Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Solid–Electrolyte Interphase Evolution of Carbon‐Coated Silicon Nanoparticles for Lithium‐Ion Batteries Monitored by Transmission Electron Microscopy and Impedance Spectroscopy

View through CrossRef
AbstractThe main drawbacks of silicon as the most promising anode material for lithium‐ion batteries (theoretical capacity=3572 mAh g−1) are lithiation‐induced volume changes and the continuous formation of a solid–electrolyte interphase (SEI) upon cycling. A recent strategy is to focus on the influence of coatings and composite materials. To this end, the evolution of the SEI, as well as an applied carbon coating, on nanosilicon electrodes during the first electrochemical cycles is monitored. Two specific techniques are combined: Transmission Electron Microscopy (TEM) is used to study the surface evolution of the nanoparticles on a very local scale, whereas electrochemical impedance spectroscopy (EIS) provides information on the electrode level. A TEM–EELS fingerprint signal of carbonate structures from the SEI is discovered, which can be used to differentiate between the SEI and a graphitic carbon matrix. Furthermore, the shielding effect of the carbon coating and the thickness evolution of the SEI are described.
Title: Solid–Electrolyte Interphase Evolution of Carbon‐Coated Silicon Nanoparticles for Lithium‐Ion Batteries Monitored by Transmission Electron Microscopy and Impedance Spectroscopy
Description:
AbstractThe main drawbacks of silicon as the most promising anode material for lithium‐ion batteries (theoretical capacity=3572 mAh g−1) are lithiation‐induced volume changes and the continuous formation of a solid–electrolyte interphase (SEI) upon cycling.
A recent strategy is to focus on the influence of coatings and composite materials.
To this end, the evolution of the SEI, as well as an applied carbon coating, on nanosilicon electrodes during the first electrochemical cycles is monitored.
Two specific techniques are combined: Transmission Electron Microscopy (TEM) is used to study the surface evolution of the nanoparticles on a very local scale, whereas electrochemical impedance spectroscopy (EIS) provides information on the electrode level.
A TEM–EELS fingerprint signal of carbonate structures from the SEI is discovered, which can be used to differentiate between the SEI and a graphitic carbon matrix.
Furthermore, the shielding effect of the carbon coating and the thickness evolution of the SEI are described.

Related Results

Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Higher energy density materials are being pushed by the research community to make lithium-ion batteries a better competitor to chemical fossil fuels for transport applications. Th...
A Study of Lithium Silicon Oxynitride (LiSiON) Deposited By RF Sputtering for All-Solid-State Thin Film Batteries
A Study of Lithium Silicon Oxynitride (LiSiON) Deposited By RF Sputtering for All-Solid-State Thin Film Batteries
At present, we suffer from various environmental issues such as air pollution and rapid weather change. Air pollution is usually caused by the use of fossil fuels. To overcome the ...
Study of Solid State Lithium Batteries with a Ceramic Electrolyte
Study of Solid State Lithium Batteries with a Ceramic Electrolyte
Solid state lithium batteries are considered as the next generation of batteries due to its potential higher energy density and better safety compared to Li-ion technology[1]. Oxid...
Study of Solid State Lithium Batteries with a Ceramic Electrolyte
Study of Solid State Lithium Batteries with a Ceramic Electrolyte
Solid state lithium batteries are considered as the next generation of batteries due to its potential higher energy density and better safety compared to Li-ion technology[1]. Oxid...
(Invited) Energy Storage at Ultra Low Temperatures through Electrolyte Innovation
(Invited) Energy Storage at Ultra Low Temperatures through Electrolyte Innovation
Operating rechargeable batteries at ultralow temperatures (below -40 ℃) has been essential for various applications, especially in scenarios such as defense operations, space explo...
Lithium Surface Modification for Enhanced Cycle Life and Safety of Lithium Batteries
Lithium Surface Modification for Enhanced Cycle Life and Safety of Lithium Batteries
Lithium (Li) metal is an ideal anode material for rechargeable batteries due to its extremely high theoretical specific capacity (3860 mAh/g), low density (0.59 g/cm3) and the lowe...
Investigation on the Anode Surface of High Specific Energy Li-Ion Batteries
Investigation on the Anode Surface of High Specific Energy Li-Ion Batteries
Lithium-ion batteries have become the most popular secondary battery of electric cars, electronic products and power grids with high specific energy and cycle life. Currently, the ...

Back to Top