Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Photocatalytic Decolorization and Biocidal Applications of Nonmetal Doped TiO2: Isotherm, Kinetic Modeling and In Silico Molecular Docking Studies

View through CrossRef
Textile dyes and microbial contamination of surface water bodies have been recognized as emerging quality concerns around the globe. The simultaneous resolve of such impurities can pave the route for an amicable technological solution. This study reports the photocatalytic performance and the biocidal potential of nitrogen-doped TiO2 against reactive black 5 (RB5), a double azo dye and E. coli. Molecular docking was performed to identify and quantify the interactions of the TiO2 with β-lactamase enzyme and to predict the biocidal mechanism. The sol-gel technique was employed for the synthesis of different mol% nitrogen-doped TiO2. The synthesized photocatalysts were characterized using thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller (BET) and diffuse reflectance spectroscopy (DRS). The effects of different synthesis and reaction parameters were studied. RB5 dye degradation was monitored by tracking shifts in the absorption spectrum and percent chemical oxygen demand (COD) removal. The best nanomaterial depicted 5.57 nm crystallite size, 49.54 m2 g−1 specific surface area, 11–40 nm particle size with spherical morphologies, and uniform distribution. The RB5 decolorization data fits well with the pseudo-first-order kinetic model, and the maximum monolayer coverage capacity for the Langmuir adsorption model was found to be 40 mg g−1 with Kads of 0.113 mg−1. The LH model yielded a higher coefficient KC (1.15 mg L−1 h−1) compared to the adsorption constant KLH (0.3084 L mg−1). 90% COD removal was achieved in 60 min of irradiation, confirmed by the disappearance of spectral peaks. The best-optimized photocatalysts showed a noticeable biocidal potential against human pathogenic strain E. coli in 150 min. The biocidal mechanism of best-optimized photocatalyst was predicted by molecular docking simulation against E. coli β-lactamase enzyme. The docking score (−7.6 kcal mol−1) and the binding interaction with the active site residues (Lys315, Thr316, and Glu272) of β-lactamase further confirmed that inhibition of β-lactamase could be a most probable mechanism of biocidal activity.
Title: Photocatalytic Decolorization and Biocidal Applications of Nonmetal Doped TiO2: Isotherm, Kinetic Modeling and In Silico Molecular Docking Studies
Description:
Textile dyes and microbial contamination of surface water bodies have been recognized as emerging quality concerns around the globe.
The simultaneous resolve of such impurities can pave the route for an amicable technological solution.
This study reports the photocatalytic performance and the biocidal potential of nitrogen-doped TiO2 against reactive black 5 (RB5), a double azo dye and E.
coli.
Molecular docking was performed to identify and quantify the interactions of the TiO2 with β-lactamase enzyme and to predict the biocidal mechanism.
The sol-gel technique was employed for the synthesis of different mol% nitrogen-doped TiO2.
The synthesized photocatalysts were characterized using thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller (BET) and diffuse reflectance spectroscopy (DRS).
The effects of different synthesis and reaction parameters were studied.
RB5 dye degradation was monitored by tracking shifts in the absorption spectrum and percent chemical oxygen demand (COD) removal.
The best nanomaterial depicted 5.
57 nm crystallite size, 49.
54 m2 g−1 specific surface area, 11–40 nm particle size with spherical morphologies, and uniform distribution.
The RB5 decolorization data fits well with the pseudo-first-order kinetic model, and the maximum monolayer coverage capacity for the Langmuir adsorption model was found to be 40 mg g−1 with Kads of 0.
113 mg−1.
The LH model yielded a higher coefficient KC (1.
15 mg L−1 h−1) compared to the adsorption constant KLH (0.
3084 L mg−1).
90% COD removal was achieved in 60 min of irradiation, confirmed by the disappearance of spectral peaks.
The best-optimized photocatalysts showed a noticeable biocidal potential against human pathogenic strain E.
coli in 150 min.
The biocidal mechanism of best-optimized photocatalyst was predicted by molecular docking simulation against E.
coli β-lactamase enzyme.
The docking score (−7.
6 kcal mol−1) and the binding interaction with the active site residues (Lys315, Thr316, and Glu272) of β-lactamase further confirmed that inhibition of β-lactamase could be a most probable mechanism of biocidal activity.

Related Results

TiO2-based heterostructure photocatalysts for enhanced hydrogen production
TiO2-based heterostructure photocatalysts for enhanced hydrogen production
The photocatalytic production of hydrogen from water and biomass derivatives such as ethanol, glycerol and sugars is a highly attractive strategy to generate environmentally benign...
Application of Dec 1 for Decolorization of Other Colored Substances
Application of Dec 1 for Decolorization of Other Colored Substances
Molasses is a primary carbon source, especially in the microbial industry; however, molasses includes many colored substances, like melanoidins, which become concentrated by the Ma...
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
AbstractTiO2 is the most important and remarkable material in photocatalytic applications. In the present work, pure and doped TiO2 nanoparticles were fabricated by the sol‐gel syn...
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
AbstractThe presence of reactive dyes in textile wastewater is a serious environmental concern due to their associated mutagenic and carcinogenic effects. The present study aims to...
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
A possible approach for photocatalytic selective organic synthesis is utilization of photocatalysts of or in defined microstructures. We have reported [1,2] fabrication of a novel...
Electrochemical Applications Reveal Enhanced Photocatalytic Performance of TiO2‐Doped ZnS Nanocomposites
Electrochemical Applications Reveal Enhanced Photocatalytic Performance of TiO2‐Doped ZnS Nanocomposites
ABSTRACTThe titanium dioxide (TiO2) nanoparticles were prepared by hydrothermal methods at ambient temperature. Based on XRD analysis, the average crystallite size of pure TiO2 nan...
Development of a novel photocatalyst for the photocatalytic treatment of industrial wastewater
Development of a novel photocatalyst for the photocatalytic treatment of industrial wastewater
Heterogeneous semiconductor photocatalysts have been shown to be efficient for the degradation of refractory organics into simple compounds. Among all photocatalysts, TiO2 is the m...
Development of a novel photocatalyst for the photocatalytic treatment of industrial wastewater
Development of a novel photocatalyst for the photocatalytic treatment of industrial wastewater
Heterogeneous semiconductor photocatalysts have been shown to be efficient for the degradation of refractory organics into simple compounds. Among all photocatalysts, TiO2 is the m...

Back to Top