Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

KMnF3:Yb3+,Er3+ Core-Active-Shell Nanoparticles with Broadband Down-Shifting Luminescence at 1.5 μm for Polymer-Based Waveguide Amplifiers

View through CrossRef
In this study, we prepared cubic-phase oleic-acid-coated KMnF3: Yb3+,Er3+ nanoparticles (NPs) and NaYF4:Yb3+,Er3+ NPs, which were about 23 nm. From the down-shifting emissions spectra of the two NPs obtained by 980 nm excitation, we observed the fact that the KMnF3: 18%Yb3+,1%Er3+ NPs were a luminescent material with a broadband near-infrared emission of 1.5 μm, and full-width at half-maximum (FWHM) of 55 cm−1, which was wider than that of the NaYF4: 18%Yb3+,1% NPs. Therefore, we believe that the oleic-acid-coated KMnF3:Yb3+,Er3+ NPs have great potential in fabricating broadband waveguide amplifiers. Through epitaxial growth of a KMnF3: Yb3+ active-shell on the core NPs, we compounded KMnF3:Yb3+,Er3+@KMnF3:Yb3+ core-active-shell NPs whose 1.5-μm infrared emissions intensity was 3.4 times as strong as that of the core NPs. In addition, we manufactured waveguide amplifiers using KMnF3:18%Yb3+,1%Er3+@KMnF3:2%Yb3+ NPs as the core materials of the waveguide amplifiers. When the input signal power was 0.2 mW and the pump power was 200 mW, we achieved a relative gain of 0.6 dB at 1534 nm in a 10-mm long waveguide.
Title: KMnF3:Yb3+,Er3+ Core-Active-Shell Nanoparticles with Broadband Down-Shifting Luminescence at 1.5 μm for Polymer-Based Waveguide Amplifiers
Description:
In this study, we prepared cubic-phase oleic-acid-coated KMnF3: Yb3+,Er3+ nanoparticles (NPs) and NaYF4:Yb3+,Er3+ NPs, which were about 23 nm.
From the down-shifting emissions spectra of the two NPs obtained by 980 nm excitation, we observed the fact that the KMnF3: 18%Yb3+,1%Er3+ NPs were a luminescent material with a broadband near-infrared emission of 1.
5 μm, and full-width at half-maximum (FWHM) of 55 cm−1, which was wider than that of the NaYF4: 18%Yb3+,1% NPs.
Therefore, we believe that the oleic-acid-coated KMnF3:Yb3+,Er3+ NPs have great potential in fabricating broadband waveguide amplifiers.
Through epitaxial growth of a KMnF3: Yb3+ active-shell on the core NPs, we compounded KMnF3:Yb3+,Er3+@KMnF3:Yb3+ core-active-shell NPs whose 1.
5-μm infrared emissions intensity was 3.
4 times as strong as that of the core NPs.
In addition, we manufactured waveguide amplifiers using KMnF3:18%Yb3+,1%Er3+@KMnF3:2%Yb3+ NPs as the core materials of the waveguide amplifiers.
When the input signal power was 0.
2 mW and the pump power was 200 mW, we achieved a relative gain of 0.
6 dB at 1534 nm in a 10-mm long waveguide.

Related Results

Upconversion luminescence in Yb3+ sensitized Er3+/Yb3+-codoped tellurite glasses
Upconversion luminescence in Yb3+ sensitized Er3+/Yb3+-codoped tellurite glasses
A series of Er3+/Yb3+-codoped,Ho3+/Yb3+-codoped,and Er3+/Yb3+/Ho3+-triply doped tellurite glasses were prepared by high-temperature melting. Under 975nm laser light excitation,inte...
Preparation and upconversion luminescence properties of Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphors
Preparation and upconversion luminescence properties of Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphors
The Ba5SiO4Cl6: Yb3+, Er3+, Li+ phosphor has been prepared by high temperature solid state reaction, and their upconversion (UC) luminescence properties and mechanisms are investig...
Experimental optimal design of the Er3+/Yb3+ codoped BaGd2ZnO5 phosphor and its upconversion luminescence properties
Experimental optimal design of the Er3+/Yb3+ codoped BaGd2ZnO5 phosphor and its upconversion luminescence properties
In order to obtain the Er3+/Yb3+ co-doped BaGd2ZnO5 up-conversion phosphor which has the maximum green and red emission intensity, firstly, the method of homogeneous design rooted ...
Optical Temperature Sensor Based on Er3+/Yb3+‐Codoped Perovskite BaZrO3
Optical Temperature Sensor Based on Er3+/Yb3+‐Codoped Perovskite BaZrO3
ABSTRACTThe Er3+/Yb3+‐codoped perovskite BaZrO3 (BaZrO3:Er3+, Yb3+) phosphor was synthesized via a simple, rapid, and cost‐effective pyrolysis reaction. The perovskite crystals BaZ...
Nanogold and nanosilver hybrid polymer materials
Nanogold and nanosilver hybrid polymer materials
<p>Significant opportunities exist in both the scientific and industrial sectors for the development of new generation hybrid materials. These multifunctional hybrid material...
EVALUASI DAMPAK PROGRAM BROADBAND LEARNING CENTER DI TAMAN PRESTASI SURABAYA
EVALUASI DAMPAK PROGRAM BROADBAND LEARNING CENTER DI TAMAN PRESTASI SURABAYA
Broadband Learning Center adalah program pelatihan komputer gratis yang disediakan oleh Pemerintah Kota Surabaya yang bertujuan untuk menjawab permasalahan di Surabaya seperti masy...
Novel Blue-Wavelength-Blocking Contact Lens with Er3+/TiO2 NPs: Manufacture and Characterization
Novel Blue-Wavelength-Blocking Contact Lens with Er3+/TiO2 NPs: Manufacture and Characterization
Thermally stable titanium dioxide nanoparticles (TiO2 NPs) doped with erbium ions (Er3+) are characterized by uniformity, low excitation energy, and high surface area. The impregna...
Antimicrobial activity of ciprofloxacin-coated gold nanoparticles on selected pathogens
Antimicrobial activity of ciprofloxacin-coated gold nanoparticles on selected pathogens
Antibiotic resistance amongst bacterial pathogens is a crisis that has been worsening over recent decades, resulting in serious and often fatal infections that cannot be treated by...

Back to Top