Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

The Effect of Electromagnetic Stirring on Steel Strand Quality

View through CrossRef
Application experiments have been done to research the strand quality of high carbon steel 65Mn under the condition of electromagnetic stirring. The experimental results show that the effect of electromagnetic stirring with stirring rollers in side-side disposition mode is better than that in face-face disposition mode. The effect of electromagnetic stirring is also increased with the increasing of current intensity, and the continuous stirring is better than alternating stirring. Thus, conclusion could be arrived that the strand inner quality is improved obviously by the adoption of electromagnetic stirring due to 32% increase of equiaxed zone ratio in the strand and the decrease from B0.5 to C1.0 of the center segregation grade.
Title: The Effect of Electromagnetic Stirring on Steel Strand Quality
Description:
Application experiments have been done to research the strand quality of high carbon steel 65Mn under the condition of electromagnetic stirring.
The experimental results show that the effect of electromagnetic stirring with stirring rollers in side-side disposition mode is better than that in face-face disposition mode.
The effect of electromagnetic stirring is also increased with the increasing of current intensity, and the continuous stirring is better than alternating stirring.
Thus, conclusion could be arrived that the strand inner quality is improved obviously by the adoption of electromagnetic stirring due to 32% increase of equiaxed zone ratio in the strand and the decrease from B0.
5 to C1.
0 of the center segregation grade.

Related Results

KAJIAN EFISIENSI PERENCANAAN PC-I GIRDER DENGAN MENGGUNAKAN SISTEM STRAND 0,5” DAN 0,6” TERHADAP KEKUATAN DAN BIAYA
KAJIAN EFISIENSI PERENCANAAN PC-I GIRDER DENGAN MENGGUNAKAN SISTEM STRAND 0,5” DAN 0,6” TERHADAP KEKUATAN DAN BIAYA
Prestressed concrete can be defined as concrete that given internal compressive stress such that it can reduce the tensile stress caused by external load to a certain condition. St...
Short-lived minus-strand polymerase for Semliki Forest virus
Short-lived minus-strand polymerase for Semliki Forest virus
Semliki Forest virus (SFV)-infected BHK-21, Vero, and HeLa cells incorporated [3H]uridine into 42S and 26S plus-strand RNA and into viral minus-strand RNA (complementary to the 42S...
Clad Steel Pipe for Corrosive Gas Transportation
Clad Steel Pipe for Corrosive Gas Transportation
ABSTRACT This paper describes the applicability and reliability Of clad steel pipe and its welds in sour gas environments in comparison with those of 22%Cr-5.5%Ni...
Electromagnetic radiation of hybrid vehicles
Electromagnetic radiation of hybrid vehicles
Problem. As a result of automobile traffic every year 20-30% of the territory of cities are subject to electromagnetic pollution in cities and settlements. This is due to the incre...
Experimental analysis of contact forces between strands in three-strand ropes with varying twist parameters and filament counts
Experimental analysis of contact forces between strands in three-strand ropes with varying twist parameters and filament counts
Aramid fiber ropes are widely used, owing to their high strength and abrasion resistance. Calculating the contact force in these ropes at the interface of the strand–strand contact...

Back to Top