Javascript must be enabled to continue!
TCAD Calibration of High-Speed Si/SiGe HBTs in 55-nm BiCMOS
View through CrossRef
This paper presents and discusses the challenges and solutions to calibrate the TCAD of high-speed DPSA-SEG Si/SiGe HBTs in 55-nm BiCMOS. The variation of the 1D doping profiles with the emitter width observed from EDX measurements has been addressed by TCAD simulation. Simplified base link formation by controlling the boron diffusion through polycrystalline / mono-crystalline interface in Sprocess simulation is a central step to capture a reasonable maximum oscillation frequency (f
MAX). Finally all physical models including band-gap narrowing, saturation velocity, high-field mobility and SRH recombination, which impact the SiGe:C HBTs performance, are calibrated in Sdevice module of Synopsys®.
The Electrochemical Society
Title: TCAD Calibration of High-Speed Si/SiGe HBTs in 55-nm BiCMOS
Description:
This paper presents and discusses the challenges and solutions to calibrate the TCAD of high-speed DPSA-SEG Si/SiGe HBTs in 55-nm BiCMOS.
The variation of the 1D doping profiles with the emitter width observed from EDX measurements has been addressed by TCAD simulation.
Simplified base link formation by controlling the boron diffusion through polycrystalline / mono-crystalline interface in Sprocess simulation is a central step to capture a reasonable maximum oscillation frequency (f
MAX).
Finally all physical models including band-gap narrowing, saturation velocity, high-field mobility and SRH recombination, which impact the SiGe:C HBTs performance, are calibrated in Sdevice module of Synopsys®.
Related Results
TCAD Calibration of High-Speed Si/SiGe HBTs in 55-nm BiCMOS
TCAD Calibration of High-Speed Si/SiGe HBTs in 55-nm BiCMOS
We present and discuss in this paper the challenges and solutions to calibrate the TCAD of high-speed DPSA-SEG Si/SiGe HBTs in 55-nm BiCMOS (B55) [1]. Both fabrication process and ...
A Benchmark of Germane and Digermane for the Low Temperature Growth of Intrinsic and Heavily in-situ Boron-Doped SiGe
A Benchmark of Germane and Digermane for the Low Temperature Growth of Intrinsic and Heavily in-situ Boron-Doped SiGe
We have recently demonstrated the interest of using Si2H6 + GeH4 for the 450°C-500°C epitaxy of (i) intrinsic SiGe layers and (ii) SiGe:B raised sources and drains [1-4]. One way o...
(Invited) Strategies for Calibration Cost Reduction in Heterogeneous Chemical Sensor Arrays
(Invited) Strategies for Calibration Cost Reduction in Heterogeneous Chemical Sensor Arrays
Introduction
Heterogeneous gas sensor arrays coupled with machine learning algorithms have been proposed for a wide range of applications. However, i...
Relationship among total tear IgE, specific serum IgE, and total serum IgE levels in patients with pollen-induced allergic conjunctivitis
Relationship among total tear IgE, specific serum IgE, and total serum IgE levels in patients with pollen-induced allergic conjunctivitis
Abstract
Background
Recently, the number of patients with pollinosis, particularly Japanese cedar pollinosis, has markedly increased. We previously ...
SiGe/Si Microwave Photonic devices and Interconnects towards Silicon-based full Optical Links
SiGe/Si Microwave Photonic devices and Interconnects towards Silicon-based full Optical Links
SiGe / Si micro-ondes photoniques Phototransistors et interconnexions vers Silicon-base tous les liens optiques
Avec la croissance forte de ces dernières années des...
Germanium/Silicon-Germanium Heterostructure Avalanche Photodiodes on Silicon
Germanium/Silicon-Germanium Heterostructure Avalanche Photodiodes on Silicon
Near-infrared photodiodes (PDs) of Ge on Si have been widely studied in Si photonics for the optical communications (1.3–1.6 μm). Ge-based avalanche PDs (APDs) have been also studi...
Analysis of Si/SiGe/Si double heterojunction band of a novelstructure of PIN electronic modulation
Analysis of Si/SiGe/Si double heterojunction band of a novelstructure of PIN electronic modulation
PIN is a common structure of electrical modulation in electro-optic modulator, and the performance of the electro-optic modulator is directly affected by the carrier injection in P...
Anisotropic selective etching between SiGe and Si
Anisotropic selective etching between SiGe and Si
Abstract
In Si/SiGe dual-channel FinFETs, it is necessary to simultaneously control the etched amounts of SiGe and Si. However, the SiGe etch rate is higher than ...

