Javascript must be enabled to continue!
The Abrasion Resistance of Various Types of Porcelain Enamel
View through CrossRef
The abrasion resistance of porcelain enamels is a property that has considerable significance to the users of protective finishes for metals. Since it is necessary to select the most suitable porcelain enamel for a specific application, it is desirable to know which type of enamel has the necessary abrasion resistance, whenever abrasion resistance is a property to be considered. In this study the types of enamels selected were those that have been employed on household appliances fabricated from sheet steel. Of the several recognized methods for measuring abrasion, the Taber abraser has probably received the greatest popularity because of its availability and ease of operation. This instrument was used to measure the abrasion resistance of the several types of porcelain enamels selected. The data obtained with this equipment under the conditions specified is relative within itself; it might be erroneous to compare it with that obtained, for example, on painted samples where the density of material and other factors are different.
ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
Title: The Abrasion Resistance of Various Types of Porcelain Enamel
Description:
The abrasion resistance of porcelain enamels is a property that has considerable significance to the users of protective finishes for metals.
Since it is necessary to select the most suitable porcelain enamel for a specific application, it is desirable to know which type of enamel has the necessary abrasion resistance, whenever abrasion resistance is a property to be considered.
In this study the types of enamels selected were those that have been employed on household appliances fabricated from sheet steel.
Of the several recognized methods for measuring abrasion, the Taber abraser has probably received the greatest popularity because of its availability and ease of operation.
This instrument was used to measure the abrasion resistance of the several types of porcelain enamels selected.
The data obtained with this equipment under the conditions specified is relative within itself; it might be erroneous to compare it with that obtained, for example, on painted samples where the density of material and other factors are different.
Related Results
Abrasion Behaviors of Silica-Reinforced Solution Styrene–Butadiene Rubber Compounds Using Different Abrasion Testers
Abrasion Behaviors of Silica-Reinforced Solution Styrene–Butadiene Rubber Compounds Using Different Abrasion Testers
Solution styrene–butadiene rubber (SSBR) is widely used to improve the properties of tire tread compounds. Tire wear particles (TWPs), which are generated on real roads as vehicles...
Posteruptive Loss of Enamel Proteins Concurs with Gain in Enamel Hardness
Posteruptive Loss of Enamel Proteins Concurs with Gain in Enamel Hardness
ABSTRACT
Tooth enamel maturation requires the removal of proteins from the mineralizing enamel matrix to allow for crystallite growth until full hardness is reached...
The Resistance of Porcelain Enamels to Surface Abrasion as Determined by the PEI Test
The Resistance of Porcelain Enamels to Surface Abrasion as Determined by the PEI Test
Porcelain enamels by virtue of their hardness have good abrasion resistance; yet this fact is not generally recognized for two reasons. In the first place, the term abrasion has ma...
Power Transmission—Slippage-Abrasion. An Investigation of the Abrasion of Tread Compounds
Power Transmission—Slippage-Abrasion. An Investigation of the Abrasion of Tread Compounds
Abstract
The abrasion behavior of vulcanizates of the tire-tread type have been studied by the method of constant energy, with a test apparatus operating on the principle o...
Abrasion Tests for Railroad Ballast
Abrasion Tests for Railroad Ballast
Abstract
Mechanical abrasion tests are an important basis for evaluating the suitability of rock for use as railroad ballast. This paper considers three such tests: ...
On thick and thin enamel in hominoids
On thick and thin enamel in hominoids
AbstractMartin (1983, 1985) reviewed the significance of enamel thickness in hominoid evolution. He studied cut faces of hominoid teeth using the scanning electron microscope and r...
Evolution of Antimicrobial Resistance in Community vs. Hospital-Acquired Infections
Evolution of Antimicrobial Resistance in Community vs. Hospital-Acquired Infections
Abstract
Introduction
Hospitals are high-risk environments for infections. Despite the global recognition of these pathogens, few studies compare microorganisms from community-acqu...
Abrasion Disaster Profile, Impact And Abrasion Mitigation Efforts In East Java Province
Abrasion Disaster Profile, Impact And Abrasion Mitigation Efforts In East Java Province
Climate change causes sea waves to become stronger and affect coastlines due to abrasion. Abrasion is when local sea levels rise and drive strong waves that erode or wash away rock...

