Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

The use of algae as carbon dioxide absorber in heat production industry

View through CrossRef
There are approximately 15 million users of system heat in Poland, but unfortunately nearly 70% of the fuel used in heat production is fossil fuel. Therefore, the CO2 emission reduction in the heat production industry is becoming one of the key challenges. City Heat Distribution Enterprise Ltd. in Nowy Sącz (Miejskie Przedsiębiorstwo Energetyki Cieplnej sp. z o.o.) has been conducting a self-financed research and development project entitled The use of algae as carbon dioxide absorbers at MPEC Nowy Sącz. The project deals with postcombustion CO2 capture using Chlorella vulgaris algae. As a result of tests conducted in a 1000 l hermetic container under optimal temperature and light conditions, the recovery of biomass can be performed in weekly cycles, yielding approximately 25 kilograms of biomass per year. Assuming that half of the dry mass of the algae is carbon, it can be said that 240 grams of carbon is bound in one cycle, which, converted to CO2, gives 880 grams of this gas. Our results showed that around 45.8 kilograms of CO2 per year was absorbed. Additionally, it is possible to use waste materials and by-products of technological processes as a nutrient medium for algae
Title: The use of algae as carbon dioxide absorber in heat production industry
Description:
There are approximately 15 million users of system heat in Poland, but unfortunately nearly 70% of the fuel used in heat production is fossil fuel.
Therefore, the CO2 emission reduction in the heat production industry is becoming one of the key challenges.
City Heat Distribution Enterprise Ltd.
in Nowy Sącz (Miejskie Przedsiębiorstwo Energetyki Cieplnej sp.
z o.
o.
) has been conducting a self-financed research and development project entitled The use of algae as carbon dioxide absorbers at MPEC Nowy Sącz.
The project deals with postcombustion CO2 capture using Chlorella vulgaris algae.
As a result of tests conducted in a 1000 l hermetic container under optimal temperature and light conditions, the recovery of biomass can be performed in weekly cycles, yielding approximately 25 kilograms of biomass per year.
Assuming that half of the dry mass of the algae is carbon, it can be said that 240 grams of carbon is bound in one cycle, which, converted to CO2, gives 880 grams of this gas.
Our results showed that around 45.
8 kilograms of CO2 per year was absorbed.
Additionally, it is possible to use waste materials and by-products of technological processes as a nutrient medium for algae.

Related Results

Optimization and Design of Carbon Dioxide Flooding
Optimization and Design of Carbon Dioxide Flooding
Abstract Increasing energy demand coupled with public concern for the environment has placed the oil industry in an awkward position as profit-making energy provider...
Effect of ocean heat flux on Titan's topography and tectonic stresses
Effect of ocean heat flux on Titan's topography and tectonic stresses
INTRODUCTIONThe thermo-mechanical evolution of Titan's ice shell is primarily controlled by the mode of the heat transfer in the ice shell and the amount of heat coming from the oc...
Active tunable terahertz bandwidth absorber based on single layer graphene
Active tunable terahertz bandwidth absorber based on single layer graphene
Abstract In this paper, an active tunable terahertz bandwidth absorber based on single-layer graphene is proposed, which consists of a graphene layer, a photo crysta...
Effects of the rate of carbon dioxide injection at the initial gas-water contact on the recovery factor
Effects of the rate of carbon dioxide injection at the initial gas-water contact on the recovery factor
The process of carbon dioxide injection into the initial gas-water contact with different rates of its injection, using a 3D model of a gas condensate reservoir, has been investiga...
Design of a Far-Infrared Broadband Metamaterial Absorber with High Absorption and Ultra-Broadband
Design of a Far-Infrared Broadband Metamaterial Absorber with High Absorption and Ultra-Broadband
We designed a metamaterial far-infrared absorber based on an MDM (metal–dielectric–metal) structure. We made a hollow crossed Ti microstructure at the top of the absorber. It is kn...
Automatic Identification of Harmful Algae Based On Multiple Convolutional Neural Networks and Transfer Learning
Automatic Identification of Harmful Algae Based On Multiple Convolutional Neural Networks and Transfer Learning
Abstract The monitoring of harmful algae is very important for the maintenance of the aquatic ecological environment. Traditional algae monitoring methods require professio...

Back to Top