Javascript must be enabled to continue!
Applying covariance analysis to determine the factor influence on the control parameter in colorimetric study
View through CrossRef
The paper considers solutions to a scientific and practical problem of applying covariance analysis to determine the factor influence on the functional transformation of the control parameter in colorimetric study. The study implies determining the factor influence on the additive and multiplicative components of the measurement error of the colorimetric control parameter to assess the validity of conclusions about the factor influence on the transformation of the control parameter. The limitations on the number of basic levels (control parameters) and the factors influencing the result of colorimetric control are determined. During the study, the equations to assess the validity of statistical conclusions about the informational significance of the colorimetric control indicators for a simplified model of cross-classification were obtained.
The need for the study is due to the fact that in colorimetric control of cereal grains, the measurement uncertainty of the results of measuring the values of the controlled indicators at given levels of the control parameter is quite high.
In modern industry, colorimetry has a number of advantages over other methods, such as weight analysis. Colorimetric determinations are performed much faster. In the case of weight analysis, the chemical reaction is at the beginning of the determination followed by a series of long operations, while in the case of colorimetry, the colors are compared immediately after the chemical reaction. Therefore, the colorimetric method belongs to the methods of express control.
The main task of colorimetric express control (in our case) is to determine the quality of cereal grains. The task is important and relevant because grain, namely flour, is the main ingredient of many foods, e.g. bread, pasta, pastries, and cookies. Quality products can be obtained only from quality raw materials. Thus, at present time, it is relevant to determine the quality of cereal grains, and flour as the derived product, in Ukraine.
National Scientific Centre Institute of Metrology
Title: Applying covariance analysis to determine the factor influence on the control parameter in colorimetric study
Description:
The paper considers solutions to a scientific and practical problem of applying covariance analysis to determine the factor influence on the functional transformation of the control parameter in colorimetric study.
The study implies determining the factor influence on the additive and multiplicative components of the measurement error of the colorimetric control parameter to assess the validity of conclusions about the factor influence on the transformation of the control parameter.
The limitations on the number of basic levels (control parameters) and the factors influencing the result of colorimetric control are determined.
During the study, the equations to assess the validity of statistical conclusions about the informational significance of the colorimetric control indicators for a simplified model of cross-classification were obtained.
The need for the study is due to the fact that in colorimetric control of cereal grains, the measurement uncertainty of the results of measuring the values of the controlled indicators at given levels of the control parameter is quite high.
In modern industry, colorimetry has a number of advantages over other methods, such as weight analysis.
Colorimetric determinations are performed much faster.
In the case of weight analysis, the chemical reaction is at the beginning of the determination followed by a series of long operations, while in the case of colorimetry, the colors are compared immediately after the chemical reaction.
Therefore, the colorimetric method belongs to the methods of express control.
The main task of colorimetric express control (in our case) is to determine the quality of cereal grains.
The task is important and relevant because grain, namely flour, is the main ingredient of many foods, e.
g.
bread, pasta, pastries, and cookies.
Quality products can be obtained only from quality raw materials.
Thus, at present time, it is relevant to determine the quality of cereal grains, and flour as the derived product, in Ukraine.
Related Results
Low-cost eddy covariance: a case study of evapotranspiration over agroforestry in Germany
Low-cost eddy covariance: a case study of evapotranspiration over agroforestry in Germany
Abstract. Eddy covariance has evolved as the method of choice for measurements of the ecosystem-atmosphere exchange of water vapour, sensible heat and trace gases. Under ideal cond...
KEDUDUKAN AHLI BAHASA DALAM PEMBUKTIAN PERKARA PENCEMARAN NAMA BAIK (STUDI PUTUSAN NOMOR: 47/PID.SUS/2019/PN. MGT)
KEDUDUKAN AHLI BAHASA DALAM PEMBUKTIAN PERKARA PENCEMARAN NAMA BAIK (STUDI PUTUSAN NOMOR: 47/PID.SUS/2019/PN. MGT)
<em><span id="page3R_mcid52" class="markedContent"><span style="left: calc(var(--scale-factor)*125.30px); top: calc(var(--scale-factor)*539.11px); font-size: calc(va...
Frequency of Common Chromosomal Abnormalities in Patients with Idiopathic Acquired Aplastic Anemia
Frequency of Common Chromosomal Abnormalities in Patients with Idiopathic Acquired Aplastic Anemia
Objective: To determine the frequency of common chromosomal aberrations in local population idiopathic determine the frequency of common chromosomal aberrations in local population...
Euclid: Covariance of weak lensing pseudo-Cℓ estimates
Euclid: Covariance of weak lensing pseudo-Cℓ estimates
An accurate covariance matrix is essential for obtaining reliable cosmological results when using a Gaussian likelihood. In this paper we study the covariance of pseudo-Cℓ estimate...
Dispersion analysis in colorimetric control
Dispersion analysis in colorimetric control
In the paper, solutions to the scientific and practical task of applying covariance analysis to determine the factor influence on the functional transformation of the control param...
Nonlinear optimal control for robotic exoskeletons with electropneumatic actuators
Nonlinear optimal control for robotic exoskeletons with electropneumatic actuators
Purpose
To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of...
Algorithmes d’estimation et de détection en contexte hétérogène rang faible
Algorithmes d’estimation et de détection en contexte hétérogène rang faible
Une des finalités du traitement d’antenne est la détection et la localisation de cibles en milieu bruité. Dans la plupart des cas pratiques, comme par exemple le RADAR ou le SONAR ...
ANALISIS KETERKAITAN KEKERASAN DENGAN PERBUATAN CABUL TERHADAP ANAK
ANALISIS KETERKAITAN KEKERASAN DENGAN PERBUATAN CABUL TERHADAP ANAK
<span id="page3R_mcid85" class="markedContent"><em><span style="left: calc(var(--scale-factor)*85.10px); top: calc(var(--scale-factor)*399.05px); font-size: calc(var...

