Javascript must be enabled to continue!
Comparative Evaluation of Railway Ballast Degradation
View through CrossRef
Ballast bed is one of the most important components of ballasted railway track system. Over a period of service, it undergoes axial deformation due to the accumulation of train cyclic loading. However, there has not been a universally accepted method of evaluating ballast degradation, hence, this study focused on comparing two most common methods namely; Marsal breakage ratio and fouling index (FI). The degraded ballast material was prepared using Los Angeles abrasion (LAA) method at an interval of 250 turns of the LAA test drum, from the fresh ballast to degraded ballast at 2000 turns of the LAA test drum. Series of sieve analysis were conducted and the changes in ballast gradations were evaluated. A strong correlation was observed between the results obtained using the two approaches with a coefficient of determination of 99.24%. Based on the results obtained from the ballast degradation analysis both Marsal’s breakage ratio and the fouling index can be used for the evaluation of ballast degradation. However, Marsal’s breakage index is recommended due to its ability to give the breakdown of the particle size variations. Keywords: Ballast degradation; fouling; Los Angeles Abrasion; gradations; breakage ratio
Faculty of Engineering, Federal University Oye-Ekiti
Title: Comparative Evaluation of Railway Ballast Degradation
Description:
Ballast bed is one of the most important components of ballasted railway track system.
Over a period of service, it undergoes axial deformation due to the accumulation of train cyclic loading.
However, there has not been a universally accepted method of evaluating ballast degradation, hence, this study focused on comparing two most common methods namely; Marsal breakage ratio and fouling index (FI).
The degraded ballast material was prepared using Los Angeles abrasion (LAA) method at an interval of 250 turns of the LAA test drum, from the fresh ballast to degraded ballast at 2000 turns of the LAA test drum.
Series of sieve analysis were conducted and the changes in ballast gradations were evaluated.
A strong correlation was observed between the results obtained using the two approaches with a coefficient of determination of 99.
24%.
Based on the results obtained from the ballast degradation analysis both Marsal’s breakage ratio and the fouling index can be used for the evaluation of ballast degradation.
However, Marsal’s breakage index is recommended due to its ability to give the breakdown of the particle size variations.
Keywords: Ballast degradation; fouling; Los Angeles Abrasion; gradations; breakage ratio .
Related Results
Primerjalna književnost na prelomu tisočletja
Primerjalna književnost na prelomu tisočletja
In a comprehensive and at times critical manner, this volume seeks to shed light on the development of events in Western (i.e., European and North American) comparative literature ...
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
A STUDY OF SHIP BALLAST WATER TREATMENT TECHNOLOGIES AND TECHNIQUES
Ballast is a commonly used solution to ensure the stability and balance of ships during voyages. The volume of ballast water that is circulated by ships between different seas is e...
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Systems and Operation of Ballast Water in Ships with the Changing Ballast Water Management Policy
Bio-invasion caused due to ballast water discharge is one of many problems in marine pollution. Countries such as Canada, Brazil, USA and Australia recognized the problems associat...
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Do Ballast Water Management Systems Reduce Phytoplankton Introductions to Canadian Waters?
Global coastal aquatic ecosystems are negatively impacted by the introduction of harmful aquatic species through the discharge of ships’ ballast water. To reduce discharges of harm...
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
Evaluating Different Track Sub-Ballast Solutions Considering Traffic Loads and Sustainability
The railway industry is seeking high-performance and sustainable solutions for sub-ballast materials, particularly in light of increasing cargo transport demands and climate events...
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
INFLUENCE OF TRAIN AXLE LOAD ON MECHANICAL BEHAVIOR OF FOULED BALLAST
This study evaluates the mechanical behavior of railway ballast under severe transient loading, using a laboratory drop weight impact test to simulate the effects of high-magnitude...
Forecasting Track Geometry Degradation Using GPR Based Ballast Condition
Forecasting Track Geometry Degradation Using GPR Based Ballast Condition
Abstract
The ability to predict track geometry degradation is of critical importance in planning of track maintenance operations. This paper presents results of an F...
Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
Protocol for Testing Fouled Railway Ballast in Large-Scale Cyclic Triaxial Equipment
Abstract
A testing protocol was developed to measure accumulation of vertical plastic deformation in fouled railway ballast under cyclic traffic loading. Large-scale...

