Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Microstructure and properties of ZrO2 ceramic and Ti-6A-4V alloy vacuum brazed by Ti-28Ni filler metal
View through CrossRef
Reliable ceramics/metal joints have an extensive application in the aerospace and biomedical area. However, ZrO2ceramic has not been investigated systematically compared to the Si3N4and Al2O3ceramic. Therefore, successful brazing of ZrO2ceramic and Ti-6A-4V alloy was achieved by using a binary active Ti-28Ni filler metal in this paper. The effect of holding time on the microstructure of ZrO2 ceramic/filler metal interface and mechanical properties of brazed joints was investigated. The results indicated that the representative interfacial microstructure was ZrO2ceramic/Ti2O/Ni2Ti4O/Ti-rich phase/Ti2Ni+α-Ti. With the increase of holding time, the thickness of Ti-rich layer in the interface of ZrO2/Ti-6Al-4Vjoint decreased obviously due to the diffusion of Ti atoms. Substantial brittle intermetallic compounds Ti2Ni and Ni2Ti4O were formed in the joint, which were detrimental to the mechanical properties of the brazed joints. The maximum shear strength of joint was 112.7 MPa when brazed at 1060 °C for 10 min.
Agenda Wydawnicza SIMP Przeglad Spawalnictwa
Title: Microstructure and properties of ZrO2 ceramic and Ti-6A-4V alloy vacuum brazed by Ti-28Ni filler metal
Description:
Reliable ceramics/metal joints have an extensive application in the aerospace and biomedical area.
However, ZrO2ceramic has not been investigated systematically compared to the Si3N4and Al2O3ceramic.
Therefore, successful brazing of ZrO2ceramic and Ti-6A-4V alloy was achieved by using a binary active Ti-28Ni filler metal in this paper.
The effect of holding time on the microstructure of ZrO2 ceramic/filler metal interface and mechanical properties of brazed joints was investigated.
The results indicated that the representative interfacial microstructure was ZrO2ceramic/Ti2O/Ni2Ti4O/Ti-rich phase/Ti2Ni+α-Ti.
With the increase of holding time, the thickness of Ti-rich layer in the interface of ZrO2/Ti-6Al-4Vjoint decreased obviously due to the diffusion of Ti atoms.
Substantial brittle intermetallic compounds Ti2Ni and Ni2Ti4O were formed in the joint, which were detrimental to the mechanical properties of the brazed joints.
The maximum shear strength of joint was 112.
7 MPa when brazed at 1060 °C for 10 min.
Related Results
Microstructure Evolution and Brazing Mechanism of AgCuTi Alloy Vacuum Brazed Corundum–Mullite Ceramic and Mo Joint
Microstructure Evolution and Brazing Mechanism of AgCuTi Alloy Vacuum Brazed Corundum–Mullite Ceramic and Mo Joint
The corundum–mullite ceramic and Mo are successfully joined using AgCuTi filler metal via vacuum brazing. This article investigates the effects of brazing temperature and holding t...
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
ABSTRAK KARAKTERISASI Tebal Lapisan Batas Fluida Nano ZrO2 di permukaan pemanas pada Proses Konveksi Alamiah. Pendinginan sistem sangat dipengaruhi oleh proses perpindahan panas ko...
Tuning Selectivity of Maleic Anhydride Hydrogenation Reaction over Ni/Sc-Doped ZrO2 Catalysts
Tuning Selectivity of Maleic Anhydride Hydrogenation Reaction over Ni/Sc-Doped ZrO2 Catalysts
A series of Sc-doped ZrO2 supports, with Sc2O3 content in the range of 0 to 7.5% (mol/mol), were prepared using the hydrothermal method. Ni/Sc-doped ZrO2 catalysts with nickel load...
Fundamental Aspects of Filler Distribution in Paper
Fundamental Aspects of Filler Distribution in Paper
An effective and simple method for sectioning paper was developed that enabled determination of the distribution of filler in a large number of papers. Attention was concentrated o...
Physico-Chemical and Catalytic Properties of Mesoporous CuO-ZrO2 Catalysts
Physico-Chemical and Catalytic Properties of Mesoporous CuO-ZrO2 Catalysts
Mesoporous CuO-ZrO2 catalysts were prepared and calcined at 500 °C. The performance of the synthesized catalysts for benzylation of benzene using benzyl chloride was studied. The b...
Environmental Surveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) v2
Environmental Surveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) v2
EnvironmentalSurveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) This comprehensive protocol suite enables systematic environmental surveillance for avian influenza...
Vacuum Brazing of Dissimilar Joints Mo-SS with Cu-Mn-Ni Brazing Filler Metal
Vacuum Brazing of Dissimilar Joints Mo-SS with Cu-Mn-Ni Brazing Filler Metal
The complexity of joining dissimilar materials, such as molybdenum-stainless steel, is due to the difference in thermal coefficients of linear expansion and low oxidation resistanc...
Enhancing longevity and performance: The effects of ZrO2 and TaC coatings on pistons in internal combustion engines
Enhancing longevity and performance: The effects of ZrO2 and TaC coatings on pistons in internal combustion engines
Coating of pistons with ZrO2 and TaC improves their longevity and performance in internal combustion engines by enhancing the resistance to wear, heat and corrosion. In this study ...