Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Abrasion Tests for Railroad Ballast

View through CrossRef
Abstract Mechanical abrasion tests are an important basis for evaluating the suitability of rock for use as railroad ballast. This paper considers three such tests: Los Angeles abrasion, the test primarily used by North American railroads; Deval abrasion, the test primarily used by British Rail; and mill abrasion, a relatively new test being proposed for use in North America. The mill abrasion test is similar to the Deval test. Previous evaluations of the Deval and mill abrasion tests are summarized. Then test data generated by the authors are presented to show the effect of factors influencing the mill abrasion test results. Finally, mill and Los Angeles abrasion results obtained on a wide range of rock type are compared and evaluated using petrographic analysis. Ranking of rock type by the mill test is different than by the Los Angeles test. The products of abrasion are quite different, too—the mill test primarily produces particles smaller than the No. 200 sieve, while the Los Angeles test primarily produces particles larger than the No. 200 sieve. Thus these two tests appear to be influenced by different rock structural characteristics. In the mill and Deval tests, the amount of abrasion increases with increasing particle size. Also, the amount of abrasion is significantly greater for freshly crushed particles than for worn particles. In the mill test the abrasion is significantly greater when the test is conducted wet than when conducted dry. The petrographic analysis was useful in explaining the differences in results for the various rock type.
Title: Abrasion Tests for Railroad Ballast
Description:
Abstract Mechanical abrasion tests are an important basis for evaluating the suitability of rock for use as railroad ballast.
This paper considers three such tests: Los Angeles abrasion, the test primarily used by North American railroads; Deval abrasion, the test primarily used by British Rail; and mill abrasion, a relatively new test being proposed for use in North America.
The mill abrasion test is similar to the Deval test.
Previous evaluations of the Deval and mill abrasion tests are summarized.
Then test data generated by the authors are presented to show the effect of factors influencing the mill abrasion test results.
Finally, mill and Los Angeles abrasion results obtained on a wide range of rock type are compared and evaluated using petrographic analysis.
Ranking of rock type by the mill test is different than by the Los Angeles test.
The products of abrasion are quite different, too—the mill test primarily produces particles smaller than the No.
200 sieve, while the Los Angeles test primarily produces particles larger than the No.
200 sieve.
Thus these two tests appear to be influenced by different rock structural characteristics.
In the mill and Deval tests, the amount of abrasion increases with increasing particle size.
Also, the amount of abrasion is significantly greater for freshly crushed particles than for worn particles.
In the mill test the abrasion is significantly greater when the test is conducted wet than when conducted dry.
The petrographic analysis was useful in explaining the differences in results for the various rock type.

Related Results

Abrasion Behaviors of Silica-Reinforced Solution Styrene–Butadiene Rubber Compounds Using Different Abrasion Testers
Abrasion Behaviors of Silica-Reinforced Solution Styrene–Butadiene Rubber Compounds Using Different Abrasion Testers
Solution styrene–butadiene rubber (SSBR) is widely used to improve the properties of tire tread compounds. Tire wear particles (TWPs), which are generated on real roads as vehicles...
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
Ballast is a commonly used solution to ensure the stability and balance of ships during voyages. The volume of ballast water that is circulated by ships between different seas is e...
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Bio-invasion caused due to ballast water discharge is one of many problems in marine pollution. Countries such as Canada, Brazil, USA and Australia recognized the problems associat...
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Global coastal aquatic ecosystems are negatively impacted by the introduction of harmful aquatic species through the discharge of ships’ ballast water. To reduce discharges of harm...
Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study
Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study
In ballasted concrete tie track, the tie-ballast interface can deteriorate resulting in concrete tie bottom abrasion, ballast pulverization and/or voids in tie-ballast interfaces. ...
Comparative Evaluation of Railway Ballast Degradation
Comparative Evaluation of Railway Ballast Degradation
Ballast bed is one of the most important components of ballasted railway track system. Over a period of service, it undergoes axial deformation due to the accumulation of train cyc...
Power Transmission—Slippage-Abrasion. An Investigation of the Abrasion of Tread Compounds
Power Transmission—Slippage-Abrasion. An Investigation of the Abrasion of Tread Compounds
Abstract The abrasion behavior of vulcanizates of the tire-tread type have been studied by the method of constant energy, with a test apparatus operating on the principle o...
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
This study evaluates the mechanical behavior of railway ballast under severe transient loading, using a laboratory drop weight impact test to simulate the effects of high-magnitude...

Back to Top