Performance Improvement of a Switched Reluctance Motor and Drive System Designed for an Electric Motorcycle

In this paper, the implementation of a switched reluctance motor (SRM) and drive system for the propulsion system of a two-seat electric motorcycle is described. The overall design focuses on the required vehicle speed, acceleration, driving distance, and overall system cost, as well as reliability. The performance of the three-phase 6/4 pole (six-stator pole and four-rotor pole) and four-phase 8/6 pole (eight-stator pole and six-rotor pole) are investigated and compared by static performance analysis and dynamic performance analysis. Their performance is further investigated by finite element analysis. The indirect torque controller in a drive system for optimal torque and efficiency operation is also mentioned. A methodology for rotor position detection and its hardware implementation are also proposed. The designed 3.5 kW three-phase 6/4 pole SRM and its drive system were constructed and tested on the test bench. A maximum efficiency of about 82% could be achieved for the SRM and drive system. It was also installed on a 120-cc electric motorcycle, and the vehicle’s performance was also validated by on-road and dynamometer testing. The maximum vehicle speed reached was 82 km/h, and a cruising distance of about 98 km at a constant speed of 40 km/h was measured.