Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Disinfection Effect on Surface Properties of Prosthodontic Polymer Impression Materials: An In Vitro Study

View through CrossRef
This study was conducted to evaluate the surface roughness, shore hardness, and dimensional accuracy of commercially obtainable Prosthodontic polymer impression material in terms of imbibition after immersion in two different media and without disinfection. This in vitro study was designed to investigate the surface properties of polymer impression materials before and after disinfection by immersion. Materials with different consistencies (alginate (irreversible hydrocolloid), condensation silicone (putty), and addition silicone (putty) impression materials) were investigated. The tested null hypothesis was the fact that there would be no significant differences in surface properties among these Prosthodontic polymer impression materials. Two disinfecting agents, Zeta 7 solution and ASEPTOPRINT, were used to assess the surface roughness, hardness, and dimensional accuracy of the impression material. The weights of the discs of the Prosthodontic polymer impression material samples were measured before and immediately after immersion to determine if there was a change in the properties of the material. study was conducted at the Advanced Medical Polymer Group in the Libyan Polymer Research Center to evaluate the surface properties of prosthodontic polymer impression materials. Data analysis included mean, standard deviation, and One-way ANOVA calculations. The study showed that the surface properties of dental polymer impression materials were affected by disinfection methods. Specifically, for alginate material, there were significant differences in surface properties between the control group (before immersion) and after immersion in zeta 7 solution and ASEPTOPRINT spray. However, for addition silicone (putty), there was a significant difference in surface properties between the control group and after immersion in zeta 7 solution, while immersion in spray did not show a significant difference. For condensation silicone (putty) material, there were significant differences in surface properties between the control group and after immersion in both zeta 7 solution and ASEPTOPRINT spray. The study concluded that disinfection methods can affect the surface properties of dental polymer impression materials.
Faculty of Dentistry Khalij-Libya Dental College
Title: Disinfection Effect on Surface Properties of Prosthodontic Polymer Impression Materials: An In Vitro Study
Description:
This study was conducted to evaluate the surface roughness, shore hardness, and dimensional accuracy of commercially obtainable Prosthodontic polymer impression material in terms of imbibition after immersion in two different media and without disinfection.
This in vitro study was designed to investigate the surface properties of polymer impression materials before and after disinfection by immersion.
Materials with different consistencies (alginate (irreversible hydrocolloid), condensation silicone (putty), and addition silicone (putty) impression materials) were investigated.
The tested null hypothesis was the fact that there would be no significant differences in surface properties among these Prosthodontic polymer impression materials.
Two disinfecting agents, Zeta 7 solution and ASEPTOPRINT, were used to assess the surface roughness, hardness, and dimensional accuracy of the impression material.
The weights of the discs of the Prosthodontic polymer impression material samples were measured before and immediately after immersion to determine if there was a change in the properties of the material.
study was conducted at the Advanced Medical Polymer Group in the Libyan Polymer Research Center to evaluate the surface properties of prosthodontic polymer impression materials.
Data analysis included mean, standard deviation, and One-way ANOVA calculations.
The study showed that the surface properties of dental polymer impression materials were affected by disinfection methods.
Specifically, for alginate material, there were significant differences in surface properties between the control group (before immersion) and after immersion in zeta 7 solution and ASEPTOPRINT spray.
However, for addition silicone (putty), there was a significant difference in surface properties between the control group and after immersion in zeta 7 solution, while immersion in spray did not show a significant difference.
For condensation silicone (putty) material, there were significant differences in surface properties between the control group and after immersion in both zeta 7 solution and ASEPTOPRINT spray.
The study concluded that disinfection methods can affect the surface properties of dental polymer impression materials.

Related Results

Nanogold and nanosilver hybrid polymer materials
Nanogold and nanosilver hybrid polymer materials
<p>Significant opportunities exist in both the scientific and industrial sectors for the development of new generation hybrid materials. These multifunctional hybrid material...
Evaluating the Surface Properties of Prosthodontic Polymer Impression Materials
Evaluating the Surface Properties of Prosthodontic Polymer Impression Materials
Surface properties of prosthodontic polymer impression materials, such as hardness, roughness, and accuracy, are crucial for the accurate replication of oral structures in restorat...
Study on High-Concentration Polymer Flooding in Lamadian Oilfield, Daqing
Study on High-Concentration Polymer Flooding in Lamadian Oilfield, Daqing
Abstract Taking PI1-2 oil-bearing formations of northeast block in Lamadian oilfield as an example, laboratory experiments of high-concentration polymer flooding in artificial five...
Health-related quality of life after prosthodontic rehabilitation in patients with COVID-19-associated mucormycosis: A systematic review
Health-related quality of life after prosthodontic rehabilitation in patients with COVID-19-associated mucormycosis: A systematic review
Health-related quality of life (HRQOL) measures an individual’s ability to function optimally in various aspects of life and their subjective sense of well-being across the physica...
Contemplating G20 Presidency Branding and Impression Management - Local and Global Contextual Organization Perspectives
Contemplating G20 Presidency Branding and Impression Management - Local and Global Contextual Organization Perspectives
This review seeks to examine the effectiveness of impression management through the lens of the G20 Presidency branding for lessons in the efforts of organizations when expanding i...
Barrier Polymers
Barrier Polymers
AbstractBarrier polymers are used for many packaging and protective applications. As barriers they separate a system, such as an article of food or an electronic component, from an...
Dimensional Stability and Accuracy of Silicone Impression Materials After Ozone Water Disinfection: An In Vitro Study
Dimensional Stability and Accuracy of Silicone Impression Materials After Ozone Water Disinfection: An In Vitro Study
Objectives: This study evaluated the effect of ozone water disinfection on dimensional stability and accuracy of silicone impression materials. Materials and Methods: According to...

Back to Top