Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Calculation on Bending Stiffness of RC Short Beam Strengthened by CFRP
View through CrossRef
Based on the bending tests of seven reinforced concrete (RC) short beams strengthened with carbon fiber reinforced polymer (CFRP), the bending stiffness curves of the whole process of the short beams strengthened with CFRP were obtained. The variation law of bending stiffness curve of short beam in the whole loading process was analyzed. Based on the reasonable calculation assumption, the calculation method of flexural rigidity of short reinforced concrete beams strengthened with CFRP sheets in the whole loading process was put forward. The comparison between the calculated value and the test value of bending stiffness showed that the calculation method of bending stiffness was reasonable and had high calculation accuracy. This calculation method can be used not only in the calculation of flexural rigidity of short reinforced concrete beams strengthened with CFRP sheets but also in the calculation of flexural rigidity of ordinary short reinforced concrete beams. The calculation method in this paper can provide a theoretical basis for the deformation calculation of reinforced concrete short beams strengthened with CFRP sheets.
Title: Calculation on Bending Stiffness of RC Short Beam Strengthened by CFRP
Description:
Based on the bending tests of seven reinforced concrete (RC) short beams strengthened with carbon fiber reinforced polymer (CFRP), the bending stiffness curves of the whole process of the short beams strengthened with CFRP were obtained.
The variation law of bending stiffness curve of short beam in the whole loading process was analyzed.
Based on the reasonable calculation assumption, the calculation method of flexural rigidity of short reinforced concrete beams strengthened with CFRP sheets in the whole loading process was put forward.
The comparison between the calculated value and the test value of bending stiffness showed that the calculation method of bending stiffness was reasonable and had high calculation accuracy.
This calculation method can be used not only in the calculation of flexural rigidity of short reinforced concrete beams strengthened with CFRP sheets but also in the calculation of flexural rigidity of ordinary short reinforced concrete beams.
The calculation method in this paper can provide a theoretical basis for the deformation calculation of reinforced concrete short beams strengthened with CFRP sheets.
Related Results
EVALUASI KINERJA ENERGI SERAP BALOK JEMBATAN KOMPOSIT KAYU LAMINASI-BETON BERLAPIS CFRP PADA BEBAN STATIS
EVALUASI KINERJA ENERGI SERAP BALOK JEMBATAN KOMPOSIT KAYU LAMINASI-BETON BERLAPIS CFRP PADA BEBAN STATIS
This study aims to analyse the ability of a glulam-concrete composite bridge beam coated with carbon fibre-reinforced polymer (CFRP) to absorb energy under static loading condition...
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
"Since bumper reinforcements are positioned at front/rear ends of vehicles, weight reduction of the bumper reinforcements improves vehicle dynamic performance by reducing a yaw mom...
CFRP Mooring Lines For Modu Applications
CFRP Mooring Lines For Modu Applications
Abstract
Precise station keeping is a requirement of mobile offshore drilling units (MODUs) and production vessels operating in ultra-deepwater. DeepSea Engineeri...
Numerical Investigation for Strengthening a Concrete Filled Steel Tube Composite Columns Using CFRP
Numerical Investigation for Strengthening a Concrete Filled Steel Tube Composite Columns Using CFRP
Hollow and concrete-filled steel tubes (CFSTs) are widely used as columns in many structural systems and local buckling can occur when they are subjected to axial compression loadi...
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
AbstractThe retrofitting method using CFRP (Carbon Fiber Reinforced Plastic) plates was applied to a steel highway bridge in 2002 for the first time in Japan, where some of CFRP pl...
Effects of Tool-Edge Form during the Drilling of CFRP
Effects of Tool-Edge Form during the Drilling of CFRP
The drilling of carbon fiber reinforced plastics (CFRP) involves many problems such as an extremely short tool life or CFRP delamination occurring at the exit surface of drill. In ...
Shear Capacity of RC Beam with Opening Strengthened Using CFRP Sheet and Plate
Shear Capacity of RC Beam with Opening Strengthened Using CFRP Sheet and Plate
This paper investigates the use of carbon fibre-reinforced polymer (CFRP) sheets and plates for the bi-directional reinforcement of reinforced concrete ...
Bond Performance of Sand Coated UHM CFRP Tendons in High Performance Concrete
Bond Performance of Sand Coated UHM CFRP Tendons in High Performance Concrete
The bond behaviour of novel, sand-coated ultra-high modulus (UHM) carbon fibre reinforced polymers (CFRP) tendons to high performance concrete (HPC) was studied by a combined numer...