Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Numerical analysis of dynamic wind turbine airfoil characteristics in transonic flow

View through CrossRef
Abstract. Modern large wind turbine rotors can encounter airflow at inflow Mach numbers of around 0.3 and Reynolds numbers of the order of 10 million at the blade tip. Our previous study (Vitulano et al., 2025) showed that for these operational conditions, the incompressibility assumption is violated, and supersonic flow can occur locally. The present follow-up study reports on a numerical investigation of the dynamic behavior of the FFA-W3-211 wind turbine tip airfoil in transonic flow using unsteady Reynolds-averaged Navier–Stokes (URANS) simulations. The computations are performed for a highly unsteady aerodynamic regime by imposing a dynamic sinusoidal pitching motion across the transonic threshold determined in our previous study. This way, the airfoil is forced to enter and leave the supersonic flow regime. The simulations are conducted by varying the reduced frequency and the inflow Mach number, while keeping the Reynolds number constant at nine million. The choice of non-negligible inflow Mach numbers combined with high Reynolds numbers results in a realistic combination for full-scale wind turbines, but it is still challenging to achieve experimentally with the test facilities available nowadays. The dynamic pitching motion is found to lead to the formation of a hysteresis loop with an extent, depending on both reduced frequency and inflow Mach number. In particular, it is observed that an increase in one of these two parameters induces an expansion of the hysteresis loop with the consequences of (1) an increase in the magnitude and variability of loads experienced by the airfoil, (2) a delay in the beginning and ending of the transonic flow regime, and (3) the onset of shock waves occurring at inflow Mach numbers lower than those estimated under static conditions. Moreover, since the formation of a hysteresis loop implies a range of conditions in which transonic flow can occur, this needs to be better understood and considered when defining any safety margin in the definition of the transonic threshold for turbine design and operation purposes. In general, this study suggests the need to take into account dynamic effects when predicting aerodynamic loads and performance for next-generation wind turbine rotors.
Title: Numerical analysis of dynamic wind turbine airfoil characteristics in transonic flow
Description:
Abstract.
Modern large wind turbine rotors can encounter airflow at inflow Mach numbers of around 0.
3 and Reynolds numbers of the order of 10 million at the blade tip.
Our previous study (Vitulano et al.
, 2025) showed that for these operational conditions, the incompressibility assumption is violated, and supersonic flow can occur locally.
The present follow-up study reports on a numerical investigation of the dynamic behavior of the FFA-W3-211 wind turbine tip airfoil in transonic flow using unsteady Reynolds-averaged Navier–Stokes (URANS) simulations.
The computations are performed for a highly unsteady aerodynamic regime by imposing a dynamic sinusoidal pitching motion across the transonic threshold determined in our previous study.
This way, the airfoil is forced to enter and leave the supersonic flow regime.
The simulations are conducted by varying the reduced frequency and the inflow Mach number, while keeping the Reynolds number constant at nine million.
The choice of non-negligible inflow Mach numbers combined with high Reynolds numbers results in a realistic combination for full-scale wind turbines, but it is still challenging to achieve experimentally with the test facilities available nowadays.
The dynamic pitching motion is found to lead to the formation of a hysteresis loop with an extent, depending on both reduced frequency and inflow Mach number.
In particular, it is observed that an increase in one of these two parameters induces an expansion of the hysteresis loop with the consequences of (1) an increase in the magnitude and variability of loads experienced by the airfoil, (2) a delay in the beginning and ending of the transonic flow regime, and (3) the onset of shock waves occurring at inflow Mach numbers lower than those estimated under static conditions.
Moreover, since the formation of a hysteresis loop implies a range of conditions in which transonic flow can occur, this needs to be better understood and considered when defining any safety margin in the definition of the transonic threshold for turbine design and operation purposes.
In general, this study suggests the need to take into account dynamic effects when predicting aerodynamic loads and performance for next-generation wind turbine rotors.

Related Results

Investigating the Performance of a Novel Multi-Element Airfoil Concept Using Numerical Analysis
Investigating the Performance of a Novel Multi-Element Airfoil Concept Using Numerical Analysis
Separation control is one of the trending topics recently for Vertical Axis Wind Turbine (VAWT) applications, flow separation that occur on the suction side of an airfoil is a majo...
Study on the energy capture efficiency of flapping airfoil power generator using semiactive dual‐layer airfoils
Study on the energy capture efficiency of flapping airfoil power generator using semiactive dual‐layer airfoils
AbstractTo address the problem that the energy capture efficiencies of existing flapping airfoil power generators are lower than those of traditional turbine generators, a dual‐lay...
Study of Effect of Aerodynamic Interference on Transonic Flutter Characteristics of Airfoil
Study of Effect of Aerodynamic Interference on Transonic Flutter Characteristics of Airfoil
Aerodynamic interference occurs when biplane wings are placed close to each other. Investigating aerodynamic interference on the transonic flutter characteristics of these wings is...
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Background: The wind turbine is divided into a horizontal axis and a vertical axis depending on the relative positions of the rotating shaft and the ground. The advantage of the ch...
Numerical analysis of transonic flow over the FFA-W3-211 wind turbine tip airfoil
Numerical analysis of transonic flow over the FFA-W3-211 wind turbine tip airfoil
Abstract. Modern wind turbines are the largest rotating machines ever built, with blade lengths exceeding 100 m. Previous studies demonstrated how the flow around the tip airfoils ...
Airfoil Design for Vertical Axis Wind Turbine Operating at Variable Tip Speed Ratios
Airfoil Design for Vertical Axis Wind Turbine Operating at Variable Tip Speed Ratios
A new airfoil design method for H type vertical axis wind turbine is introduced in the present study. A novel indicator is defined to evaluate vertical axis wind turbine aerodynami...
Impact of Individual High-Pressure Turbine Rotor Purge Flows on Turbine Center Frame Aerodynamics
Impact of Individual High-Pressure Turbine Rotor Purge Flows on Turbine Center Frame Aerodynamics
This paper presents an experimental study of the impact of individual high-pressure turbine purge flows on the main flow in a downstream turbine center frame duct. Measurements wer...
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Background: In a wind farm, the wind speed of the downstream wind turbine will be lower than the wind speed of the upstream wind turbine due to the influence of the wake. Therefore...

Back to Top