Javascript must be enabled to continue!
An InP/Si heterojunction photodiode fabricated by self-aligned corrugated epitaxial lateral overgrowth
View through CrossRef
An n-InP/p-Si heterojunction photodiode fabricated by corrugated epitaxial lateral overgrowth (CELOG) method is presented. N-InP/p-Si heterojunction has been achieved from a suitable pattern containing circular shaped openings in a triangular lattice on the InP seed layer on p-Si substrate and subsequent CELOG of completely coalesced n-InP. To avoid current path through the seed layer in the final photodiode, semi-insulating InP:Fe was grown with adequate thickness prior to n-InP growth in a low pressure hydride vapor phase epitaxy reactor. The n-InP/p-Si heterointerface was analyzed by scanning electron microscopy and Raman spectroscopy. Room temperature cross-sectional photoluminescence (PL) mapping illustrates the defect reduction effect in InP grown on Si by CELOG method. The InP PL intensity measured above the InP/Si heterojunction is comparable to that of InP grown on a native planar substrate indicating low interface defect density of CELOG InP despite of 8% lattice mismatch with Si. The processed n-InP/p-Si heterojunction photodiodes show diode characteristics from the current-voltage (I-V) measurements with a dark current density of 0.324 mA/cm2 at a reverse voltage of −1 V. Under the illumination of AM1.5 conditions, the InP/Si heterojunction photodiode exhibited photovoltaic effect with an open circuit voltage of 180 mV, a short circuit current density of 1.89 mA/cm2, an external quantum efficiency of 4.3%, and an internal quantum efficiency of 6.4%. This demonstration of epitaxially grown InP/Si heterojunction photodiode will open the door for low cost and high efficiency solar cells and photonic integration of III-Vs on silicon.
Title: An InP/Si heterojunction photodiode fabricated by self-aligned corrugated epitaxial lateral overgrowth
Description:
An n-InP/p-Si heterojunction photodiode fabricated by corrugated epitaxial lateral overgrowth (CELOG) method is presented.
N-InP/p-Si heterojunction has been achieved from a suitable pattern containing circular shaped openings in a triangular lattice on the InP seed layer on p-Si substrate and subsequent CELOG of completely coalesced n-InP.
To avoid current path through the seed layer in the final photodiode, semi-insulating InP:Fe was grown with adequate thickness prior to n-InP growth in a low pressure hydride vapor phase epitaxy reactor.
The n-InP/p-Si heterointerface was analyzed by scanning electron microscopy and Raman spectroscopy.
Room temperature cross-sectional photoluminescence (PL) mapping illustrates the defect reduction effect in InP grown on Si by CELOG method.
The InP PL intensity measured above the InP/Si heterojunction is comparable to that of InP grown on a native planar substrate indicating low interface defect density of CELOG InP despite of 8% lattice mismatch with Si.
The processed n-InP/p-Si heterojunction photodiodes show diode characteristics from the current-voltage (I-V) measurements with a dark current density of 0.
324 mA/cm2 at a reverse voltage of −1 V.
Under the illumination of AM1.
5 conditions, the InP/Si heterojunction photodiode exhibited photovoltaic effect with an open circuit voltage of 180 mV, a short circuit current density of 1.
89 mA/cm2, an external quantum efficiency of 4.
3%, and an internal quantum efficiency of 6.
4%.
This demonstration of epitaxially grown InP/Si heterojunction photodiode will open the door for low cost and high efficiency solar cells and photonic integration of III-Vs on silicon.
Related Results
Preliminary investigation on performance of photodiode sensor as a dosimeter
Preliminary investigation on performance of photodiode sensor as a dosimeter
Radiation dosimetry in the health and medicine field is crucial to ensure there is no unnecessary ionizing radiation exposure to patients and personnel. While various types of semi...
Cushioning Properties of Multi-layer Corrugated Sandwich Structures
Cushioning Properties of Multi-layer Corrugated Sandwich Structures
Multi-layer corrugated sandwich structure is a favorable kind of cushioning and packaging material, but there is little reference to the selection of multi-layer corrugated sandwic...
Design aspects of steel I-girders with corrugated steel webs
Design aspects of steel I-girders with corrugated steel webs
Corrugated web girders represent a new structural system emerged in the past two decades. The girder’s flanges provide the flexural strength of the girder with no contribution from...
Cyclic Behavior of New Steel Plate Shear Walls Reinforced with Trapezoidal Corrugated Plates
Cyclic Behavior of New Steel Plate Shear Walls Reinforced with Trapezoidal Corrugated Plates
Unstiffened steel plate shear walls have low buckling strength, which caused development diagonal tension field under lateral load. Corrugated plates have higher out-of-plane stiff...
Performance improvement of large area GaN MSM photodiode with thin AlGaN surface layer
Performance improvement of large area GaN MSM photodiode with thin AlGaN surface layer
PurposeThe purpose of this paper is to propose a new structure of GaN based metal‐semiconductor‐metal (MSM) photodiode, in which a thin unintentionally doped n‐type AlGaN layer is ...
Pengaruh Media Colour Corrugated Paper (Kokoru) Terhadap Kemampuan Motorik Halus Anak di TK Mekar Sari Surabaya
Pengaruh Media Colour Corrugated Paper (Kokoru) Terhadap Kemampuan Motorik Halus Anak di TK Mekar Sari Surabaya
Fine motor skills are the ability to control fine and coordinated movements of the hands and fingers. Fine motor skills are one of the important abilities for children. Thus, if th...
STRUKTUR KOMUNITAS MANGROVE DI PULAU PEMAGARAN, KEPULAUAN SERIBU, DKI JAKARTA
STRUKTUR KOMUNITAS MANGROVE DI PULAU PEMAGARAN, KEPULAUAN SERIBU, DKI JAKARTA
Pengamatan mangrove di Pulau Pemagaran, Kepulauan Seribu mengambil lokasi stasiun pengamatan di bagian utara, timur, selatan, dan barat Pulau Pemagaran dengan substrat berupa pasir...
Case Report: Halting terminal osseous overgrowth post tibia amputation in children: a report of three cases
Case Report: Halting terminal osseous overgrowth post tibia amputation in children: a report of three cases
Terminal osseous overgrowth is a common complication after trans-diaphyseal amputation in children, leading to pain, soft tissue problems, and recurrent surgical procedures. We rep...

