Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Fruit shells ofCamellia oleiferaAbel as natural colourants for pigment printing of cotton fabric

View through CrossRef
PurposeThe present study aims to focus on the feasibility of using an aqueous extract from the fruit shell ofCamellia oleiferaAbel as a source of natural colourant in printing-paste preparation for pigment printing of cotton fabric. The effects of pre- and post-mordanting with three common metallic mordants, that is AlK(SO4)2, CuSO4and FeSO4on colour yield and colour fastness properties are also investigated.Design/methodology/approachThe printing paste was prepared by mixing the concentratedCamellia oleiferaAbel fruit shell extract solution with commercially available synthetic thickener and binder. The fabric sample was printed with the prepared printing paste using a flat-screen printing technique. To determine the effects of pre- and post-mordanting, AlK(SO4)2, CuSO4and FeSO4mordant aqueous solutions with various concentrations were applied using the pad-dry technique. Comparisons between printing with and without mordants were evaluated in terms of colour strength (K/Svalues) and colour fastness to washing, light, crocking and perspiration.FindingsWithout the mordants, the printed fabric had a yellowish brown shade with acceptable colour fastness properties, that is fair to good wash fastness, moderate light fastness, good to very good crocking fastness and fair to good perspiration fastness. The use of mordants, especially CuSO4and FeSO4, not only enhanced colour strength but also imparted different colours to the fabric. Compared to the unmordanted fabrics, colour fastness properties were mostly comparable or improved in the mordanted fabrics depending on the type and concentration of mordants.Research limitations/implicationsAlthough in the case of CuSO4the light fastness was increased to a good to very good level, it is recommended that the final print be produced with a concentration of less than 0.125 gL−1to yield the print with the residual amount of Cu metal under the limit, that is less than 50 ppm as regulated by the Oeko-Tex®standard.Practical implicationsThe obtained prints fromCamellia oleiferaAbel fruit shell extract provided shades with satisfactory colour fastness to washing, light, crocking and perspiration. The extract fromCamellia oleiferaAbel fruit shell has the potential to be used as an alternative to synthetic dye in the textile industry.Originality/valueThe use ofCamellia oleiferaAbel fruit shells, which are considered as abundant byproducts of tea seed oil production, as natural colouring agents for pigment printing of cotton fabric has been reported for the first time. It will minimise the environmental impact of this waste and create more valuable textile products.
Title: Fruit shells ofCamellia oleiferaAbel as natural colourants for pigment printing of cotton fabric
Description:
PurposeThe present study aims to focus on the feasibility of using an aqueous extract from the fruit shell ofCamellia oleiferaAbel as a source of natural colourant in printing-paste preparation for pigment printing of cotton fabric.
The effects of pre- and post-mordanting with three common metallic mordants, that is AlK(SO4)2, CuSO4and FeSO4on colour yield and colour fastness properties are also investigated.
Design/methodology/approachThe printing paste was prepared by mixing the concentratedCamellia oleiferaAbel fruit shell extract solution with commercially available synthetic thickener and binder.
The fabric sample was printed with the prepared printing paste using a flat-screen printing technique.
To determine the effects of pre- and post-mordanting, AlK(SO4)2, CuSO4and FeSO4mordant aqueous solutions with various concentrations were applied using the pad-dry technique.
Comparisons between printing with and without mordants were evaluated in terms of colour strength (K/Svalues) and colour fastness to washing, light, crocking and perspiration.
FindingsWithout the mordants, the printed fabric had a yellowish brown shade with acceptable colour fastness properties, that is fair to good wash fastness, moderate light fastness, good to very good crocking fastness and fair to good perspiration fastness.
The use of mordants, especially CuSO4and FeSO4, not only enhanced colour strength but also imparted different colours to the fabric.
Compared to the unmordanted fabrics, colour fastness properties were mostly comparable or improved in the mordanted fabrics depending on the type and concentration of mordants.
Research limitations/implicationsAlthough in the case of CuSO4the light fastness was increased to a good to very good level, it is recommended that the final print be produced with a concentration of less than 0.
125 gL−1to yield the print with the residual amount of Cu metal under the limit, that is less than 50 ppm as regulated by the Oeko-Tex®standard.
Practical implicationsThe obtained prints fromCamellia oleiferaAbel fruit shell extract provided shades with satisfactory colour fastness to washing, light, crocking and perspiration.
The extract fromCamellia oleiferaAbel fruit shell has the potential to be used as an alternative to synthetic dye in the textile industry.
Originality/valueThe use ofCamellia oleiferaAbel fruit shells, which are considered as abundant byproducts of tea seed oil production, as natural colouring agents for pigment printing of cotton fabric has been reported for the first time.
It will minimise the environmental impact of this waste and create more valuable textile products.

Related Results

British Food Journal Volume 35 Issue 5 1933
British Food Journal Volume 35 Issue 5 1933
The Fruit Control Act, 1924, is an important one as it provides for the establishment of a Fruit Control Board, and is described as an “Act to make Provision for Control of the Fru...
DyeDactic: towards biosynthetic alternatives to artificial textile dyes
DyeDactic: towards biosynthetic alternatives to artificial textile dyes
Production and application of textile dyes using microorganisms represents an important step towards sustainable manufacturing. Although living organisms can produce numerous colou...
Pigments—the palette of organic colourants in wall paintings
Pigments—the palette of organic colourants in wall paintings
AbstractThe present contribution deals with the use of organic colourants in wall paintings, polychrome pottery and painted stone artworks, i.e. painted artworks on inorganic suppo...
A Comprehensive Review: Printing Auxiliaries and Applications in Textile Pigment Printing
A Comprehensive Review: Printing Auxiliaries and Applications in Textile Pigment Printing
Pigment printing is the most popular method of printing all over the world. More than 80% of the printed goods are based on pigment printing. In principle, all types of fibers can ...
Cotton prediction from weather parameters of different city of Pakistan using machine learning technique
Cotton prediction from weather parameters of different city of Pakistan using machine learning technique
Abstract This study seeks a distinctive and efficient machine learning system for the prediction of Cotton Production using weather parameters and climate change impact on ...
Development and reproduction of Tetranychus cinnabarinus (Acari: Tetranychiae) on transgenic insect-resistant cotton plants
Development and reproduction of Tetranychus cinnabarinus (Acari: Tetranychiae) on transgenic insect-resistant cotton plants
The effects of two insect-resistant transgenic cotton strains (transgenic Bt pest-resistant cotton Zhongkangza 5 and Lumianyan 23, transgenic Bt+CpTI pest-resistant cotton sGK958 a...
Textile Printing
Textile Printing
AbstractThe article contains sections titled:1.History2.Introduction3.Textile Printing Technology3.1.Classification3.2.Preparation of a Master Pattern for the Printing Form3.3.Reli...

Back to Top