Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase

View through CrossRef
Pin-on-plate and pin-on-disk wear tests are typically used for assessing the wear behavior of a given material coupling. Such a behavior is frequently described by a wear coefficient k, which is estimated, according to the Archard’s law, as the ratio between the measured wear volume V and the product of the applied normal force F and the sliding distance s, i.e. k=V/(F s). This study demonstrates that such a relationship is correct for pin-on-plate but not for pin-on-disk, particularly for flat-ended pins. Both analytical and finite element models of the two tests were developed, considering three different distances pin-disk axis. As results, wear volumes, pressure and wear depth maps were examined and compared for the same sliding distance. Though this study is focused only on the initial transient part of the wear tests, some interesting aspects arose: i) rotational effect in pin-on-disk tests affects k estimation, especially when the pin is near to the disk axis; ii) a simple analytical function is defined to correct the wear volume estimation for pin-on-disk tests; iii) due to the different sliding distances of contact points in pin-on-disk tests, pressure redistribution occurs with higher values on the inner side (closer to disk axis); the opposite trend is observed in wear depth maps. From a computational point of view, the pin-on-disk problem, only apparently simple, required very small time increments to correctly describe the circular trajectories of points, with high computational costs. Numerical strategies are currently under investigation to extend the study to the steady state phase of both tests.
Title: Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase
Description:
Pin-on-plate and pin-on-disk wear tests are typically used for assessing the wear behavior of a given material coupling.
Such a behavior is frequently described by a wear coefficient k, which is estimated, according to the Archard’s law, as the ratio between the measured wear volume V and the product of the applied normal force F and the sliding distance s, i.
e.
k=V/(F s).
This study demonstrates that such a relationship is correct for pin-on-plate but not for pin-on-disk, particularly for flat-ended pins.
Both analytical and finite element models of the two tests were developed, considering three different distances pin-disk axis.
As results, wear volumes, pressure and wear depth maps were examined and compared for the same sliding distance.
Though this study is focused only on the initial transient part of the wear tests, some interesting aspects arose: i) rotational effect in pin-on-disk tests affects k estimation, especially when the pin is near to the disk axis; ii) a simple analytical function is defined to correct the wear volume estimation for pin-on-disk tests; iii) due to the different sliding distances of contact points in pin-on-disk tests, pressure redistribution occurs with higher values on the inner side (closer to disk axis); the opposite trend is observed in wear depth maps.
From a computational point of view, the pin-on-disk problem, only apparently simple, required very small time increments to correctly describe the circular trajectories of points, with high computational costs.
Numerical strategies are currently under investigation to extend the study to the steady state phase of both tests.

Related Results

Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase
Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase
Pin-on-plate and pin-on-disk wear tests are typically used for assessing the wear behavior of a given material coupling and estimating its wear coefficient using the Archard wear l...
Simulated Wear of Self-Adhesive Resin Cements
Simulated Wear of Self-Adhesive Resin Cements
SUMMARY One of the primary areas of concern with luting agents is marginal gap erosion and attrition. The purpose of this laboratory study was to evaluate bulk and marginal...
Antibiogram of Escherichia coli isolated from semi-closed system farmed Asian clam (Corbicula fluminea)
Antibiogram of Escherichia coli isolated from semi-closed system farmed Asian clam (Corbicula fluminea)
In the present study, antibiogram of Escherichia coli isolated from farmed Asian clam, Corbiculafluminea was characterised. Asian clam or locally known as ‘etak’ is processed to be...
Single-Disk and Double-Disk Viscous Micropump
Single-Disk and Double-Disk Viscous Micropump
The development and testing of two novel micropumps called the single-disk and double-disk viscous pumps are described. A single disk and the top pump housing, or two disks are sep...
Study on the Theory and Method of Combined Casing Wear Resistance in Deep & Ultra-Deep Well Drilling
Study on the Theory and Method of Combined Casing Wear Resistance in Deep & Ultra-Deep Well Drilling
Abstract The high and steep structure of piedmont areas in Tarim oil field bring serious casing wear problem. Casing wear is one of the important reasons for the ...
Reduction of Head Wear on Thin-Film Magnetic Disks
Reduction of Head Wear on Thin-Film Magnetic Disks
It is necessary to reduce head wear to develop future hard disk drives. For this purpose, we have been studying transparent pin-on-disk wear tests on thin-film magnetic disks. We r...
Laboratory and Robot Wear Test Selection for Computer Peripherals
Laboratory and Robot Wear Test Selection for Computer Peripherals
This paper discusses unique wear tests used to address wear problems in computer peripherals. These examples include some for which tribometers were developed and others which invo...

Back to Top