Javascript must be enabled to continue!
Electrochemical Applications Reveal Enhanced Photocatalytic Performance of TiO2‐Doped ZnS Nanocomposites
View through CrossRef
ABSTRACTThe titanium dioxide (TiO2) nanoparticles were prepared by hydrothermal methods at ambient temperature. Based on XRD analysis, the average crystallite size of pure TiO2 nanoparticles and those doped with ZnS was calculated to be 58 and 54 nm, respectively. At an angle of 25.4°, the prominent peak observed at the (101) plane of TiO2 was confirmed. As can be seen from the collection of peaks, the TiO2 formed has an anatase‐type tetragonal crystal structure. A strain of −6.4541 × 10−4 and a grain size of 33 nm can be seen in the W–H plot for TiO2 nanoparticles. For doped ZnS nanoparticles, on the other hand, the values are 1.9448 × 10−4 and 47 nm. In our study, we found that doped nanoparticles were average grain size 134 nm, while pure nanoparticles were average grain size 146 nm. Doping reduces the size of the nanomaterial, which means that the TiO2 molecules form nanoclusters on their surfaces, which can lead to a larger grain size for a pure nanoparticle than for a doped nanoparticle. A wide range of functional groups and their associated bonds were investigated using FTIR spectra in synthesized nanomaterials. TiOTi bonds are subjected to a strong stretching vibration, which is confirmed by the absorption peaks from 450 cm−1 to 800 cm−1. The PL spectra for pure TiO2‐ and ZnS‐doped TiO2 containing nanocomposites of ZnS emit ultraviolet light at wavelengths of 362 and 379 nm in the UV region. Pure and doped samples with optical bandgap energies of ~3.04 and ~3.8 eV corresponding to anatase phases were near ~3.18 eV in Tauc plots. Since the TiO2‐doped ZnS heterojunction migrates photoexcited holes toward the interface, while electrons migrate toward the bulk, this results in photoexcited holes migrating toward the interface. To calculate the specific capacitance of the synthesized materials, cyclic voltammetry with pure ZnS and those with ZnS‐doped had specific capacitance values of 144.91 F/g and 120.11 F/g, respectively. The catalysts used were ZnS nanocomposite doped with TiO2 in addition to pure TiO2 nanoparticles. The degradation of dye within 80 min after sunlight exposure was monitored with a UV–Vis spectrophotometer at 20‐min intervals. ZnS nanoparticles doped with TiO2 display 87.8% greater efficiency than pure nanoparticles. Doped TiO2 nanocomposite degrades at an 87.8% rate, whereas pure TiO2 degrades at ~54%, indicating that the dopants enhance photocatalysis.
Title: Electrochemical Applications Reveal Enhanced Photocatalytic Performance of TiO2‐Doped ZnS Nanocomposites
Description:
ABSTRACTThe titanium dioxide (TiO2) nanoparticles were prepared by hydrothermal methods at ambient temperature.
Based on XRD analysis, the average crystallite size of pure TiO2 nanoparticles and those doped with ZnS was calculated to be 58 and 54 nm, respectively.
At an angle of 25.
4°, the prominent peak observed at the (101) plane of TiO2 was confirmed.
As can be seen from the collection of peaks, the TiO2 formed has an anatase‐type tetragonal crystal structure.
A strain of −6.
4541 × 10−4 and a grain size of 33 nm can be seen in the W–H plot for TiO2 nanoparticles.
For doped ZnS nanoparticles, on the other hand, the values are 1.
9448 × 10−4 and 47 nm.
In our study, we found that doped nanoparticles were average grain size 134 nm, while pure nanoparticles were average grain size 146 nm.
Doping reduces the size of the nanomaterial, which means that the TiO2 molecules form nanoclusters on their surfaces, which can lead to a larger grain size for a pure nanoparticle than for a doped nanoparticle.
A wide range of functional groups and their associated bonds were investigated using FTIR spectra in synthesized nanomaterials.
TiOTi bonds are subjected to a strong stretching vibration, which is confirmed by the absorption peaks from 450 cm−1 to 800 cm−1.
The PL spectra for pure TiO2‐ and ZnS‐doped TiO2 containing nanocomposites of ZnS emit ultraviolet light at wavelengths of 362 and 379 nm in the UV region.
Pure and doped samples with optical bandgap energies of ~3.
04 and ~3.
8 eV corresponding to anatase phases were near ~3.
18 eV in Tauc plots.
Since the TiO2‐doped ZnS heterojunction migrates photoexcited holes toward the interface, while electrons migrate toward the bulk, this results in photoexcited holes migrating toward the interface.
To calculate the specific capacitance of the synthesized materials, cyclic voltammetry with pure ZnS and those with ZnS‐doped had specific capacitance values of 144.
91 F/g and 120.
11 F/g, respectively.
The catalysts used were ZnS nanocomposite doped with TiO2 in addition to pure TiO2 nanoparticles.
The degradation of dye within 80 min after sunlight exposure was monitored with a UV–Vis spectrophotometer at 20‐min intervals.
ZnS nanoparticles doped with TiO2 display 87.
8% greater efficiency than pure nanoparticles.
Doped TiO2 nanocomposite degrades at an 87.
8% rate, whereas pure TiO2 degrades at ~54%, indicating that the dopants enhance photocatalysis.
Related Results
TiO2-based heterostructure photocatalysts for enhanced hydrogen production
TiO2-based heterostructure photocatalysts for enhanced hydrogen production
The photocatalytic production of hydrogen from water and biomass derivatives such as ethanol, glycerol and sugars is a highly attractive strategy to generate environmentally benign...
Synthesis of Polyaniline Supported CdS/CdS-ZnS/CdS-TiO2 Nanocomposite for Efficient Photocatalytic Applications
Synthesis of Polyaniline Supported CdS/CdS-ZnS/CdS-TiO2 Nanocomposite for Efficient Photocatalytic Applications
Photocatalytic degradation can be increased by improving photo-generated electrons and broadening the region of light absorption through conductive polymers. In that view, we have ...
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
A possible approach for photocatalytic selective organic synthesis is utilization of photocatalysts of or in defined microstructures. We have reported [1,2] fabrication of a novel...
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
AbstractTiO2 is the most important and remarkable material in photocatalytic applications. In the present work, pure and doped TiO2 nanoparticles were fabricated by the sol‐gel syn...
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
AbstractThe presence of reactive dyes in textile wastewater is a serious environmental concern due to their associated mutagenic and carcinogenic effects. The present study aims to...
Synthesis and Optical Properties of Annealed Cr Doped ZnS Nanoparticles
Synthesis and Optical Properties of Annealed Cr Doped ZnS Nanoparticles
Undoped and Cr doped ZnS nanoparticles with Cr concentrations of 3.0 at.% were prepared by a chemical co-precipitation method for the fist time, using 2-Mercaptoethanol as the capp...
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Visible-light-enhanced TiO2 nanocatalysts doped with Cu and Fe were synthesized using the sol–gel method to investigate their performance in degrading gaseous benzene. The structur...
Eu2+‐induced enhancement of defect luminescence of ZnS
Eu2+‐induced enhancement of defect luminescence of ZnS
AbstractThe Eu2+‐induced enhancement of defect luminescence of ZnS was studied in this work. While photoluminescence (PL) spectra exhibited 460 nm and 520 nm emissions in both ZnS ...

