Javascript must be enabled to continue!
Quantitative assessment of the thermal stored energy in protective clothing under low-level radiant heat exposure
View through CrossRef
In addition to direct thermal energy from a heating source, a large amount of thermal energy stored in clothing will continuously discharge to the skin after exposure. Therefore, thermal protective clothing may have a dual effect on human skin in reality. An experimental investigation was conducted to study the energy storage within 15 different combinations of clothing layers exposed to low heat fluxes ranging from 2.5 kW/m2 to 8.5 kW/m2. The energy storage process, the distribution of energy storage, and variables critically impacting energy storage, including fabric layers, air gap under clothing, thermal resistance and heat source intensity were discussed. It is demonstrated that the weight and thickness of the fabric are dominating factors affecting energy storage. For a multilayer fabric system, 36–57% of the total amount of energy is stored in the outer shell. The neighboring layer proves to be very important for the energy storage in an individual fabric. The air gap that exists between the fabric and the skin exerts an influence on the energy storage within fabric layers. In addition, a linear correlation is observed between the energy storage and the total thermal resistance of a fabric system. The research findings will be brought to researchers to better understand the mechanism and factors associated with energy storage and help develop new fabric combinations in order to minimize heat transmission to the skin.
Title: Quantitative assessment of the thermal stored energy in protective clothing under low-level radiant heat exposure
Description:
In addition to direct thermal energy from a heating source, a large amount of thermal energy stored in clothing will continuously discharge to the skin after exposure.
Therefore, thermal protective clothing may have a dual effect on human skin in reality.
An experimental investigation was conducted to study the energy storage within 15 different combinations of clothing layers exposed to low heat fluxes ranging from 2.
5 kW/m2 to 8.
5 kW/m2.
The energy storage process, the distribution of energy storage, and variables critically impacting energy storage, including fabric layers, air gap under clothing, thermal resistance and heat source intensity were discussed.
It is demonstrated that the weight and thickness of the fabric are dominating factors affecting energy storage.
For a multilayer fabric system, 36–57% of the total amount of energy is stored in the outer shell.
The neighboring layer proves to be very important for the energy storage in an individual fabric.
The air gap that exists between the fabric and the skin exerts an influence on the energy storage within fabric layers.
In addition, a linear correlation is observed between the energy storage and the total thermal resistance of a fabric system.
The research findings will be brought to researchers to better understand the mechanism and factors associated with energy storage and help develop new fabric combinations in order to minimize heat transmission to the skin.
Related Results
Analyzing stored thermal energy and thermal protective performance of clothing
Analyzing stored thermal energy and thermal protective performance of clothing
Protective clothing can store large amounts of energy when exposed to thermal (heat, flame) hazards. After exposure, the stored thermal energy discharges naturally—or may be forced...
Radiant Heat Loss versus Radiant Heat Gain in Premature Neonates under Radiant Warmers
Radiant Heat Loss versus Radiant Heat Gain in Premature Neonates under Radiant Warmers
Premature infants nursed on open radiant warmer beds are exposed to short-wavelength infrared power density distributed evenly over the bed surface. Additionally, infants’ sides ar...
Thermal protective performance of protective clothing used for low radiant heat protection
Thermal protective performance of protective clothing used for low radiant heat protection
A laboratory simulation was performed to study the thermal protective performance of fabric systems under low level thermal hazards in the range of 6.3—8.3 kW/m
...
Thermal Effects in High Compactness CEA Stack
Thermal Effects in High Compactness CEA Stack
Thermal management is a pivotal aspect of stack durability and system operability. Consequently, understanding the thermal mapping within a stack based on its operating conditions ...
Comparison of Conductive Heat Resistance and Radiant Heat Resistance with Thermal Protective Performance of Fire Fighter Protective Clothing
Comparison of Conductive Heat Resistance and Radiant Heat Resistance with Thermal Protective Performance of Fire Fighter Protective Clothing
This study was intended to support the development of new test technology and requirements for possible inclusion in the 1997 edition of NFPA 1971, Standard on Protective Ensemble ...
Thermal energy storage with tunnels in different subsurface conditions
Thermal energy storage with tunnels in different subsurface conditions
The widespread use of the underground and global climate change impact the urban subsurface temperature. Changes in the subsurface environment can affect the performance of undergr...
DTRS56-04-T-0005A Radiant Heat Attenuation by Clothing and Human Tolerance to Radiant Heat
DTRS56-04-T-0005A Radiant Heat Attenuation by Clothing and Human Tolerance to Radiant Heat
A series of tests involving the exposing mannequins clothed with normal civilian clothing to a 10 ft. x 10 ft. LNG pool fire was conducted. Both single layer clothing and double la...
Thermal Performance of Wall Systems Utilizing Radiant Barriers
Thermal Performance of Wall Systems Utilizing Radiant Barriers
Typical brick veneer wall assemblies contain an air space to provide drainage inside the wall. This air cavity results in heat transfer through the wall via conduction, convection,...

