1986
Atmospheric ozone at South Pole, Antarctica, in 1986
Vertical‐profile ozone distributions and variations, as well as the annual course of total ozone, are described for South Pole, Antarctica, from observations made throughout 1986 w...
Comparative Evaluation of Disinfection on Elastomeric Impression Material using 2% Gluteraldehyde, Ultra Violet Radiation and Gaseous Ozone using Customised Disinfection Unit - An In-Vitro Study
Comparative Evaluation of Disinfection on Elastomeric Impression Material using 2% Gluteraldehyde, Ultra Violet Radiation and Gaseous Ozone using Customised Disinfection Unit - An In-Vitro Study
Dental impressions is the preliminary step for any procedure and acts as a microbial source leading to contamination to the operator and lab technician. Hence, the disinfection of ...
Physiological response of Garlic (Allium sativum) to elevated tropospheric ozone in high altitude region of Western Ghats, Tamil Nadu, India
Physiological response of Garlic (Allium sativum) to elevated tropospheric ozone in high altitude region of Western Ghats, Tamil Nadu, India
Abstract
A pot culture study was conducted at Horticultural Research Station, Ooty, to assess the effect of ground-level ozone on physiology in garlic plants and find out s...
Enhanced climate response to ozone depletion from ozone-circulation coupling
Enhanced climate response to ozone depletion from ozone-circulation coupling
The effect of stratospheric ozone depletion is simulated in GFDL AM4
model with three ozone schemes: prescribing monthly zonal mean ozone
concentration, full interactive stratosphe...
Research on the stratospheric ozone depletion in the polar spring
Research on the stratospheric ozone depletion in the polar spring
In recent years, the severe stratospheric ozone depletion events (ODEs) were reported in the polar spring. We retrieved the critical indicator ozone vertical column densities (VCDs...

