Javascript must be enabled to continue!
Effects of Different Voltage Sag Types on Induction Motor
View through CrossRef
This paper analyzes effects caused by voltage sag types A, B, C and D on induction motor based on experimental test. The effect can be investigated in term the current peaks and speed variation. The magnitudes depend on magnitude of sag and duration, voltage sag types, during and recovery voltage sag. Several of voltage sag characteristics have been conducted in different magnitude, duration and sag types. The results show that the current peaks generated reach more than 4 times of normal current and it was achieved at recovery voltage instant. Sag magnitude has great influence on the current peak but sag duration is not significantly. Type A voltage sag only can cause the motor stop running and it was achieved when it was subjected to sag magnitude of 10% and 6s in duration. The motor stops running in shorter duration when it was subjected to interruption with sag duration of 4s. Therefore voltage sag of type A lead to more severe on induction motor if compared with other sag type. This is according to number of phase that experience sag. The magnitude and duration of voltage sags have influenced significantly on the motor speed only for low sag magnitude and long sag duration.
Trans Tech Publications, Ltd.
Title: Effects of Different Voltage Sag Types on Induction Motor
Description:
This paper analyzes effects caused by voltage sag types A, B, C and D on induction motor based on experimental test.
The effect can be investigated in term the current peaks and speed variation.
The magnitudes depend on magnitude of sag and duration, voltage sag types, during and recovery voltage sag.
Several of voltage sag characteristics have been conducted in different magnitude, duration and sag types.
The results show that the current peaks generated reach more than 4 times of normal current and it was achieved at recovery voltage instant.
Sag magnitude has great influence on the current peak but sag duration is not significantly.
Type A voltage sag only can cause the motor stop running and it was achieved when it was subjected to sag magnitude of 10% and 6s in duration.
The motor stops running in shorter duration when it was subjected to interruption with sag duration of 4s.
Therefore voltage sag of type A lead to more severe on induction motor if compared with other sag type.
This is according to number of phase that experience sag.
The magnitude and duration of voltage sags have influenced significantly on the motor speed only for low sag magnitude and long sag duration.
Related Results
Sliding Mode Controlled drives for wide speed operation of Threephase Induction Motor
Sliding Mode Controlled drives for wide speed operation of Threephase Induction Motor
Induction motor is widely used due to advantages in terms of performance, size, maintenance and efficiency compared to dc motor. Induction motor is either Scalar Controlled or Vect...
Comparative Analysis between Dynamic Voltage Restorer and PWM-Switched Autotransformer in Voltage Sag Mitigation
Comparative Analysis between Dynamic Voltage Restorer and PWM-Switched Autotransformer in Voltage Sag Mitigation
This research aims to address the problem of voltage sag, which is a significant power quality issue in power systems. Voltage sag can lead to power transmission and distribution l...
A Joint Data-Physics-Driven Approach to Voltage Sag Source Tracing and Inversion Estimation
A Joint Data-Physics-Driven Approach to Voltage Sag Source Tracing and Inversion Estimation
With the global energy transition and the development of smart
manufacturing, modern power systems are characterized by a high
penetration of renewable energy and power electronic ...
Equipment Performance Due to Voltage Sags – Test Results for Contactor and Induction Motor
Equipment Performance Due to Voltage Sags – Test Results for Contactor and Induction Motor
AbstractThis paper presents experimental test results of contactor and induction motor performances when they were supplied by voltage sags. A Programmable source is used to genera...
Self-Supervised Voltage Sag Source Identification Method Based on CNN
Self-Supervised Voltage Sag Source Identification Method Based on CNN
A self-supervised voltage sag source identification method based on a convolution neural network is proposed in this study. In addition, a self-supervised CNN (Convolutional Neural...
Outcomes Following Allogeneic Stem Cell Transplantation for AML in First Completion Remission Are Comparable between MRD Negative Patients and MRD Positive Patients Receiving Induction Only and Are Superior to MRD Positive Patients Receiving Induction and
Outcomes Following Allogeneic Stem Cell Transplantation for AML in First Completion Remission Are Comparable between MRD Negative Patients and MRD Positive Patients Receiving Induction Only and Are Superior to MRD Positive Patients Receiving Induction and
Background:
Data suggests that the presence of measurable residual disease (MRD) at the time of transplant for AML portends a poor prognosis. The timing of MRD asses...
Modelado de un Recuperador Dinámico de Tensión para el Mejoramiento de la Calidad de la Onda de Tensión
Modelado de un Recuperador Dinámico de Tensión para el Mejoramiento de la Calidad de la Onda de Tensión
[1] R. C. Dugan, H. W. Beaty, y S. Santoso, Electrical Power Systems Quality, Third edition. Tata McGraw Hill Education, 2012.[2] J. Arrilaga y N. R. Watson, Powe...
Clustering Analysis of Voltage Sag Events Based on Waveform Matching
Clustering Analysis of Voltage Sag Events Based on Waveform Matching
Voltage sags are a serious problem within power supplies, which pose threats to both residential electricity and industrial manufacturing. Since any one sag may be recorded by mult...

