Javascript must be enabled to continue!
The Application of PIV in the Study of Impeller-Diffuser Interaction in Centrifugal Fan: Part I — Impeller-Vaneless Diffuser Interaction
View through CrossRef
Abstract
The PIV (Particle Image Velocimetry) technology is a brand-new technique of measuring velocity. It started in the 1980’s with the development of high-speed photography and the image processing technique of computers. This article deals with PIV applied to the study of unsteady impeller-vaneless diffuser interaction in centrifugal fen. Experiments were carried out at The Turbomachinery Laboratory of Shanghai Jiaotong University. The test rig consists of a centrifugal, shrouded impeller, diffuser and volute casing all made of plexiglass. A series of performance measurements were carried out at different speeds and different vaneless diffuser widths. PIV measurements were applied to measure the unsteady flow at the exit part of the impeller and the inlet part of the diffuser for the case of the same width vaneless diffuser. The absolute flow field is measured at medium flow rate and at maximum flow rate. It is informative to capture the whole flow field at the same instant of time, and it might be more revealing to observe the unstable flow in real time.
American Society of Mechanical Engineers
Title: The Application of PIV in the Study of Impeller-Diffuser Interaction in Centrifugal Fan: Part I — Impeller-Vaneless Diffuser Interaction
Description:
Abstract
The PIV (Particle Image Velocimetry) technology is a brand-new technique of measuring velocity.
It started in the 1980’s with the development of high-speed photography and the image processing technique of computers.
This article deals with PIV applied to the study of unsteady impeller-vaneless diffuser interaction in centrifugal fen.
Experiments were carried out at The Turbomachinery Laboratory of Shanghai Jiaotong University.
The test rig consists of a centrifugal, shrouded impeller, diffuser and volute casing all made of plexiglass.
A series of performance measurements were carried out at different speeds and different vaneless diffuser widths.
PIV measurements were applied to measure the unsteady flow at the exit part of the impeller and the inlet part of the diffuser for the case of the same width vaneless diffuser.
The absolute flow field is measured at medium flow rate and at maximum flow rate.
It is informative to capture the whole flow field at the same instant of time, and it might be more revealing to observe the unstable flow in real time.
Related Results
The Application of PIV in the Study of Impeller-Diffuser Interaction in Centrifugal Fan: Part II — Impeller-Vaned Diffuser Interaction
The Application of PIV in the Study of Impeller-Diffuser Interaction in Centrifugal Fan: Part II — Impeller-Vaned Diffuser Interaction
Abstract
The real flow inside a turbomachinery passage is unsteady and strongly affected by wakes between stator and rotor. The aim of this study was to help our und...
Prospective Study of Incidence and Predictors of Peripheral IV Catheter–Induced Complications
Prospective Study of Incidence and Predictors of Peripheral IV Catheter–Induced Complications
BackgroundPeripheral intravenous catheters (PIVs) are invasive catheters that may endure risks of clinical complications affecting health care outcomes and patient satisfaction. Pa...
Design Method and Numerical Simulation Analysis of Special-Shaped Centrifugal Impeller: Part I — Design Method
Design Method and Numerical Simulation Analysis of Special-Shaped Centrifugal Impeller: Part I — Design Method
Abstract
This paper presents the design method of the special-shaped centrifugal impeller based on the streamline curvature method. Some conclusions described in thi...
CFD investigation of flow through a centrifugal compressor diffuser with splitter blades
CFD investigation of flow through a centrifugal compressor diffuser with splitter blades
AbstractThe aerodynamic losses in centrifugal compressors are mainly associated with the separated flow on the suction sides of impeller and diffuser vanes. The overall performance...
Investigation on Clocking Effect of Diffuser in a Multi-Stage Centrifugal Pump
Investigation on Clocking Effect of Diffuser in a Multi-Stage Centrifugal Pump
Abstract
The clocking effect is an important phenomenon in the multi-stage Rotating machinery. In order to master the rules and mechanism of diffuser clocking effect on the...
Flow Studies in a Centrifugal Compressor Stage
Flow Studies in a Centrifugal Compressor Stage
The overall efficiency of a compressor is dependent on the design of both the impeller and the diffuser. The vaned diffuser reduces the operating range compared to the vaneless dif...
Flow Measurements Behind the Inlet Guide Vane of a Centrifugal Compressor
Flow Measurements Behind the Inlet Guide Vane of a Centrifugal Compressor
In a centrifugal compressor adjustable inlet guide vanes (IGV) in front of the impeller are used to regulate the pressure ratio and the mass flow. The stationary measurement of the...
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Abstract
Flow instability is a common unsteady phenomenon in the field of turbomachinery that often causes large pressure fluctuations, performance penalties, and st...

