Javascript must be enabled to continue!
Sensitized Yb3+ emission in (Nd, Yb):Y3Al5O12 transparent ceramics
View through CrossRef
The characteristics of Nd→Yb energy transfer in (Nd, Yb):Y3Al5O12 (YAG) transparent ceramics, obtained from steady state and dynamic spectral studies on different single doped and codoped samples, prepared by solid state synthesis, are presented. The Yb3+ emission in codoped (Nd, Yb):YAG samples under cw excitation of the donors (Nd3+) revealed efficient energy transfer to Yb3+ (at low temperatures too), due to the overlap of the Nd3+ F43/2→I49/2 emission and Yb3+ F27/2→F25/2 absorption. From the global decays of the Nd3+ F43/2 level in single and codoped samples, the transfer efficiencies were estimated; they increase with Yb3+ content reaching ∼93% for 1 at. % Nd, 5 at. % Yb:YAG sample. The mechanisms and parameters of the Nd→Yb energy transfer were inferred from the Nd3+ decays in the codoped samples, after the separation of the self-quenching inside the donors (Nd3+) from the transfer to acceptors (Yb3+). It was proved that the Nd→Yb energy is resonant and dominated by dipole-dipole interactions. Due to the large transfer efficiencies, (Nd, Yb):YAG ceramic could be a promising material for Yb3+ emission under pumping in strong Nd3+ absorption lines.
Title: Sensitized Yb3+ emission in (Nd, Yb):Y3Al5O12 transparent ceramics
Description:
The characteristics of Nd→Yb energy transfer in (Nd, Yb):Y3Al5O12 (YAG) transparent ceramics, obtained from steady state and dynamic spectral studies on different single doped and codoped samples, prepared by solid state synthesis, are presented.
The Yb3+ emission in codoped (Nd, Yb):YAG samples under cw excitation of the donors (Nd3+) revealed efficient energy transfer to Yb3+ (at low temperatures too), due to the overlap of the Nd3+ F43/2→I49/2 emission and Yb3+ F27/2→F25/2 absorption.
From the global decays of the Nd3+ F43/2 level in single and codoped samples, the transfer efficiencies were estimated; they increase with Yb3+ content reaching ∼93% for 1 at.
% Nd, 5 at.
% Yb:YAG sample.
The mechanisms and parameters of the Nd→Yb energy transfer were inferred from the Nd3+ decays in the codoped samples, after the separation of the self-quenching inside the donors (Nd3+) from the transfer to acceptors (Yb3+).
It was proved that the Nd→Yb energy is resonant and dominated by dipole-dipole interactions.
Due to the large transfer efficiencies, (Nd, Yb):YAG ceramic could be a promising material for Yb3+ emission under pumping in strong Nd3+ absorption lines.
Related Results
Upconversion luminescence in Yb3+ sensitized Er3+/Yb3+-codoped tellurite glasses
Upconversion luminescence in Yb3+ sensitized Er3+/Yb3+-codoped tellurite glasses
A series of Er3+/Yb3+-codoped,Ho3+/Yb3+-codoped,and Er3+/Yb3+/Ho3+-triply doped tellurite glasses were prepared by high-temperature melting. Under 975nm laser light excitation,inte...
Experimental optimal design of the Er3+/Yb3+ codoped BaGd2ZnO5 phosphor and its upconversion luminescence properties
Experimental optimal design of the Er3+/Yb3+ codoped BaGd2ZnO5 phosphor and its upconversion luminescence properties
In order to obtain the Er3+/Yb3+ co-doped BaGd2ZnO5 up-conversion phosphor which has the maximum green and red emission intensity, firstly, the method of homogeneous design rooted ...
KMnF3:Yb3+,Er3+ Core-Active-Shell Nanoparticles with Broadband Down-Shifting Luminescence at 1.5 μm for Polymer-Based Waveguide Amplifiers
KMnF3:Yb3+,Er3+ Core-Active-Shell Nanoparticles with Broadband Down-Shifting Luminescence at 1.5 μm for Polymer-Based Waveguide Amplifiers
In this study, we prepared cubic-phase oleic-acid-coated KMnF3: Yb3+,Er3+ nanoparticles (NPs) and NaYF4:Yb3+,Er3+ NPs, which were about 23 nm. From the down-shifting emissions spec...
Preparation and upconversion luminescence properties of Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphors
Preparation and upconversion luminescence properties of Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphors
The Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphor has been prepared by high temperature solid state reaction, and their upconversion (UC) luminescence properties and mechanisms are investig...
A New Chemical-Mechanical Polishing Method Based On Colloids Silica and MgO Was Developed For Polishing Y3Al5O12 Material
A New Chemical-Mechanical Polishing Method Based On Colloids Silica and MgO Was Developed For Polishing Y3Al5O12 Material
Abstract
The material yttrium aluminum oxide (Y3Al5O12) is one of the materials commonly used in laser devices. For application in optical devices, it is necessary to produ...
Induced emission cross section of Nd:Y3Al5O12 ceramics
Induced emission cross section of Nd:Y3Al5O12 ceramics
Optical absorption and emission spectra have been measured for Nd-doped Y3Al5O12 ceramics obtained by a urea precipitation method. The optical properties of the ceramics are almost...
Strong green upconversion emission in ZrO2:Yb3+–Ho3+ nanocrystals
Strong green upconversion emission in ZrO2:Yb3+–Ho3+ nanocrystals
Structural and upconversion emission properties of ZrO2:Yb3+–Ho3+ nanocrystals were analyzed as function of Yb3+ concentration. Structural characterization shows a crystallite size...
Z-scan measurements of nonlinear refraction in Yb3+: KY(WO4)2
Z-scan measurements of nonlinear refraction in Yb3+: KY(WO4)2
Recently, laser performance of new Yb3+: KY(WO4)2 crystal (Yb3+:KYW) has been obtained at 1025 nm [1]. The Yb3+:KYW crystal is promising for the microchip and passive mode-locked l...

