Javascript must be enabled to continue!
Photothermal Response of Tissue Phantoms Containing Multi-Walled Carbon Nanotubes
View through CrossRef
Inclusion of multi-walled carbon nanotubes (MWNTs) into tissue prior to laser therapy has the potential to enhance the selectivity and effectiveness of cancer therapy by providing greater and more controlled thermal deposition. The purpose of this study was to investigate the optical and thermal response of tissue representative phantoms containing MWNTs to optical radiation. Tissue representative phantoms 20 mm in diameter and 1 mm in thickness were created from sodium alginate. Following the inclusion of MWNTs (900 nm in length, 40–60 nm in diameter) in phantoms, the distribution of MWNTs was observed using transmission electron microscopy. A predominantly, evenly dispersed and randomly oriented distribution of MWNTs was observed with a rare presence of MWNT clustering or clumping. In order to characterize the response of MWNT inclusion on optical properties of phantoms, the transmittance and reflectance spectra of phantoms with and without MWNT inclusion were measured with a spectrophotometer over a wavelength range of 200–1400 nm. Inclusion of MWNTs in phantoms dramatically enhanced light absorption across the entire wavelength range as evidenced by a diminished transmittance and reflectance compared with phantoms without MWNTs. In order to evaluate the spatiotemporal temperature distribution associated with laser irradiation of phantoms with and without MWNTs, the temperature was measured at discrete radial distances from the center of the incident laser beam using thermocouples. The rate of temperature increase and peak temperature for phantoms containing MWNTs was much greater compared with phantoms without MWNTs at all measurement locations. In conclusion, MWNT inclusion in tissue phantoms increases the optical absorption and temperature elevation, which may enable more effective photothermal therapies of human disease utilizing lasers.
Title: Photothermal Response of Tissue Phantoms Containing Multi-Walled Carbon Nanotubes
Description:
Inclusion of multi-walled carbon nanotubes (MWNTs) into tissue prior to laser therapy has the potential to enhance the selectivity and effectiveness of cancer therapy by providing greater and more controlled thermal deposition.
The purpose of this study was to investigate the optical and thermal response of tissue representative phantoms containing MWNTs to optical radiation.
Tissue representative phantoms 20 mm in diameter and 1 mm in thickness were created from sodium alginate.
Following the inclusion of MWNTs (900 nm in length, 40–60 nm in diameter) in phantoms, the distribution of MWNTs was observed using transmission electron microscopy.
A predominantly, evenly dispersed and randomly oriented distribution of MWNTs was observed with a rare presence of MWNT clustering or clumping.
In order to characterize the response of MWNT inclusion on optical properties of phantoms, the transmittance and reflectance spectra of phantoms with and without MWNT inclusion were measured with a spectrophotometer over a wavelength range of 200–1400 nm.
Inclusion of MWNTs in phantoms dramatically enhanced light absorption across the entire wavelength range as evidenced by a diminished transmittance and reflectance compared with phantoms without MWNTs.
In order to evaluate the spatiotemporal temperature distribution associated with laser irradiation of phantoms with and without MWNTs, the temperature was measured at discrete radial distances from the center of the incident laser beam using thermocouples.
The rate of temperature increase and peak temperature for phantoms containing MWNTs was much greater compared with phantoms without MWNTs at all measurement locations.
In conclusion, MWNT inclusion in tissue phantoms increases the optical absorption and temperature elevation, which may enable more effective photothermal therapies of human disease utilizing lasers.
Related Results
OBTAINING PARTIALLY UNZIPPED CARBON NANOTUBES FOR OXYGEN ELECTRODES
OBTAINING PARTIALLY UNZIPPED CARBON NANOTUBES FOR OXYGEN ELECTRODES
Various methods for unzipping carbon nanotubes are described, which differ only in the method of acting on multi-walled carbon nanotubes which leads to obtain a partial unzipped ca...
Functionalization of carbon nanotubes
Functionalization of carbon nanotubes
Carbon nanotubes have unique properties that make them attractive for different engineering applications. However, because of their chemical inertness, carbon nanotubes have to be ...
SU‐FF‐I‐26: Tissue Equivalent Phantoms for the Evaluation of Tube Current Modulated CT Dose and Image Quality
SU‐FF‐I‐26: Tissue Equivalent Phantoms for the Evaluation of Tube Current Modulated CT Dose and Image Quality
Purpose: To develop and test new, flexible, tissue‐equivalent phantoms for the evaluation of tube current modulation dose reduction and image quality in CT. The developed phantom m...
Filling and chemical modification of carbon nanotubes
Filling and chemical modification of carbon nanotubes
In order to utilize carbon nanotubes in nanofluidic device applications as well as nanocomposite reinforcement, more research on filling, surface chemistry and interaction of carbo...
Synthesis, characterization, and interfacial adhesion of titania iodine‐doped nanotubes architectures on additively manufactured Ti‐6Al‐4V implant
Synthesis, characterization, and interfacial adhesion of titania iodine‐doped nanotubes architectures on additively manufactured Ti‐6Al‐4V implant
AbstractThis study aimed to synthesize, characterize, and evaluate the adhesion strength of titania nanotubes (titania nanotubes) and iodine‐doped titania nanotubes (I‐titania nano...
Fabrication and excellent formaldehyde Gas sensing properties of Yb-doped In2O3 nanotubes
Fabrication and excellent formaldehyde Gas sensing properties of Yb-doped In2O3 nanotubes
Pure and Yb-doped In2O3 nanotubes have been successfully fabricated by using the single-capillary electrospinning method, followed by calcination. The morphological and structural ...
Mechanical properties, wear behavior and crystallographic texture of Al–multiwalled carbon nanotube composites developed by powder metallurgy route
Mechanical properties, wear behavior and crystallographic texture of Al–multiwalled carbon nanotube composites developed by powder metallurgy route
Aluminum (Al)-based metal matrix composites reinforced with multiwalled carbon nanotubes were developed by powder metallurgy route. The Al and multiwalled carbon nanotubes powder m...

