Experimental Investigation of Different Extraction Methods for Producing Biofuel from Jatropha Seeds and Castor Seeds

While energy production is highly dependent on fossil fuels, which consider the main source of global warming, biofuels would play a significant impact in diminishing such warming. In this paper, biooils were extracted from inedible seeds (Jatropha and Castor) using different continuous devices (solvents, screw presses, and hydraulic press-machines), aiming to achieve the highest oil’s yield of improved extraction properties at reduced time and energy. A wide range of engine speeds of 35, 60, 85, 110, and 135 rpm and preheating temperatures of 100, 125, 150, 175, 200, and 250°C were extensively studied to find their impact on the extraction properties. Results proved the ability of the screw press machine to extract the highest biooil yields from Jatropha and castor seeds. The optimum yield of Jatropha and castor were achieved at an extraction temperature range of 150-175°C at a motor speed of 135 rpm and a temperature range of 200-250°C at a motor speed of 35 rpm, respectively. Noteworthy, the yield of extracted castor oil is potentially solidified at low temperatures <100°C, leading oil samples to become like a dough. In contrast, lowering the temperatures of the Jatropha seeds improved the physical and chemical properties of the extracted oil. At a certain temperature (e.g., 100°C), the properties of both extracted and diesel oils are quite similar, which can be used directly in diesel engines.