Javascript must be enabled to continue!
Graben inversion in nature and experiments
View through CrossRef
The inversion of crustal‐scale basement grabens is studied here through laboratory experiments on small‐scale models and available oil industry seismic lines from the southern North Sea. Two basic configurations are considered. First, both the basement and the sedimentary cover are brittle, and inversion does not involve any potential décollement between them. Second, the basement and sedimentary cover are separated by a weak ductile layer (e.g., salt), which can allow décollement of the cover during both extension and later compression and inversion. The second configuration is more complicated and can lead to a large variety of geological structures. Laboratory experiments were carried out on brittle‐ductile models built with sand to represent brittle layers (basement and sedimentary cover) and silicone putty to simulate the décollement layer between basement and cover. A mechanically based classification of inversion structures is proposed. The effects of some crucial parameters are investigated, including obliquity between the direction of shortening and normal faults, as well as strength profiles, and the presence or absence of salt diapirs. The experimental investigation leads to the following conclusions: (1) the inversion of the graben by reactivation of normal faults implies that the angle between the direction of compression and the graben is less than 45°, (2) if there is a superficial décollement (e.g., basement‐cover interface), inversion initiates low dipping thrust faults in the cover, localized at graben borders, (3) salt diapirs or salt walls localized along the graben borders in the cover are preferential sites for the development of thrust faults, and (4) when the cover is decoupled from the basement by a décollement layer, inversion induced deformation in the cover which is partitioned between thrust faults along the graben borders and strike‐slip faults within the graben trending oblique to the graben borders. Experimental results are compared with field examples, in particular from the southern North Sea.
Title: Graben inversion in nature and experiments
Description:
The inversion of crustal‐scale basement grabens is studied here through laboratory experiments on small‐scale models and available oil industry seismic lines from the southern North Sea.
Two basic configurations are considered.
First, both the basement and the sedimentary cover are brittle, and inversion does not involve any potential décollement between them.
Second, the basement and sedimentary cover are separated by a weak ductile layer (e.
g.
, salt), which can allow décollement of the cover during both extension and later compression and inversion.
The second configuration is more complicated and can lead to a large variety of geological structures.
Laboratory experiments were carried out on brittle‐ductile models built with sand to represent brittle layers (basement and sedimentary cover) and silicone putty to simulate the décollement layer between basement and cover.
A mechanically based classification of inversion structures is proposed.
The effects of some crucial parameters are investigated, including obliquity between the direction of shortening and normal faults, as well as strength profiles, and the presence or absence of salt diapirs.
The experimental investigation leads to the following conclusions: (1) the inversion of the graben by reactivation of normal faults implies that the angle between the direction of compression and the graben is less than 45°, (2) if there is a superficial décollement (e.
g.
, basement‐cover interface), inversion initiates low dipping thrust faults in the cover, localized at graben borders, (3) salt diapirs or salt walls localized along the graben borders in the cover are preferential sites for the development of thrust faults, and (4) when the cover is decoupled from the basement by a décollement layer, inversion induced deformation in the cover which is partitioned between thrust faults along the graben borders and strike‐slip faults within the graben trending oblique to the graben borders.
Experimental results are compared with field examples, in particular from the southern North Sea.
Related Results
Two mechanisms of graben nucleation above dikes based on elastic and frictional models applied at three locations in the Elysium Rise, Mars
Two mechanisms of graben nucleation above dikes based on elastic and frictional models applied at three locations in the Elysium Rise, Mars
<p><strong>Introduction</strong></p>
<p>We modeled the sequence of discontinuities forming in the subsurface d...
Late Cenozoic Sedimentary Evolution of Pagri‐Duoqing Co graben, Southern End of Yadong‐Gulu Rift, Southern Tibet
Late Cenozoic Sedimentary Evolution of Pagri‐Duoqing Co graben, Southern End of Yadong‐Gulu Rift, Southern Tibet
The north trending rifts in southern Tibet represent the E–W extension of the plateau and confirming the initial rifting age is key to the study of mechanics of these rifts. Pagri–...
Inversion Using Adaptive Physics-Based Neural Network: Application to Magnetotelluric Inversion
Inversion Using Adaptive Physics-Based Neural Network: Application to Magnetotelluric Inversion
Abstract
In order to develop a geophysical earth model that is consistent with the measured geophysical data, two types of inversions are commonly used: a physics-ba...
Organic Geochemical Characteristic Of Crude Oils From Orange Graben, South Sumatra Basin
Organic Geochemical Characteristic Of Crude Oils From Orange Graben, South Sumatra Basin
Lemat Formation in the Orange Graben in the South Sumatra basin has been considered as syn-rift sediments consist of fluvio-lacustrine sediments, create source rock with fluvio-lac...
Plio-Quaternary Movement of the East Arabian Block
Plio-Quaternary Movement of the East Arabian Block
ABSTRACTNew data presented herein support the previously suggested existence of an East Arabian Tectonic Block in Saudi Arabia. However, the East Arabian Tectonic Block is not excl...
Stochastic Rock Physics Inversion
Stochastic Rock Physics Inversion
Abstract
The purpose of this paper is to introduce a stochastic seismic inversion algorithm based on Markov Chain Monte Carlo Simulation. The suggested inversion ...
Application of actuator dynamics inversion techniques to active vibration control systems and shake table testing
Application of actuator dynamics inversion techniques to active vibration control systems and shake table testing
Excessive vibrations problems usually arise in lightweight structures subjected to human actions. The active vibration absorber constitutes an effective solution to mitigate these ...
The Role of Gravity Waves in the Mesosphere Inversion Layers (MILs) over low-latitude (3–15° N) Using SABER Satellite Observations
The Role of Gravity Waves in the Mesosphere Inversion Layers (MILs) over low-latitude (3–15° N) Using SABER Satellite Observations
Abstract. The Mesosphere transitional region over low latitude is a distinct and highly turbulent zone of the atmosphere. A transition MLT region is connected with dynamic processe...

