Javascript must be enabled to continue!
Application of microturbines in improving the energy efficiency of municipal wastewater treatment plants in Missouri.
View through CrossRef
Hydropower is a source of renewable energy. It is possible to combine a hydropower installation with an existing wastewater plant while ensuring it still performs its basic purpose. The multipurpose scheme would be integrated into the facility to generate hydropower while also fulfilling its primary role of treating wastewater. The wastewater plant can generate renewable energy and benefit from introducing microturbines. The turbine system is moved by the power in the flowing treated water that is transformed into mechanical energy which rotates the generator and in turn generates electrical power. In this work, the potential for power generation from the energy in the outflow along with the economics of the system in wastewater plants in the state of Missouri was investigated to improve the energy efficiency of the municipal wastewater treatment plants. Data like the daily flow rate, speed of flow, available head, etc about the wastewater plants in Missouri were collected and some interviews held with plant managers of the wastewater treatment plants. The investigation revealed that there are 127 wastewater treatment plants in the state of Missouri with 32 plants discharging less than 1 Mgd, 74 plants discharging between 1 Mgd and 5 Mgd, 13 plants discharging between 5 Mgd and 20 Mgd while just 8 plants had an outflow between 20 Mgd and 120 Mgd range. The flowrate helps in calculating and determining the theoretical and actual amount of power that can be gotten from the micro hydropower system in the wastewater treatment plant. For the actual amount of power gotten, the efficiency factor (efficiency of the turbine, and efficiency of the generator) of the generating system is considered. A brief study on the turbine system was conducted and a crossflow turbine was selected as the most suitable for the wastewater treatment plant as a vast majority of them had low head and high flow capacity. The analysis showed that out of the 127 wastewater treatment plants in the state of Missouri, only 21 treatment plants have the maximum potential to generate power and reduce operating costs. Also, two plants were selected for case studies. The operating cost is reduced because of the decrease in demand for electrical power from the grid. The 21 treatment plants have a daily outflow between 5Mgd to 120Mgd and could produce power through an axial flow turbine that utilizes the kinetic energy in the flow volume.
Title: Application of microturbines in improving the energy efficiency of municipal wastewater treatment plants in Missouri.
Description:
Hydropower is a source of renewable energy.
It is possible to combine a hydropower installation with an existing wastewater plant while ensuring it still performs its basic purpose.
The multipurpose scheme would be integrated into the facility to generate hydropower while also fulfilling its primary role of treating wastewater.
The wastewater plant can generate renewable energy and benefit from introducing microturbines.
The turbine system is moved by the power in the flowing treated water that is transformed into mechanical energy which rotates the generator and in turn generates electrical power.
In this work, the potential for power generation from the energy in the outflow along with the economics of the system in wastewater plants in the state of Missouri was investigated to improve the energy efficiency of the municipal wastewater treatment plants.
Data like the daily flow rate, speed of flow, available head, etc about the wastewater plants in Missouri were collected and some interviews held with plant managers of the wastewater treatment plants.
The investigation revealed that there are 127 wastewater treatment plants in the state of Missouri with 32 plants discharging less than 1 Mgd, 74 plants discharging between 1 Mgd and 5 Mgd, 13 plants discharging between 5 Mgd and 20 Mgd while just 8 plants had an outflow between 20 Mgd and 120 Mgd range.
The flowrate helps in calculating and determining the theoretical and actual amount of power that can be gotten from the micro hydropower system in the wastewater treatment plant.
For the actual amount of power gotten, the efficiency factor (efficiency of the turbine, and efficiency of the generator) of the generating system is considered.
A brief study on the turbine system was conducted and a crossflow turbine was selected as the most suitable for the wastewater treatment plant as a vast majority of them had low head and high flow capacity.
The analysis showed that out of the 127 wastewater treatment plants in the state of Missouri, only 21 treatment plants have the maximum potential to generate power and reduce operating costs.
Also, two plants were selected for case studies.
The operating cost is reduced because of the decrease in demand for electrical power from the grid.
The 21 treatment plants have a daily outflow between 5Mgd to 120Mgd and could produce power through an axial flow turbine that utilizes the kinetic energy in the flow volume.
Related Results
Case Studies of Distributed Generation Projects With Microturbines in Brazil
Case Studies of Distributed Generation Projects With Microturbines in Brazil
Microturbines have showed good perspectives for the distributed generation of the electricity in low capacity range, because they have high reliability and simple design (high pote...
Wastewater-based surveillance for tracing the circulation of Dengue and Chikungunya viruses
Wastewater-based surveillance for tracing the circulation of Dengue and Chikungunya viruses
SummaryBackgroundArboviral diseases, transmitted by infected arthropods, pose significant economic and societal threats. Their global distribution and prevalence have increased in ...
Microalgae growth in industrial wastewater for the production of hydrocarbons
Microalgae growth in industrial wastewater for the production of hydrocarbons
Microalgae have demonstrated unique abilities to photosynthesise the conversion of
biodegradable organic materials and inorganic carbon to value-added biomass because
dissolved nit...
Biomass Production of Azolla pinnata in Different Wastewater
Biomass Production of Azolla pinnata in Different Wastewater
Usage of Azolla pinnata in wastewater treatment has great advantages in the environment. Besides its utilization as a water purifier plant on wastewater, Azolla sp. can be used as ...
Microbial exposure risk assessment of urban wastewater by irrigation of agricultural products
Microbial exposure risk assessment of urban wastewater by irrigation of agricultural products
Abstract
BackgroundThis study was designed to investigate microbial exposure risk assessment and consequences of adverse health effects due to the use of irrigation of fiel...
Comparative analysis of growth and survival of two Indian major carps cultured in recycled cattle wastewater
Comparative analysis of growth and survival of two Indian major carps cultured in recycled cattle wastewater
Aim: The study aimed to evaluate the growth and survival of two Indian major carps (Catla catla, Labeo rohita) in diluted cattle farm wastewater to observe the probability of recyc...
Effect of Magnetic Field and Moringa Seed Powder on Wastewater Treatment
Effect of Magnetic Field and Moringa Seed Powder on Wastewater Treatment
This study was conducted to determine the effect of magnetic field (MF) and moringa seed powder (MSP) on wastewater treatment. Wastewater causes environmental and river pollution t...
Comprehensive Characterization of Organic Pollutants in Wastewater from Acrylic Fiber Production
Comprehensive Characterization of Organic Pollutants in Wastewater from Acrylic Fiber Production
China is the world’s largest producer of acrylic fiber, and the wastewater generated from its production contains a significant amount of biologically refractory organic pollutants...

