Wind energy

A wind turbine or even a wind farm, i.e. a group of wind turbines, is becoming an increasingly familiar sight in the countryside today. The wind turbine converts the power in the wind to electrical power and consists of a tower, rotor, typically with three blades as in Fig. 5.1, and a nacelle containing the power converter. From its rebirth in the early 1980s, wind power has experienced a dramatic development. Today, other than hydropower, it is the most important of the renewable sources of power. With an installed capacity equivalent to that required to provide electricity for over 19,000,000 average European homes and annual turnover greater than £5,500,000,000, wind energy has exceeded its year-on-year targets over the last decade. This growth in the contribution to electricity generation from wind power in Europe is likely to continue over the next few years, since the EU Commission has set a European target for 2010 of 12% of electricity generation from renewable sources. In the long term, the achievable limit to the contribution of wind power is estimated to be30%of the total European demand, an amount almost equal to the installed nuclear capacity. In the UK, wind power is the fastest growing energy sector. Over 4,000 people are employed by companies working in the wind sector , and it is estimated by the UK Department of Trade and Industry (DTI) that the next round of offshore wind development could generate a further 20,000 jobs. In a 2003 Energy White Paper, the UK government aspired to achieving a 60% reduction in UK CO2 emissions by 2050. In order to do so, it has set targets for UK electricity generation from renewable sources of 10% of electricity demand by 2010 and20% by 2015. Since it is the most mature of the renewable energies, much of these near term targets must be met by wind power . Irrespective of whether these targets are achieved, the potential for increase in the UK is substantial. The prospects for wind power development in the UK are dependent on the available wind resource, public acceptance, and technical development. Each of these issues is discussed below.