Javascript must be enabled to continue!
Road Lights Profiling Based on Road Lighting Setting-Up and Performances
View through CrossRef
Roads and highways are the areas where road accidents commonly occurred, and the number increases during a certain period such as festive breaks. ASEAN NCAP is committed to ensuring the safety of vehicles in Southeast Asia by improving the rating systems and standards of a vehicle such as AEB and AHB. Additionally, efforts on the improvements of street/road lighting performances and facilities (profiling and design) would play an important role in safety along the road stretches since vehicle lighting are strongly correlated with visual effectiveness. Road lighting performance with low hence and low visual quality would contribute to accidents in certain road sections. Therefore, this study experimented with road lighting performance environments by using Luxmeter based on the Euro NCAP (2018) standard and guideline. A reference grid of road light measurement with a 1-meter interval was used to measure lighting performance on each distance interval. Two federal roads in Johor were picked as experiment sites, i.e. FT050 (Jalan Batu Pahat – Ayer Hitam – Kluang) and FT001 (Jalan Johor Bahru – Segamat). FT050 road is a two carriageway with a width average of 2.6 meters, 134- kilometer in length, and the lamp used most was a double arm lamp. FT001 is similar in width (2.6-meter), 992.6-kilometer in length, and used single- arm lamps. The study found that FT050’s lighting performance decreasing at each interval grid while away from the lights at the range of 38 lux to 16 lux, however, FT001's result was decreasing at mid-interval and it increases when approaching mid between the lights at 23 lux – 15 lux – 19 lux. The following study concluded that using single arm lighting systems (by turns) resulting in higher lights (lux) performances and larger (lux) distributions (coverage) on roads. Therefore, the installments of single arm lighting system (by turns) would be considered for lights performance and efficiency concerning the drivers' visibility.
Society of Automotive Engineers International - Malaysia Group
Title: Road Lights Profiling Based on Road Lighting Setting-Up and Performances
Description:
Roads and highways are the areas where road accidents commonly occurred, and the number increases during a certain period such as festive breaks.
ASEAN NCAP is committed to ensuring the safety of vehicles in Southeast Asia by improving the rating systems and standards of a vehicle such as AEB and AHB.
Additionally, efforts on the improvements of street/road lighting performances and facilities (profiling and design) would play an important role in safety along the road stretches since vehicle lighting are strongly correlated with visual effectiveness.
Road lighting performance with low hence and low visual quality would contribute to accidents in certain road sections.
Therefore, this study experimented with road lighting performance environments by using Luxmeter based on the Euro NCAP (2018) standard and guideline.
A reference grid of road light measurement with a 1-meter interval was used to measure lighting performance on each distance interval.
Two federal roads in Johor were picked as experiment sites, i.
e.
FT050 (Jalan Batu Pahat – Ayer Hitam – Kluang) and FT001 (Jalan Johor Bahru – Segamat).
FT050 road is a two carriageway with a width average of 2.
6 meters, 134- kilometer in length, and the lamp used most was a double arm lamp.
FT001 is similar in width (2.
6-meter), 992.
6-kilometer in length, and used single- arm lamps.
The study found that FT050’s lighting performance decreasing at each interval grid while away from the lights at the range of 38 lux to 16 lux, however, FT001's result was decreasing at mid-interval and it increases when approaching mid between the lights at 23 lux – 15 lux – 19 lux.
The following study concluded that using single arm lighting systems (by turns) resulting in higher lights (lux) performances and larger (lux) distributions (coverage) on roads.
Therefore, the installments of single arm lighting system (by turns) would be considered for lights performance and efficiency concerning the drivers' visibility.
.
Related Results
A COMPREHENSIVE REVIEW OF ENERGY-EFFICIENT LIGHTING TECHNOLOGIES AND TRENDS
A COMPREHENSIVE REVIEW OF ENERGY-EFFICIENT LIGHTING TECHNOLOGIES AND TRENDS
Energy-efficient lighting technologies have undergone significant advancements in recent years, driving a transformation in the lighting industry. This comprehensive review explore...
Simple Nomographs for Assessing Lighting in Urban Environments
Simple Nomographs for Assessing Lighting in Urban Environments
<p>Incorporating different technologies and lighting techniques in the illumination of structures has allowed us to portray fantastic night time vistas of our cities. However...
Evaluation of Road Lighting Level on Road User Safety (Case Study of Majalengka Ring Road Section)
Evaluation of Road Lighting Level on Road User Safety (Case Study of Majalengka Ring Road Section)
The evaluation of street lighting is a critical issue from a global traffic safety perspective. Different road lighting standards in different countries pose challenges to data com...
ANALYSIS OF TRAFFIC LIGHTING ON ROAD USERS: CASE STUDY OF SILIWANGI ROAD KADIPATEN - MAJALENGKA
ANALYSIS OF TRAFFIC LIGHTING ON ROAD USERS: CASE STUDY OF SILIWANGI ROAD KADIPATEN - MAJALENGKA
A well-lit and safe roadway is a crucial factor in ensuring the safety and comfort of road users. This research presents an in-depth analysis of traffic lighting on Jalan Siliwangi...
WAYS TO IMPROVE ENERGY EFFICIENCY IN URBAN LIGHTING
WAYS TO IMPROVE ENERGY EFFICIENCY IN URBAN LIGHTING
In this article, an analysis of street lighting networks was carried out. Important aspects in this analysis are reducing energy consumption costs, improving road safety and reduci...
Is part‐night lighting an effective measure to limit the impacts of artificial lighting on bats?
Is part‐night lighting an effective measure to limit the impacts of artificial lighting on bats?
AbstractAs light pollution is currently considered to be a major threat to biodiversity, different lighting management options are being explored to mitigate the impact of artifici...
OCCUPANTS’ PERSONALIZED PREFERENCE FOR INDOOR THERMAL AND LIGHTING ENVIRONMENT OF OFFICE BUILDINGS: A CASE STUDY BASED UTILITY FUNCTION AND BAYESIAN INFERENCE
OCCUPANTS’ PERSONALIZED PREFERENCE FOR INDOOR THERMAL AND LIGHTING ENVIRONMENT OF OFFICE BUILDINGS: A CASE STUDY BASED UTILITY FUNCTION AND BAYESIAN INFERENCE
ABSTRACT
Building thermal and lighting environment is a key concern in the construction industry. To study the personalized preferences of thermal and lighting environments...
Evaluation of Roadway High-Mast Tower Lighting
Evaluation of Roadway High-Mast Tower Lighting
This study conducted an evaluation of high-mast roadway lighting, which included a review of Illinois Department of Transportation’s high-mast lighting specification and a field ex...

