Javascript must be enabled to continue!
Tuning Selectivity of Maleic Anhydride Hydrogenation Reaction over Ni/Sc-Doped ZrO2 Catalysts
View through CrossRef
A series of Sc-doped ZrO2 supports, with Sc2O3 content in the range of 0 to 7.5% (mol/mol), were prepared using the hydrothermal method. Ni/Sc-doped ZrO2 catalysts with nickel loading of 10% (w/w) were prepared using impregnation method, and characterized with the use of XRD, Raman, H2 temperature-programmed reduction (H2-TPR), H2 temperature-programmed desorption (H2-TPD), XPS, and in situ FT-IR techniques. The catalytic performances of Ni/Sc-doped ZrO2 catalysts in maleic anhydride hydrogenation were tested. The results showed that the introduction of Sc3+ into ZrO2 support could effectively manipulate the distribution of maleic anhydride hydrogenation products. γ-butyrolactone was the major hydrogenation product over Sc-free Ni/ZrO2 catalyst with selectivity as high as 65.8% at 210 °C and 5 MPa of H2 pressure. The Ni/Sc-doped ZrO2 catalyst, with 7.5 mol% of Sc2O3 content, selectively catalyzed maleic anhydride hydrogenation to succinic anhydride, the selectivity towards succinic anhydride was up to 97.6% under the same reaction condition. The results of the catalysts’ structure–activity relationships revealed that there was an interdependence between the surface structure of ZrO2-based support and the C=O hydrogenation performance of the ZrO2-based supported nickel catalysts. By controlling the Sc2O3 content, the surface structure of ZrO2-based support could be regulated effectively. The different surface structure of ZrO2-based supports, resulted in the different degree of interaction between the nickel species and ZrO2-based supports; furthermore, the different interaction led to the different surface oxygen vacancies electron properties of ZrO2-based supported nickel catalysts and the C=O hydrogenation activity of the catalyst. This result provides new insight into the effect of ZrO2 support on the selective hydrogenation activity of ZrO2-supported metal catalysts and contributes to the design of selective hydrogenation catalysts for other unsaturated carbonyl compounds.
Title: Tuning Selectivity of Maleic Anhydride Hydrogenation Reaction over Ni/Sc-Doped ZrO2 Catalysts
Description:
A series of Sc-doped ZrO2 supports, with Sc2O3 content in the range of 0 to 7.
5% (mol/mol), were prepared using the hydrothermal method.
Ni/Sc-doped ZrO2 catalysts with nickel loading of 10% (w/w) were prepared using impregnation method, and characterized with the use of XRD, Raman, H2 temperature-programmed reduction (H2-TPR), H2 temperature-programmed desorption (H2-TPD), XPS, and in situ FT-IR techniques.
The catalytic performances of Ni/Sc-doped ZrO2 catalysts in maleic anhydride hydrogenation were tested.
The results showed that the introduction of Sc3+ into ZrO2 support could effectively manipulate the distribution of maleic anhydride hydrogenation products.
γ-butyrolactone was the major hydrogenation product over Sc-free Ni/ZrO2 catalyst with selectivity as high as 65.
8% at 210 °C and 5 MPa of H2 pressure.
The Ni/Sc-doped ZrO2 catalyst, with 7.
5 mol% of Sc2O3 content, selectively catalyzed maleic anhydride hydrogenation to succinic anhydride, the selectivity towards succinic anhydride was up to 97.
6% under the same reaction condition.
The results of the catalysts’ structure–activity relationships revealed that there was an interdependence between the surface structure of ZrO2-based support and the C=O hydrogenation performance of the ZrO2-based supported nickel catalysts.
By controlling the Sc2O3 content, the surface structure of ZrO2-based support could be regulated effectively.
The different surface structure of ZrO2-based supports, resulted in the different degree of interaction between the nickel species and ZrO2-based supports; furthermore, the different interaction led to the different surface oxygen vacancies electron properties of ZrO2-based supported nickel catalysts and the C=O hydrogenation activity of the catalyst.
This result provides new insight into the effect of ZrO2 support on the selective hydrogenation activity of ZrO2-supported metal catalysts and contributes to the design of selective hydrogenation catalysts for other unsaturated carbonyl compounds.
Related Results
Isolation, characterization and semi-synthesis of natural products dimeric amide alkaloids
Isolation, characterization and semi-synthesis of natural products dimeric amide alkaloids
Isolation, characterization of natural products dimeric amide alkaloids from roots of the Piper chaba Hunter. The synthesis of these products using intermolecular [4+2] cycloaddit...
Physico-Chemical and Catalytic Properties of Mesoporous CuO-ZrO2 Catalysts
Physico-Chemical and Catalytic Properties of Mesoporous CuO-ZrO2 Catalysts
Mesoporous CuO-ZrO2 catalysts were prepared and calcined at 500 °C. The performance of the synthesized catalysts for benzylation of benzene using benzyl chloride was studied. The b...
HYDROGENATION TECHNOLOGY AND CHEMISTRY OF COTTONSEED OIL AND FATS
HYDROGENATION TECHNOLOGY AND CHEMISTRY OF COTTONSEED OIL AND FATS
The presented research describes the hydrogenation technology and the chemistry of vegetable oils and fats using powder and stationary catalysts. The hydrogenation technology proce...
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
ABSTRAK KARAKTERISASI Tebal Lapisan Batas Fluida Nano ZrO2 di permukaan pemanas pada Proses Konveksi Alamiah. Pendinginan sistem sangat dipengaruhi oleh proses perpindahan panas ko...
Sericin cocoon bio-compatibilizer for reactive blending of thermoplastic cassava starch
Sericin cocoon bio-compatibilizer for reactive blending of thermoplastic cassava starch
AbstractCassava starch was blended with glycerol to prepare thermoplastic starch (TPS). Thermoplastic starch was premixed with sericin (TPSS) by solution mixing and then melt-blend...
Structure–Activity–Kinetics Relationship of Ruthenium Species in Transfer Hydrogenation of Biomass-derived Levulinic Acid to γ-Valerolactone
Structure–Activity–Kinetics Relationship of Ruthenium Species in Transfer Hydrogenation of Biomass-derived Levulinic Acid to γ-Valerolactone
Catalytic transfer hydrogenation (CTH) of levulinic acid (LA) as a biomass-derived platform to γ-valerolactone (GVL) is a sustainable process towards value added fuel additives and...
Preparation of a Pd/Ni Bimetallic Catalyst and its Application in the Selective Hydrogenation of Phenol
Preparation of a Pd/Ni Bimetallic Catalyst and its Application in the Selective Hydrogenation of Phenol
At present, through the coking, gasification and liquefaction of low-rank coal such as lignite and long-flame coal in industry, many low-temperature tar samples containing a high p...
Oxide Laminates with High Strength and Work-of-Fracture
Oxide Laminates with High Strength and Work-of-Fracture
ABSTRACTSix types of oxide laminates consisting of combinations of xenotime (YPO4) with zirconia (ZrO2), monazite (LaPO4) with ZrO2, and aluminum orthophosphate (AlPO4) with alumin...

