Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Study on electrochemical polishing of TC4 alloy
View through CrossRef
Abstract
Using an environmentally friendly acid-alcohol system solution for electrochemical polishing of 3D printed titanium alloy, a typical U-I polarization curve was obtained, and explained the mechanism of electrochemical polishing. In this paper, the influence of electrochemical polishing factors (electrolyte temperature, polishing distance, and polishing time) on the surface roughness of Ti-6Al-4V (TC4) was studied, and optimized the process parameters to obtain a surface roughness of 0.3 μm (1 mm × 1 mm). Electrochemical polishing can reach the level of mechanical grinding and polishing, meeting the requirements for subsequent assembly and use.
Title: Study on electrochemical polishing of TC4 alloy
Description:
Abstract
Using an environmentally friendly acid-alcohol system solution for electrochemical polishing of 3D printed titanium alloy, a typical U-I polarization curve was obtained, and explained the mechanism of electrochemical polishing.
In this paper, the influence of electrochemical polishing factors (electrolyte temperature, polishing distance, and polishing time) on the surface roughness of Ti-6Al-4V (TC4) was studied, and optimized the process parameters to obtain a surface roughness of 0.
3 μm (1 mm × 1 mm).
Electrochemical polishing can reach the level of mechanical grinding and polishing, meeting the requirements for subsequent assembly and use.
Related Results
Recent Patents for Optical Component Polishing Technology
Recent Patents for Optical Component Polishing Technology
Background:
Fluid jet polishing, Airbag polishing, Magnetorheological polishing, and Ion beam polishing are all emerging polishing technologies commonly used for processing optical...
Homogeneous, Laminated, and Functionally Graded TiCp/TC4 Composites: Microstructure, Mechanical Properties, and Dynamic Impact Behavior
Homogeneous, Laminated, and Functionally Graded TiCp/TC4 Composites: Microstructure, Mechanical Properties, and Dynamic Impact Behavior
Homogeneous titanium alloys and titanium matrix composite (TMC) suffer from poor impact resistance due to their uniform microstructure, limiting their application in high‐strain‐ra...
Research and Application of Quality Control for TC4 Titanium Alloy Profile
Research and Application of Quality Control for TC4 Titanium Alloy Profile
Abstract
Through controlling from the source, TC4 titanium alloy profile ingot heating process surface protection technology and extrusion lubrication process, extru...
An optimization study of polishing efficiency of blisk and its technological parameters
An optimization study of polishing efficiency of blisk and its technological parameters
When applied to blisk blade profile polishing of aero-engines, “five-axis NC + flexible grinding head + elastic grindstone” polishing technological equipment has advantages of high...
The effect of process parameters on chemical mechanical polishing of quartz glass
The effect of process parameters on chemical mechanical polishing of quartz glass
The effects of polishing pressure, polishing speed and pH value of the polishing slurry on the chemical activity of quartz glass, the material removal rate (MRR) and surface roughn...
Microstructure Evolution and Numerical Modeling of TC4 Titanium Alloy during Ultrasonic Shot Peening Process
Microstructure Evolution and Numerical Modeling of TC4 Titanium Alloy during Ultrasonic Shot Peening Process
Ultrasonic shot peening (USP) is a surface treatment technology used in the mechanical properties strengthening of the engineering material and components during manufacturing. TC4...
Exploring the nano-polishing mechanisms of Invar
Exploring the nano-polishing mechanisms of Invar
Abstract
With the rapid development of nano-polishing technology, ultra-precise micro-nano components require tighter tolerances for the surface engineering of the Invar al...
Study on the polishing of curved pipe parts by solid liquid two phase abrasive flow
Study on the polishing of curved pipe parts by solid liquid two phase abrasive flow
In order to study the effect of abrasive flow on the polishing quality of the elbow parts, 90° elbow is used as the research object. The dynamic pressure and wall shear force of di...