Javascript must be enabled to continue!
Improvement of Steam Power Plants Performance Using a Heat Exchanger
View through CrossRef
The present work focuses on the improvement of the ideal Rankine cycle performance used in steam power plants. Improving the steam power plant efficiency, or its components performance is desirable where the absence of renewable energy power conversion systems and the shortage of conventional fuels sources take place. The present work studies the possibility of using a counter flow heat exchanger along with the main components of the ideal Rankine cycle. The proposed counter flow heat exchanger will include the flow of compressed liquid exiting the pump and the flow of superheated steam exiting the steam turbine. The advantages of the proposed system which is investigated here include extracting heat through the heat exchanger which can be added to boiler for superheated steam production and thus reduce the amount fuel needed. In addition, since the proposed system assumes a superheated steam at the exit of the steam turbine, so no moisture is expected to form and thus increased effeciency of the steam turbine will be expected. The presents results show that the amount of heat extracted through the proposed heat exchanger for diffrent systematic four test cases of differet exits' temperatures of steam turbines and heat exchanger is systematically increasing when the those temperatures are decreasing suggesting the advantage of the proposed heat exchanger. In addition, however the proposed system eliminated the presence of moisture at the steam turbine which improve the performance of the steam turbine, a systematic reduction reduction in the delivered work by the steam turbine
Israa University - Gaza
Title: Improvement of Steam Power Plants Performance Using a Heat Exchanger
Description:
The present work focuses on the improvement of the ideal Rankine cycle performance used in steam power plants.
Improving the steam power plant efficiency, or its components performance is desirable where the absence of renewable energy power conversion systems and the shortage of conventional fuels sources take place.
The present work studies the possibility of using a counter flow heat exchanger along with the main components of the ideal Rankine cycle.
The proposed counter flow heat exchanger will include the flow of compressed liquid exiting the pump and the flow of superheated steam exiting the steam turbine.
The advantages of the proposed system which is investigated here include extracting heat through the heat exchanger which can be added to boiler for superheated steam production and thus reduce the amount fuel needed.
In addition, since the proposed system assumes a superheated steam at the exit of the steam turbine, so no moisture is expected to form and thus increased effeciency of the steam turbine will be expected.
The presents results show that the amount of heat extracted through the proposed heat exchanger for diffrent systematic four test cases of differet exits' temperatures of steam turbines and heat exchanger is systematically increasing when the those temperatures are decreasing suggesting the advantage of the proposed heat exchanger.
In addition, however the proposed system eliminated the presence of moisture at the steam turbine which improve the performance of the steam turbine, a systematic reduction reduction in the delivered work by the steam turbine.
Related Results
The Hot Test of Primary Separation Equipment of Steam Generator for CAP1400 Nuclear Power Plant
The Hot Test of Primary Separation Equipment of Steam Generator for CAP1400 Nuclear Power Plant
A new type of Steam separator for CAP1400 Steam Generator is introduced. The result of characteristic experiment, the variables of which contain steam load, saturated water flow an...
Parametric Modeling and Economic Analysis of a 2MWth 3-Stream sCO2 Heat Exchanger
Parametric Modeling and Economic Analysis of a 2MWth 3-Stream sCO2 Heat Exchanger
Abstract
This paper presents the design and cost optimization of a novel 2MWth 3-stream sCO2 plate-fin heat exchanger. This heat exchanger design is unique in that i...
TINBOP Cyclic Steam Injection Enhances Oil Recovery in Mature Steamfloods
TINBOP Cyclic Steam Injection Enhances Oil Recovery in Mature Steamfloods
Abstract
In a previous paper (SPE/PS-CIM/CHOA 97850), we presented our findings on a novel cyclic steam injection method that we developed. The Top-Injection Bott...
Downhole Steam Generation for Green Heavy Oil Recovery
Downhole Steam Generation for Green Heavy Oil Recovery
Abstract
The ultimate target of heavy oil recovery is to enhance oil mobility by transferring steam's thermal energy to the oil phase, incrementing its temperature, ...
A Fast 3-D Interface Simulator for Steam Drives
A Fast 3-D Interface Simulator for Steam Drives
Abstract
Here we describe a fast 3-D steam drive simulator. We use an interface model, where the single phase steam zone is separated from the two phase liquid zo...
Kaji efisiensi temperatur penukar panas dengan variasi aliran untuk aplikasi pengering
Kaji efisiensi temperatur penukar panas dengan variasi aliran untuk aplikasi pengering
Abstrak Heat exchanger atau alat penukar panas adalah alat-alat yang digunakan untuk mengubah temperatur fluida atau mengubah fasa fluida dengan cara mempertukarkan panasnya dengan...
Steam-CO Recovery Processes For Bottom Water Oil Reservoirs
Steam-CO Recovery Processes For Bottom Water Oil Reservoirs
Abstract
Based on Pujol and Boberg's scaling criteria, a series of experiments on steam-CO2 injection strategies was conducted in a high temperature, high pressur...
A Reservoir Assessment of The Geysers Geothermal Field
A Reservoir Assessment of The Geysers Geothermal Field
Summary
Big Sulphur Creek fault zone may be part of a deep-seated, wrench-style fault system through which hydrothermal fluids from deeper horizons rise to relati...

